• Journal of the Korean GEO-environmental Society
• /
• v.18 no.3
• /
• pp.25-30
• /
• 2017

This paper introduces a novel method to quantify the morphological evolution of the strain response envelope. The strain response envelope is defined as an image in strain increment space corresponding to the unit stress input in stress space. Based on the shape of strain response envelopes, the deformation characteristics of soils can be described using the framework of elastic-plastic theory. Fourier descriptor analysis was used to investigate the morphological characteristics of strain response envelopes. The numerical results show that when the stress input remains in the initial yield surface the Fourier descriptors remain constant. Once the stress input crosses the initial yield surface, every descriptors deals in this study change. Numerical and experimental results of this study show that clear yielding response is only found in natural block samples. Among the Fourier descriptors, the descriptor called as asymmetry is the best for detecting the yield and is minimally sensitive to the number of input stress paths.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.2
• /
• pp.15-27
• /
• 2009

토지이용변화가 수질에 미치는 영향을 평가하기 위하여 비점오염모형이 광범위하게 사용되고 있다. 본 연구에서는 최적관리기법이 수문 수질에 미치는 영향을 평가하기위한 통합모형시스템을 개발하였다. 통합모형시스템은 DANSAT (Dynamic Agricultural Non-point Source Assessment Tool)과 사용자 인터페이스로 구성되어 있다. DANSAT은 분포형 연속 강우사상 모형으로서 농업소유역에서의 유출량, 유사량, 농약 물질의 이동기작 등을 모의한다. DANSAT은 크게 동적변수 부모형, 수문 부모형, 유사 이용 부모형, 농약 물질 이동 부모형등 4개의 부모형으로 구성되어있다. 동적변수 부모형은 토양의 특성, 작물의 생장 및 작물 잔여물질의 분해 등을 모의하는 하부모형으로 구성되어있으며, 토지 이용 변화에 관계되는 내부 변수들의 시간적 변화를 모의한다. 수문 부모형은 차단, 증발산량, 침투량, 침루량 등을 모의하는 격자 단위 프로세스와 지표유출, 중간유출, 기저유출 및 하천에서의 물의 이동을 모의하는 유역 단위 프로세스로 구성되어있다. 유사 이동 부모형은 세류간 (interrill) 토양입자의 분리, 세류 (rill) 및 하천내의 토양분리, 운송가능량 등을 모의하며, 농약 물질 이동 부모형은 농약의 분해, 평형, 식물에 의한 흡수, 침출 등을 고려하여 농약 물질의 이동을 모의한다. 입력변수는 최적관리기법의 시 공간적인 변화를 고려할 수 있도록 계층구조로 구성하였다. 유역출구에서의 결과 출력 뿐만 아니라, 유역전체에 걸쳐 지표면과 지하수면 사이에서 물 및 오염물질의 이동량 분석을 위한 출력 및 격자단위의 상세 결과 출력을 통하여 최적관리기법을 평가하고 분석할 수 있다. 한편, 사용자 인터페이스는 모형의 구동을 위해 요구되는 광범위한 시 공간 입력 자료를 기존에 존재하는 데이터베이스를 이용하여 생성할 수 있도록 개발되었다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.23-27
• /
• 2011

Due to the rapid development of construction technology with effective land utilization in this nation, many tunnels were and are being built across the country. However, the smoke and the heat generated from tunnel fire are the most important critical factors which may results in both massive personal injury and property damage, especially, due to the closed surrounding of the tunnel. Considering this particular nature of the tunnels, this study aims to install a fire detection system using an optic fiber cable to measure the temperature changes, compare, and analyze the resulted values with the times of temperature changes of the sensor by performing fire simulations under the same condition as a real fire test. From the results, it has been found that the temperature sensor detects a fire occurrence and generates an alarm within one minute after ignition for both a real fire test and a fire simulation alike, and also that the characteristics of temperature changes of the sensor has close relations with the speeds of the currents inside the tunnel. In addition, considering the tunnel fires can affect the evacuation efficiency and the fire extinguishing activities of the fire brigade inside the tunnel, the temperature sensor must be able to search and find the locations and directions of the fires correctly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.454-454
• /
• 2012

