• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.2
• /
• pp.61-67
• /
• 2005

In this study a new growing method of silicon nitride whiskers in the inside of large pores made intentionally during the sintering was conducted. Pore size, pore vol%, and nitrogen pressure were used as experimental variables. Silicon nitride whiskers were well grown in the inside of pores with low pore vol% range from 14 to 27 but not grown with high pore vol% such as 39 and 50. On the other hand, pore size and nitrogen pressure did not have any influence on the whisker growth. Therefore the most important factor to grow silicon nitride whisker in the inside of large pores during sintering was to make pores isolated or closed.

• Composites Research
• /
• v.29 no.2
• /
• pp.66-72
• /
• 2016

Porosity in polymer matrix composites increases rapidly during thermochemical decomposition at high temperatures. The generation of pores reduces elastic moduli and failure strengths of composite materials, and gas pressures in internal pores influence thermomechanical behaviors. In this paper, micromechanical finite element analysis is carried out by using two-dimensional representative volume elements for unidirectionally fiber-reinforced composites with porous matrix. According to the state of the pores, effective elastic moduli, poroelastic parameters and failure strengths of the overall composites are investigated in detail. In particular, it is confirmed that the failure strengths in the transvers and through-thickness directions are predicted much more weakly than the strength of nonpored matrix, and decrease consistently as the porosity of matrix increases.

• Composites Research
• /
• v.33 no.3
• /
• pp.147-152
• /
• 2020

In this study, void behavior of composite laminate by local internal pressure gradient due to structural geometry and surface film application condition was experimentally evaluated through fabrication of spar/skin integrated structure specimens. Viscosity comparison and thermal analysis for both carbon fiber prepreg and surface film were conducted and cure characteristic and rate difference were analyzed. 2 types of spar/skin integrated structural specimens were prepared based on different application condition of surface film. Subsequently, those specimens were evaluated through visual surface inspection, non-destructive and destructive inspection. In a specimen #1 with full application of surface film, low pressurized area of composite laminate created by pressure gradient of structural geometry had voids. It exhibited that voids could not be evacuated and were locked in cured laminate by the influence of pre-cured surface film with relatively faster cure rate. In a specimen #2 without surface film, it revealed that all internal voids disappeared in the cured laminate. Therefore, it is verified that surface film acts as barrier film preventing void movement and evacuation during autoclave cure.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.51-51
• /
• 2002

나노기공물질은 특정 기반물질(matrix) 내부에 대략 나노미터크기의 기공을 함유하고 있는 물질이며 나노기공물질의 특성은 기반물질의 특성과 더불어 기공의 형태, 크기, 분포에 의해서 결정된다. 나노기공물질의 기공에 대한 정보를 측정하는 방법으로는 TEM, 흡착법, FE-SEM과 더불어 중성자 또는 X-ray 빔의 산란을 이용하는 소각중성자산란 (Small-Angle Neutron Scatering, SANS), 소각 X-ray 산란 (Small-Angle X-ray Scattering, SAXS), 중성자반사율측정 (Neutron Relfectimetry, NR), X-ray 반사율측정 (X-Ray Reflectometry, XRR) 등이 사용되고 있다. 본 발표는 대략 1 nm - 100 nm 영역의 bulk 구조와 층상구조를 측정할 수 있는 소각 중성자 산란과 중성자 반사율 측정기법을 이용한 나노기공 측정기술을 다룬다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.511-517
• /
• 2016

Current oil-type potential transformers for trains are filled with insulating oil, which could have problems like explosions due to rising inner pressure during train operation. Therefore, mold and dry-type potential transformers are being developed to prevent explosions. One problem in manufacturing mold-type transformers is preventing void formation around the coiled core inside the mold during epoxy filling, which could cause an electrical spark. Micro voids can remain in the resin after filling, and macro voids can occur due to the structure shape. A transformer that is being developed has a cavity at the junction of the core and the coil for better performance, and when highly viscous epoxy flows inside the cavity channel, macro voids can form inside it. Therefore, in this study, the free-surface flow of the mold filling procedure was analyzed numerically by applying the VOF method. The results were used to understand the phenomena of void formation inside the cavity and to modify the process conditions to reduce voids.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.43-49
• /
• 2006

