Journal of the Institute of Electronics Engineers of Korea TC
/
v.43
no.3
s.345
/
pp.84-94
/
2006
In this paper, we propose the algorithm to reduce guard time of UWB MAC time slot for throughput gain. In the proposed draft by multiband ofdm alliance (MBOA), Guard time of each medium access slot (MAS) is composed of shortest inter-frame space (SIFS) and MaxDrift which is the time caused by maximum frequency offset among devices. In this paper, to reduceguard time means that we nearly eliminate MaxDrift term from guard time. Each device of a piconet computes relative frequency offset from the device initiating piconet using periodically consecutive transferred beacon frames. Each device add or subtract the calculated relative frequency offset to the estimated each MAS starting point in order to synchronize with calculated MAS starting point of the device initiating piconet. According to verification of simulations, if the frequency offset estimator is implemented with 8 decimal bit, the ratio of the wasted time to Superframe is always less than 0.0001.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.16
no.3
/
pp.187-201
/
2016
The purpose of this study was to analyze the smart phone usage experience structure for college students. The phenomenology approach was used by conducting 4 times in-depth interviews with the 7 college students age between 20~23. Collected Data was analyzed by Giorgi's phenomenological method. There were 4 general structure descriptions and 28 themes. General structure descriptions were 'Dependence on smart phone', 'Phenomenon of smart phone usage', 'Results of smart phone usage' and 'Relationship between stress and smart phone'. Themes consisted of 'Ambivalence', 'Positive feelings for smart phones', 'Separation anxiety', 'Negative feelings for smart phones'. 'Dependent feelings for smart phones', 'A sense of unity with smart phones', 'Helpful for my life', 'Deeply involved with my life', 'Useful tool in my life', 'Study, communication, relaxation and health care', 'Maintain personal relationship', 'The most important thing in my life', 'Shallow relationship stress', 'Interference with personal relationship', 'Forming a negative relationship', 'Invasion of privacy', 'Forming a Incorrect relationship', 'Unwanted participation', 'No effort to improve relationship', 'Poor concentration', 'Interference with academic study', 'Study assistance', 'Limited help for study in depth', 'Shelter from the stress', 'Amplification of the stress', 'Obsessive focus', 'Feel separation for the reality' and 'Waste of time'. Smart phone usage make college students dependent on smart phones and had negative influence on both personal relationship and academic results. Usage of smart phone also amplified stress. Therefore we need fundamental principles on usage of smart phone and propose to build cultural etiquette that provides reasonable way to use smartphone.
Sun, Young Ghyu;Kim, Soo Hyun;Lee, Dong Gu;Park, Sang Hoo;Sim, Issac;Hwang, Yu Min;Kim, Jin Young
Journal of IKEEE
/
v.22
no.3
/
pp.829-835
/
2018
Recently, studies have been actively conducted to reduce spare power that is unnecessarily generated or wasted in existing power systems and to improve energy use efficiency. In this study, smart meter, which is one of the element technologies of smart grid, is implemented to improve the efficiency of energy use by controlling power of electric devices, and predicting trends of energy usage based on deep learning. We propose and develop an algorithm that controls the power of the electric devices by comparing the predicted power consumption with the real-time power consumption. To verify the performance of the proposed smart meter based on the deep running, we constructed the actual power consumption environment and obtained the power usage data in real time, and predicted the power consumption based on the deep learning model. We confirmed that the unnecessary power consumption can be reduced and the energy use efficiency increases through the proposed deep learning-based smart meter.
The observational design and construction method in tunnels is becoming important recently. In many tunnels, enormous cost and time are consumed to cope with the failing or sliding of rock blocks, which could not be predicted because of the complexity of rock discontinuities. It is difficult to estimate the properties of rock masses before the construction. In this paper, a new observational design and construction method in tunnels are proposed, and then applied to the example of the very large cross section tunnel based on actual discontinuity information observed in situ. The items examined in developing a program for the new observational design and construction method are the following ones: generality, precision, high speed, and friendly usability. At the very large cross section tunnel, 7 key blocks were judged to be unstable because they could not be supported by standard supports. Supplementary supports were installed to these 7 key blocks before the excavation. It is possible to detect key blocks all along the tunnel exactly by using the numerical analysis program developed for the new observational design and construction method in the very large cross section tunnel. This computer simulation method with user-friendly interfaces can calculate not only the stability of key blocks but also the design of supplementary supports.
The purpose of this study is to survey of specialists cognition to authorize credits for the same subjects in entering a department of the same area in college among technical high school graduates. Today with generalized college education, about 80% of technical high school graduates enter college. Therefore, authorization of credits for the same subjects is necessary to reduce educational waste in terms of articulation among technical high schools, junior colleges and universities. In this study, a survey was conducted with 100 specialists in technical education, including technical high school teachers, researchers, and professors at junior college or technical college in university, getting answers from 84 subjects (81.25%). The results of this research can be summarized as follows: First, it is valid to authorize credits for all practical subjects completed in technical high school when technical high school graduates enter the same department at college but most of junior college professor unsuitable response. Second, it is valid to authorize credits through its own prescribed test for the same subjects when technical high school graduates enter the same department of engineering at junior college or technical college in university but opposed 62.5% of junior college professor. Third, it is most of respondent valid to authorize credits for the same subjects if results of its own examination for authorization by university are at a fixed level or higher when technical high school graduates are admitted as a junior at the same department in technical college of university after graduation from the same department at junior college.
