• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.619-623
• /
• 2006

When it comes environmental preservation and economic development throughout all the industries, it is adopted to regulate carbon dioxide emissions in United Nations Framework Convention on Climate Change. And we must be responsible for promoting the eco-friendly and sustainable development because of a registration of the Kyoto protocol. Almost all the domestic buildings have many problems that not only waste the resources and architectural energy, but also are not enough to recycling of the waste. So m this study the environment-friendship is estimated through assuming carbon dioxide emissions. And after indicators are derived through surveying the residential satisfaction, it is carefully thought to develop the Smart Component that increase the length of life and the flexibility and improve the comfortable circumstance in buildings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.119-122
• /
• 2007

In this paper, we propose the method of hardware-design for the division operation of image frame-unit processing in mobile phone camera. Generally, there are two types of the data processing, which are the parallel and serial type. The parallel type makes it possible to process in realtime, but it needs significant hardware size due to many comparators and buffer memories. Compare the serial type with the parallel type, the hardware size of the serial type is smaller than the other because it uses only one comparator, but serial type is not able to process in realtime. To use the hardware resources efficiently, we employ the serial divider since frame-unit operation for image processing does not need realtime process. When compared with both in the same bit size and operating frequency, the hardware size of the serial divider is approximately in the ratio of 13 percentage compared with the parallel divider.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1207-1212
• /
• 2003

As development of the e-commerce, the distributing network for a logistics currency is more complicated. A management of the distributing network (DN) is important factor in distribution planning. The DN can be expressed to distribution center (DC) and the interaction of DC. An internal factor of DC and an external factor to occur by an interaction of DC have many influences on the DN. Therefore, for an efficient DN management plan, analysis of the DN that considered DC and an interaction of DC is required. Until now a study on a viewpoint of supply chain management as resources assignment was performed, but the study on analysis of the distribution network was not performed. This paper propose the distribution network analysis technique that considered DC and an interaction of DC. A proposed technique consists of two steps largely. First of all a DN is expressed with the graph that included an interaction of DC and DC. It uses a reachibility tree, and the following, a DN expressed with a graph is analyzed. Also we presented an example model, and show an usefulness of proposal technique with the analysis of this model.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.126-131
• /
• 2005

Small-angle neutron scattering (SANS) is a very powerful techniques for nanostructure characterization. In this paper, we report the conceptual design and technical description of the 40 in small angle neutron scattering (SANS) insoument which is being developed by KAIST and KAERI for installation at 30 MW HANARO research reactor. For the optimal design of 40 m SANS, a series of computer simulation were pe.to.mod. The Q-.ange of the 40m SANS inst.ument is $0.0005\;\AA^{-1}-1.0\AA^{-1}$ which is a world top-class SANS Q-range. When the cold neutron spectrum used in the simulation is realized, the neutron flux at sample position is expected to be comparable to the current state-of-art SANS instrument in the world.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.223-236
• /
• 2002

In an agent-based system, each agent has its own decision making capability and competes, cooperates, and communicates each other with an agent interface. Virtual manufacturing has characteristics as a typical application area of agent-based system: complex and time-bound decision making and negotiation. The time-boundness influences the choice of decision making models and design of protocols for internal and external negotiation. In this paper, we provide a case study which suggests a time-bound framework for external and internal negotiation between the agents for virtual manufacturing environment. We illustrate decision making model selection strategy and the system architecture of the agent-based system for the complex and time-bound environment.

• Journal of Technology Innovation
• /
• v.20 no.3
• /
• pp.199-228
• /
• 2012

While there are increasing requests for open innovation, prior studies have focused mainly on the utilizing the external sources. This study suggests to broaden the way of measuring openness to include the innovation management factors and output besides of utilizing the external sources. Additionally, the new measures will compare the status of openness in small and medium enterprises between Korea and Japan. There is greater differences in openness between SMEs and big firms in Japan than ones in Korea. Although SMEs in Japan utilize the external knowledge sources more actively than ones in Korea, they show less openness from the perspective of managerial factors such as metric for open innovation, collaboration system, investment for collaboration, and performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.117-123
• /
• 2003

In succession to the previous paper, the tritium injection system and the regeneration system of the tritium handling system are presented. Both systems should be placed inside glove boxes since there can be potential leakage of tritium from these systems. The tritium injection system should be capable of measuring the exact amount of the injected tritium to keep track of the tritium inventory. The tritium injection system is designed to recover the remaining tritium from the system after injection for the minimization of tritum release to the environment as well as for the recovery of precious resource. TRS equipment such as MS, Ni catalyst bed, and metal getter are regenerated with a standalone regeneration system. Unlike other equipments which can be regenerated by heating and purging with appropriate gas, regeneration of the metal getter used to recover tritium is somewhat complicated.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.9-18
• /
• 2010

High performance is required with small size and low power in the mobile embedded system. A CORDIC algorithm can compute transcendental functions effectively with only small adders and shifters and is suitable one for the mobile embedded system. However CORDIC unit has performance degradation according due to iterative inter-rotations. Adder design is an important design unit to be optimized for a high performance and low power CORDIC unit. It is necessary to explore the design space of a CORDIC unit considering trade-offs of an adder unit while satisfying delay, area and power constraints. In this paper, we suggest a CORDIC architecture employing a heterogeneous adder and an optimization methodology for producing better optimal tradeoff points of CORDIC designs.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.155-163
• /
• 2007

In this paper, Though sensors of Ubiquitous Middle-ware System based on RFID/USN can usually be reacted from six mouths to two years, they can be exhausted their power of storage battery only one day by communication rates and ranges. That is, the lifetime of sensor node is depended on how much spending power under wireless communication that can communicate its sensing data to its destination. Therefore, it is necessary that each sensor should be designed the Routing path to its destination, in order to remote collecting data. But, in order to improve lifetime of sensor node and modify inner setting, it is opposite to simple searching path method of sensor node by entering external commands. accordingly, 1:n sensor arrangement of n form command and data send-receive that is possible simulation do without interference other sensors and research to different sensor data analysis and conversion ways to convert Sensing data that accept from sensors to actuality information.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.269-276
• /
• 2016

Public Safty-LTE(Long Term Evolution) is being deployed in the direction of reducing cost by using both of municipal network and commercial network. However, LTE Network is difficult to ensure the survivability during the information communication infrastructure failures. In addition, it is vulnerable in communication coverage of inside buildings and underground. In this study, we propose to implement effectively the network survivability technique through the convergence to the proven technology. As the advent of the IoT Age, smart sensors which are embedded in the environment and the things will be able to provide a useful infrastructure for ensuring the network survivability. Based on the feature of the smart sensor, we designed the sink node architecture to guarantee the network survivability in disaster situation through the convergence of the small cell technology and extension of wireless network coverage technology. The computing power inherent in the environment is a valuable resource that can be utilized in the disaster situation.