Magnetron sputtering에서, 영구자석의 자속은 target 표면 가까이에 전자를 구속한다. 구속된 전자는 Ar중성기체와 충돌하여 Ar이온을 발생시킬 수 있으므로, target 근처에서의 플라즈마 밀도를 높여, 자석이 없을 때보다 낮은 압력 또는 낮은 전압에서 방전할 수 있다. 구속 전자가 밀집된 공간에서 sputtering 현상이 주로 발생하기 때문에, planar target을 사용할 경우에는 target이 불균일하게 식각되어 target의 사용효율이 좋지 못하다. 이에 대한 한 가지 대안은 target을 원통형으로 만들어 회전시키는 것이다. Cylindrical target 의 내부에 위치한 영구자석은 고정시키고, target만을 회전시키면 비교적 균일하게 식각되므로 target의 사용효율을 높일 수 있다. 본 연구에서는 기존의 planar target에 대한 Particle-In-Cell Simulation을 Cylindrical target 에 적용시키기 위한 방법을 알아본다. 또한, 개발된 Simulator를 이용하여, Sputtering 조건의 변화에 대한 I-V curve의 변화를 살펴본다.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.301-325
• /
• 2003

Urban residential area, one of the main subjects of urban and architectural studies, can be analyzed accurately and rapidly with CIS. (Geographic Information System) And the applications of GIS in urban studies are too macro to be explained in architectural terms and the ones in architectural studies are not so much active rather be used as a secondary means. So the studies in urban-architectural scale are very useful in many ways. This study explores urban-architectural possibilities of analytic capabilities of GIS through the analysis of spatial characteristics of residential area in terms of land price according to parcel attributes. It is found, firstly, that the parcel attributes have relations with land price and its distribution patterns. Secondly, it is verified that the visualization capability of GIS can be a very useful method of analysis through user-interface effects in urban-architectural scaled analysis.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.61-68
• /
• 2007

The purpose of this study analyzes heat flows and fire behavior through a reduced-scale model experiments about change of wind velocity in underground life space. When the wind velocity is increased the temperature rise time of the fire room was risen fast. And temperature of fire room was increased. And increase of wind velocity displayed maximum temperature at an opening of the fire room. Heat flows by fire spread increase size of smoke occurrence and flame, and displayed high temperature distribution in passageway than inside of neighborhood department promoting eddy flow spread as wind velocity increases. Finally, heat flows are decided by wind and wind velocity at fire of underground life space, and Wind velocity increases, temperature increase and decrease could confirm that is gone fast.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.199.1-199.1
• /
• 2012

TRIO-CINEMA(TRiplet Ionospheric Observatory-Cubesat for Ion, Neutron, Electron & MAgnetic field)는 지구근접공간에서의 미세 자기장 변화 및 중성입자의 검출을 목적으로 경희대학교와 UC Berkeley가 공동 개발하는 초소형위성이다. 초소형위성은 내부 공간이 협소하여 효율적인 공간배치 및 위성체발사 시 진동에도 견딜 수 있도록 harness가 제작되어야 한다. CINEMA는 OBC, EPS, 배터리, 수신기, IIB(Instrument Interface Board), MAGIC(MAGnetometer Imperial College) board, HVPS(High Voltage Power Supply)로 구성된 avionics bus와 MAGIC, STEIN(Supra Thermal Electron, Ion, Neutral)의 payload, Solar panel, UHF와 S-band 안테나로 구성되어 있다. Solar panel에서 생산된 전력은 EPS를 통해 배터리에 저장되고 PC104를 통해 avionics stack의 각 board로 전력이 분배된다. IIB는 탑재체 파트와 연결되어 이를 제어하고 HVPS에서 STEIN에 공급되는 고전압은 특수 와이어를 통해 연결되며 UHF 안테나와 S-band 안테나는 RF 케이블로 수신기와 송신기가 연결되어 있다. 각각의 harness는 케이블타이와 lacing tape로 위성체와 고정되며 커넥터는 고정 지지대를 제작하여 나사로 체결하였다. CINEMA에 적용된 harness는 진동시험과 열진공시험을 통해 harness와 시스템의 안정성이 검증 되었다.