KSCE Journal of Civil and Environmental Engineering Research
/
v.35
no.2
/
pp.455-464
/
2015
Investments into existing cultural facilities are determined based on administrative district-based indices like population and area. Such macro judgment indices, however, fail to consider accessibility of cultural facilities from neighboring administrative districts and thus create problems including wasted budgets and duplicated investments. More recently, the government has made it a goal to increase the level of citizen awareness of these facilities, but achieving this requires the integration of neighboring administrative districts such that characteristics including transportation network and buildings are reflected in a comprehensive manner. This research therefore looks into Urban Network Analysis (UNA) as a means to investigate accessibility of cultural facilities. Use of UNA will make it possible to analyze the transportation network as well as building distribution, explained by building density, settled population, and other important building factors, in tandem, leading to the concentration of cultural facilities and the surrounding economic district being more properly reflected, and thus allowing for greater explanatory power in determining the level of accessibility. To test this, four target research districts were chosen from within the Gyeonggi Province and analyzed in terms of the accessibility of their everyday cultural facilities. Of the four districts of Gunpo, Anyang, Uiwang, and Gwacheon, accessibility of the first two districts, was found to be high, while accessibility was found to be relatively low for the latter two districts. This finding indicates that cultural facilities investments should be concentrated in the districts of Gunpo and Anyang.
Journal of the Korea Organic Resources Recycling Association
/
v.8
no.4
/
pp.67-77
/
2000
For successful privatization of environmental facility, a sound environmental policy is required to satisfy social motivation and economic. The primary purpose of environmental facility is not profit, but to supply a good quality service, an efficient management tool is needed to run the facility. In foreign countries, the privatization policy was originally based on the principle of complete competition achieving economic effiency. There were efficient cooperation and division of labor between civillian and public sector. First of all, the local government had independant budget. But, we found that the environmental facility have two important problems, the first is low effiency of operation and the second is comsumed to government finances as a homemade rate 50% in the technic application For a successful privatization of the environmental facility, The law of private capital introduction should be amended to promote fund raising. There are some other strategies ; overcoming of Nimbyism, research development of the privatization, field trip to the successful foreign environmental facilities. To support an efficient privatization policy, the environmental budget should be managed by cost-benefit analysis.
Journal of the Korea Academia-Industrial cooperation Society
/
v.18
no.10
/
pp.531-538
/
2017
In the case of hydraulic pressure type fuse, we accept or reject certain product lots by considering the number of defective products in the operating pressure test. Generally, this procedure, known as 'The inspection by attributes', has been most commonly used in the field of quality assurance of products. However, the method of inspection by attributes suffers because it tests more samples than inspection by variables. Even though the quality of the products has remained stable in the process condition, the same number of samples is required for every lot, which wastes time and money. This paper suggests that the lot acceptance procedure is changed from inspection by attributes to inspection by variables. We can calculate the statistical tolerance percent of defectives and compare this to the Acceptable Quality Level (AQL) in order to save money and time. It is also easier to monitor and control the quality of products by using the process capability index and x-bar charts. In conclusion, the procedure delivers mutual benefit to both the customer and the producer by securing high quality products and reference data.
Existed pattern analysis algorithms in data streams environment have researched performance improvement and effective memory usage. But when new data streams come, existed pattern analysis algorithms have to analyze patterns again and have to generate pattern tree again. This approach needs many calculations in real situation that needs real time pattern analysis. This paper proposes a method that continuously analyzes patterns of incoming data streams in real time. This method analyzes patterns fast, and thereafter obtains real time patterns by updating previously analyzed patterns. The incoming data streams are divided into several sequences based on time based window. Informations of the sequences are inputted into a hash table. When the number of the sequences are over predefined bound, patterns are analyzed from the hash table. The patterns form a pattern tree, and later created new patterns update the pattern tree. In this way, real time patterns are always maintained in the pattern tree. During pattern analysis, suffixes of both new pattern and existed pattern in the tree can be same. Then a pointer is created from the new pattern to the existed pattern. This method reduce calculation time during duplicated pattern analysis. And old patterns in the tree are deleted easily by FIFO method. The advantage of our algorithm is proved by performance comparison with existed method, MILE, in a condition that pattern is changed continuously. And we look around performance variation by changing several variable in the algorithm.
Spatial data warehouses provide analytical information for decision supports using SOLAP (Spatial On-Line Analytical Processing) operations. Many researches have been studied to reduce analysis cost of SOLAP operations using pre-aggregation methods. These methods use the index composed of fixed size nodes for supporting the concept hierarchy. Therefore, these methods have many unused entries in sparse data area. Also, it is impossible to support the concept hierarchy in dense data area. In this paper, we propose a dynamic pre-aggregation index method based on the spatial hierarchy. The proposed method uses the level of the index for supporting the concept hierarchy. In sparse data area, if sibling nodes have a few used entries, those entries are integrated in a node and the parent entries share the node. In dense data area, if a node has many objects, the node is connected with linked list of several nodes and data is stored in linked nodes. Therefore, the proposed method saves the space of unused entries by integrating nodes. Moreover it can support the concept hierarchy because a node is not divided by linked nodes. Experimental result shows that the proposed method saves both space and aggregation search cost with the similar building cost of other methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.