The properties, behavior and reliability of the residual void in blind via hole(BVH) were carried out for the shape of BVH using the void extraction process. The residual void was perfectly removed in the specimens applied by the void extraction process, which was improved by 40% rather than the conventional process. The residual void in BVH was to be eliminated under a condition of 1.5 atm for more 30 sec with regardless of the shape of BVH. It was also observed that the residual void in BVH was not formed after the reliability test with JEDEC standard.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.92-98
• /
• 2017

Porosity in polymer matrix composites generated during pyrolysis process affect the thermomechanical behavior of the composites. In this paper, multislice finite element models for the porous composite materials are developed, and poroelastic and failure analysis for these models are performed. In order to investigate the three-dimensional effects, finite element meshes are modeled considering different porosity(up to 0.5) and the number of slices (up to five). As a result, effective Young's moduli and poroelastic parameters exhibit the maximum differences of 74.0% and 442.1% with respect to porosity respectively, and 98.7% and 37.2% with respect to the number of slices. First and last failure strengths are decreased 88.2% and 90.0% with respect to porosity respectively, and 53.8% and 171.8% with respect to the number of slices.

• Composites Research
• /
• v.17 no.2
• /
• pp.34-39
• /
• 2004

In this paper, a modified and representative unit cell model was employed to study the tensile behaviour of closed-cell metallic foams with varying spatial density distribution as well as material imperfections. The density variation was assumed to follow a statistical probability distribution of the Gaussian type. A multiple cell finite element model, utilising the modified unit cell, was developed. The model exhibits deformation patterns similar to those observed in tensile testing. The nominal stress-strain curve obtained from quasistatic tensile of the foam was compared with experimental findings and was found to be in good agreement in the scheme of maximum strength only if the appropriate density distribution and volume fraction of internal imperfections are taken into account. Moreover, maximum tensile strength of the aluminium foam was found to be more sensitive to the volume fraction of imperfection than standard deviation of the density.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.190-190
• /
• 2015

본 연구에서는 AZ31 마그네슘 합금의 내식성을 향상시키기 위하여 플라즈마 전해산화(PEO, plasma electrolytic oxidation)법을 이용하여 다양한 용액에서 양극 및 음극 펄스전류를 인가하여 형성하였다. PEO피막 내부에 형성된 기공의 모양 및 크기를 에폭시 레플리카법을 이용하여 관찰하였다. PEO 피막 내부의 기공의 크기는 용액의 pH가 증가할수록 작아졌으며 균열의 크기는 증가하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.240-240
• /
• 2003

탄소재료의 가스화속도는 근본적으로 활성자리의 수와 관련되어 있으며, 또한 가스화속도는 활성자리 뿐 아니라 확산제한에 따라 달라진다. 대부분의 탄소재료의 활성화 초기단계는 제한된 활성자리 때문에 반응속도는 느리고, 다음 단계는 총 활성자리가 증가하여 반응속도는 급격히 증가하고, 마지막으로 활성자리가 감소하여 활성화 속도는 감소한다. 이러한 sigmoidal특성을 나타내는 활성화 단계를 기공발달과정으로 설명하면, 활성화 초기에 탄소재료 내부에 이미 존재하는 닫힌 기공이 열리고, 일단 기공이 열리면 성장하게 된다. 이렇게 기공 수가 증가하는 것 뿐 아니라 기공 직경이 증가하여 활성화 과정이 진행될수록 비 표면적 및 기공부피는 증가하는데 이런 일련의 과정을 통하여 활성자리 수는 증가하고 또는 감소한다. 이렇게 기공이 발달하는 과정은 각각의 활성화 단계에서 탄소재료의 비 표면적 측정으로 알 수 있으며, 전반적인 산화속도 변화를 측정하여 반응단계를 추정하게 된다. 대부분의 연구자들은 반응 전체의 평균 산화속도를 측정한 후 활성화 에너지를 구하여 반응조절단계로 활성화 기구를 설명한다. 이 연구에서는 활성화 과정 중에 발생하는 중량감소 단계, 즉 각각의 활성화 단계에 따라 달라지는 반응속도상수를 측정하고, 반응단계별 활성화 에너지를 비교 해석하여 피치계 탄소섬유의 기공발달에 영향을 미치는 활성화 기구를 고찰하고자 하였다.