• Composites Research
• /
• 제24권4호
• /
• pp.1-4
• /
• 2011

수정된 Hummer's 방법으로 제조된 산화그래핀(graphene oxide, GO)을 이용하여 PMMA와 Nylon 6,6에 분산시켜 각각 복합재료 섬유와 필름으로 제조하고 동적기계적 물성과 인장특성을 분석하였다. 동적기계적 분석과 인장 특성에서 GO-PMMA 복합재료 섬유는 GO의 효율적 기계적 물성 보강 효과를 확인 하였으나 Nylon 6,6 복합재료는 제조과정에서 사용된 포름산의 낮은 pH로 인해 산화그래핀의 분산안정성이 저하되어, 낮은 보강효율을 보임을 알 수 있었다.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.47-53
• /
• 1997

To improve the interfacial bonding of carbon fiber-nylon 6 composite, carbon fiber(CF) were oxidized by nitric acid treatment, and two types of graft polymer(GP) of nylon 6-g-polyacrylamide (PAAm) -water dispersable GP(WDGP) and m-cresol solu ble GP(CSGP) were treated as coupling agents. Introduction of polar groups such as -COOH, -OH, etc, on the surface of the oxidized CF was confirmed by IR spectra. The stem polymer of nylon 6 in the coupling agent (GP) could be compatible with'matrix nylon 5, and the grafted branch of PAAm on GP could react to the polar groups on the oxidized CF in composite. The interfacial strength was measured by the transverse tensile test to the fiber direction for single CF embedded nylon 6 film especially prepared and by the pull-out test method. The interfacial strength of the composite reinforced with oxidized CF is greater than that reinforced with unoxidized CF. The interfacial strength of the composite was increased by treatment of coupling agents(GPs) considerably, and the increasing tendency by the WDGP is greater than that by the CSGP. The optimum conditions of coupling agent treatment are as follows: the concentration, adsorption tlme of GP, and curing temperature are 2%, 20 minutes, and $170^{\circ}$, respectively.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.11-19
• /
• 2005

Textile dyeing with vat dyes has the highest color fastness although one and the same dye of all vat dyes cannot always satisfy every color fastness requirement. So we examined cotton, nylon 6, and polyester fabrics dyed with vat dyes. Cotton, nylon 6 and polyester fabrics were dyed with vat dyes such as C. I. Vat Blue 1, Blue 19, Black 9, Green 1, Orange 2, and Violet 1 containing sodium hydrosulfite and NaOH. Oxidation were carried out by a sodium peroxoborate after dyeing. The dyed materials were soaped at the boil after oxidation. Especially hydrolysis and overreduction for dyed polyester with vats dyes containing -NHCO- and -NH- groups such as C. I. Vat Blue 6, Black 25, Black 27, Red 10, and Green 3 occurred. It seems that these phenomena are due to a high dyeing temperature. Wash and rubbing fastness of nylon are higher than that of cotton and polyester. Light fastness of cotton is higher than that of polyester and nylon.

• 한국염색가공학회지
• /
• 제14권5호
• /
• pp.284-293
• /
• 2002

Nylon 6 and polyester taffeta fabrics are dyed in aqueous medium with vat dyes such as Indanthren Red FBB, Mikethren Blue ACE and Mikethren Blue HR varying the compositions of sodium hydrosulfite and NaOH. Also nylon UMF nonwoven and polyester UMF knitted fabrics are dyed with metal complex and disperse dyes as a reference, and the wash and rubbing fastnesses for these dyes are investigated. In vat dyeing of polyester and nylon taffeta, an optimum composition of sodium hydrosulfite/NaOH is existed at a range of 1∼2wt%/0.2wt%. A good build-up property for Mikethren Blue ACE on nylon 6 UMF nonwoven fabric is shown at high temperature. Vat dyeing of polyester with Mikethren Blue Ace shows a good color shade in a higher temperature, while dyeing with Mitsui Blue HR shows low temperatures. Vat dyes In dyeing of both nylon 6 UMF nonwoven and polyester UMF knitted fabrics have a better wash fastnesses compared with metal complex or disperse dyes.