• Archives of design research
• /
• v.15 no.4
• /
• pp.129-138
• /
• 2002

Against the projection that the volume of filing would be drastically cut in the Information Age, the needs for filing in this age increases gradually. In this respect, it is critical to study the design of office filing system furniture. Through this study, we could find out what shall be the major requirements for office lijillg system furniture. This study would also provide important raw data for developing more efficient and more satisfactory office filing system furniture. Subject for this study includes 6 representative filing system furniture including a lateral file cabinet. For the design analysis, we used catalogues of foreign and domestic office furniture, particularly filing system furniture. The analysis is classified into the following six categories such as size, shape, color, material, handle, and filing method, mobility, flexibility, and so on. According to the analysis of office furniture in the market, requirements of furniture fit for office environment are found to be as follows. -Instead of the fixed-type furniture, movable furniture is more adaptable to the ever-evolving office environment. -Design the office furniture in accordance with a standardized module would provide a more unity and diversity of arrangement in space particularly when it is arranged with other furniture. -Development of more diverse color, which ranges from achromatic color to wooden color to other various colors, is more favored in the ever-changing office environment. -As the grip provides a variety of image to the furniture let alone its function, its development is required to be more diverse and more conforming 10 the design of Ihe furniture. -The filing methods in general are with drawer and shelf, among which the drawers design is usually fixed. However, under the evolving office furniture environment, the design of Ihe drawer, bolh inlerior and exterior, shall be more diverse and flexible.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.120-141
• /
• 2015

This paper is a preliminary study of architectural characteristics of Jangdae (general's podium), which shows one of the technical changes in fortification of Joseon Dynasty. As a facility for commands of generals and training for officers and men, it was located inside a fortress. Although it is not certain when the first Jangdae was built, the number of them dramatically increased around 18th century. Since the top priority function of the Jangdae was the prospect, it was installed at the hilly spot with open architecture. In addition, the open structure of Eupseong fortress towers on the riverside banks could simultaneously offer the functions as viewing around and Jangdae. Since Jangdae was also a place for military drills and reviews of soldiers, a wide podium was positioned at the front to muster the soldiers. This feature was standardized in the space organization of Jangdae in Joseon, and a mere podium was installed unless the topographic restrictions allows enough space. On the other hand, as a place for a commander, the hierarchy of the Jangdae was revealed through a variety of architectural characteristics. The hierarchy was assigned to the commander's space through the altitude difference, and diverse ornaments were added to show a sense of class. The floor plan of the Jangdae building can be largely categorized into rectangle and square, and the typical sizes of the former are $5{\times}4$ Kans (traditional measuring unit between two columns) and $3{\times}2$ Kans. Out of these two types, buildings of $5{\times}4$ Kans were found in flat land and eupseong fortresses with large space, and the relatively smaller ones of $3{\times}2$ Kans in mountain fortresses. All buildings of square floor plan had $3{\times}3$ Kans style, and the center Kan was twice wider than the side Kan to make the central space wide. It seems that the purpose was to secure the interior space of the upper story because the center Kan accounts for the floor area of the upper story. Some Jangdae's had internal story to form overhead space. The multi-roofed tower style with eaves attached to the upper and lower story is found exclusively in Jangdae. The buildings shows the Onkanmulim style which extends Naejinju (inner column) of the lower story to be the Byeonju (outer column) of the upper story, and the log-framed floor in the upper floor was structured by inserting the Changbang (connecting beam) between the Naejinju's and joining the log frames. In addition, the towers in eupseong fortresses had log-framed floor in the upper floor by setting up the high Nuhaju (column underneath a roof) and joining Cheongbang to the upper part of the column while it cannot be regarded as multi-roofed because only the upper part has a roof.

• Journal of the Korean association of regional geographers
• /
• v.9 no.4
• /
• pp.519-533
• /
• 2003

The U.S. Conservation Reserve Program (CRP) resulted in the conversion of approximately 14.8 million ha(36.5 million acres) of cropland to grassland, woodland, and other conservation uses throughout the U.S. between 1986 and 1992. One of the major results of CRP has been the addition of millions of hectares of potential wildlife habitat. primarily as grassland. In this study, we examined regional changes in landscape structure caused by the introduction of CRP. Utilizing multi-seasonal Landsat Thematic Mapper imagery, we produced maps of cropland and grassland for the pre- and post- CRP enrollment periods for a six-county region in southwest Kansas. We then applied post-classification differencing to identify regions of cropland that had been converted to CRP. Using the FRAGSTATS spatial pattern analysis program, we calculated a variety of spatial statistics to analyze changes in landscape structure due to CRP. The major impact of CRP in the six-county study area has been the reversal of an overall trend of grassland habitat fragmentation. From the standpoint of potential wildlife habitat, the introduction of CRP has greatly increased the number of patches, mean patch size, and the interior or core area of grassland patches. In addition, CRP has increased connectivity and aggregation between grassland patches, potentially important factors for species of conservation interest, particularly those that require larger expanses of unbroken habitat. Finally, the distance between neighboring patches of grassland has decreased, reducing travel distance between patches. Clearly, the introduction of CRP has substantially modified the spatial structure of the southwest Kansas landscape, with important implications for wildlife habitat.