• 공업화학
• /
• 제17권5호
• /
• pp.527-531
• /
• 2006

본 연구는 커패시터(capacitor) 등의 유전재료로서 응용이 가능한 고분자로 코팅된 무기입자 및 이를 이용하여 제조된 유전율이 높은 폴리이미드(polyimide; PI) 나노복합재에 관한 것이다. 무기입자로는 높은 유전상수를 가지는 barium titanate(BT)를 선정하였고, 이를 유기 고분자인 나일론 6으로 표면 코팅하여 매트릭스 고분자인 폴리이미드와의 친화력을 향상시켰다. FT-IR과 TEM을 통하여 5 nm 두께의 고분자 셀(shell)이 형성된 친유기화된 무기입자(BTN)를 확인하였으며, 나일론 6이 코팅된 BT의 내경과 외경의 비, 그리고 $\alpha$와의 관계를 나타낸 모식도를 통해 고분자 코팅 두께를 조절할 수 있음을 제안하였다. 제조된 BTN과의 복합화를 통하여 폴리아믹산 나노복합용액을 제조하였으며, 이를 탈수 고리화하여 열적 및 전기적 특성이 우수한 폴리이미드 나노복합필름을 제조하였다. SEM을 통하여 BTN이 매트릭스 고분자 내에 균일 분산상을 형성함을 확인하였으며, TGA와 전기적 측정을 통하여 BTN의 함량에 따른 폴리이미드 나노복합필름의 열안정성 지수, 적분 열분해 온도 및 유전율의 변화를 각각 조사하였다.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• 열처리공학회지
• /
• 제15권5호
• /
• pp.228-233
• /
• 2002

The characteristics of the induction heating process are analyzed for the joint of nylon and metal. The temperature of metal surface is measured using thermocouples. The relations of temperature and induction heating parameters are analyzed. Heat equation models are constructed and the temperature distribution is predicted using Fluent. The effects of heating parameters on the joint strength are evaluated. Finally, the optimal parameters of induction heating process are proposed as 16kW and 6 seconds.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.67-73
• /
• 1994

The adsorption behaviors of acid dye and disperse dye on silk and nylon fabrics were examined, in one bath dyeing system on silk/nylon blend fabric with disperse dyes and acid dyes. In the dyeing of nylon fabric with C. I. Disperse Red 19 (Red 19) and C. I. Disperse Red 60 (Red 60), dye uptake of Red 19 was higher than that of Red 60. When silk/nylon blend fabric was dyed with Red 19 and Red 0, the dye uptake on nylon was influenced by the ffinity of the dye to the silk fabric. In the dyeing of silk/nylon with C. I. Acid Blue 80 and C. I. Acid Yellow 121, solid shade could not be obtained with the conventional method but could be obtained with the dyeing resist agent for nylon. There was not any relationship between K/S value and Munsell value, but Munsell value tended to change with the K/S value.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.63-68
• /
• 2006

In synthetic/spandex blends fibers, contents of the synthetic fiber by percentage is higher than those of spandex. Thus, the dyeing process of the blends fiber is mainly focused on the synthetic fiber, but not the spandex. In this study, we used several series of vat dyes for dyeing the nylon/spandex blend fabrics and their dyeing properties(fk value) were investigated at various reduction agents, temperatures, pH which have the potential for deep shade dyeing effects. The formamidinesulfinic acid were found to be effective to increase the fk values of the blend fiber compared to sodium hydrosulfite and Rongalit C. Higher temperature($100^{\circ}C$) and lower pH(pH 4) were observed as suitable conditions for maximum fk values.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.43-47
• /
• 1989

The microstructural changes of nylon 6 UDY, POY and FDY were compared after free-annealing through crystallinity, birefringence, and melting behavior analyses. Free-annealing was done at various temperatures $(120^{\circ}C\;,140^{\circ}C,\;160^{\circ}C,\;180^{\circ}C,\;200^{\circ}C)$ and times (15 min., 30 min., 60 min.) using vaccum oven. Crystallinity was measured by the density gradient column technique and birefringence was measured using a Nikon polarizing microscope with a quartz wedge and Senarmont compensator. Melting behavior was investigated on the basis of DSC melting corves. Crystallinites of specimens increased as the treatment temperature and time increased. Birefringence of UDY increased after annealing and increased as the treatment temperature increased. On the other hand, those of POY and FDY decreased after annealing. Especially, the changes of crystallinity and birefringence of treated POY were particularly lower than those of treated UDY and FDY. Melting peaks of untreated UDY, POY and FDY were different in the position and the shape, but little change was seen in melting peaks in spite of increasing the annealing temperature and time. UDY and FDY showed single melting peaks in all the specimens. But POY showed double melting peaks, which means the coexistences of crystals with different thermal properties.