• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.59-66
• /
• 2006

To understand the role of helical geometry on the regression rate enhancement, two competing underlying mechanisms such as turbulence enhancement and swirling motion production were studied by numerical calculations. Experimental results showed that the enhancement of heat transfer rate has the very close relation to the increase in regression rate even though the percentage of increase in heat transfer rate is different from that in regression rate. This discrepancy is presumably due to the change of turbulent flow feature caused by so-called "blowing mass flux" from the fuel surface. In this regard, the results of RANS calculation show that the blowing velocity is responsible for the reduction of the swirl generation and the increase in the turbulent kinetic energy. And the dominancy of one of the mechanisms causes the increase in the regression rate. Meanwhile, the increase in turbulent kinetic energy due to the mixing of blowing flow and free stream flow does not contribute for the enhancement of the heat transfer rate to the surface because the blowing flow pushes boundary layer away from the solid surface.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.285-291
• /
• 2014

This paper is related to the improvement of efficiency for high performance centrifugal pumps by reducing leakage loss, which is achieved by applying the grooved seal as a non-contact seal to the pumps. Various combinations of grooved seal types, including the spiral and the parallel groove in the rotor and/or in the stator, were tested by the experiment. And the corresponding hydraulic performance and the magnitude of axial thrust were measured and calculated for ten cases. From the results, the type with the spiral groove(spiral angle : $0.98^{\circ}$) in both the rotor and the stator was found to be most effective. In this case, the head and the efficiency were improved from the original design by 2.1% and 2.3% respectively at design capacity($340m^3/h$), and the axial thrust was decreased by 10%.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.1 s.18
• /
• pp.14-22
• /
• 2003

In this paper the leakage prediction md rotordynamic analysis of an annular seal with a smooth rotor and spiral-grooved stator is performed. For the development of a theoretical model, the three-control-volume analysis of the circumferentially-grooved seal is expanded by considering pressure reduction due to the pumping effect of spiral groove and pressurized flow through the spiral groove. Validation on the present analysis is achieved by comparisons with available experimental data. For the leakage prediction the present analysis generally shows a reasonable agreement with experimental results. Rotordynamic coefficients for rotor speed with spiral angles show same trend, but the magnitudes of rotordynamic coefficients yield differences between analysis and experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.799-804
• /
• 2002

In this paper the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and spiral-grooved stator are performed. For developing a theoretical model, the three-control-volume analysis of the circumferentially-grooved seal is expanded by considering pressure reduction due to the pumping effect of spiral groove and pressure flow through the spiral groove. Results by the present analysis are compared with available experimental data. For leakage the analysis results generally show a reasonable agreement to the experimental results. For rotordynamic coefficients the analysis results show the same trend as the experimental results for rotor speed with spiral angles, but their magnitudes show somewhat large deviations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.498-501
• /
• 2000

Air dynamic bearings are inherently unstable in dynamic behavior due to the varying angle of a force produced and the nonlinear characteristics of stiffness. In this study, such dynamic behavior is obtained and compared with experimental results. A body axis coordinate system is employed to avoid the change of a moment of inertia. FDM is used to calculate the pressure distribution on the bearing surface and then the force acting on the rotor was calculated by integrating the pressure distribution. By integrating accelerations which are calculated from the equations of motion using the 4th order Runge-Kutta method, the pose of the bearing at each time step is obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.117-123
• /
• 2004

A brake disc with helical grooved vent in radial direction is proposed for the improvement of thermal dissipation. The heat transfer phenomenon is analyzed far both the proposed disc and the conventional one using finite element method. The thermal dissipation is considerably influenced by the geometrical differences of the brake discs. The results of the analysis show that the proposed brake disc with helical grooved vent has the improved performance to dissipate the thermal energy more effectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.728-733
• /
• 2006

본 논문은 홈 네트워크 환경에서 무선 센서 네트워크를 이용하여 홈 네트워크 서비스를 제공하는 서비스 모델을 제안한다. 제안된 서비스 모델은 댁내에 고정 센서 노드들을 배치하고 사용자에게 부착 가능한 센서 노드로 무선 센서 네트워크를 구성한다. 홈 서버에는 등록된 사용자 선호도 프로파일과 센서 노드들로부터 수집된 데이터를 데이터베이스로 구축한다. 이 데이터를 상황정보로 분석하여 사용자 개개인의 선호도에 따라 댁내 가전기기들을 자동 설정하고 자동 제어하는 서비스를 제공한다. 제안된 방식은 리눅스 환경에서 MySQL 데이터베이스가 내장된 홈 서버와 TinyOS가 탑재된 센서 노드들을 사용하여 구현하고 서비스를 테스트한다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.183-193
• /
• 2006

This paper suggests a service model which uses a wireless sensor network in home network environment. The sensor network consists of fixed sensor nodes and user identification nodes which is attached to each user. With the input information of the user preference profile and the collected data from the sensor nodes, the database is constructed as a context information and analyzed by a home server to provide a service that establishes and controls automatically home appliances according to each user's preference. The proposed service model is implemented and tested on a Linux server with MySQL database and sensor nodes on TinyOS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.104-111
• /
• 2006

A ventilated disc brake having spirally fluted surface has been proposed to improve the thermal judder by way of heat transfer enhancement. The local heat transfer coefficients were measured in the flow passage of disc brake. These measured local heat transfer data were utilized to do the finite element numerical analysis which predicts the maximum temperatures on the disc brake. The results show that the maximum temperatures on the disc surface with spirally fluted surface are approximately 26.6% lower than those without them.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.244-246
• /
• 2006

본 논문에서는 홈 네트워크 환경에서 댁내에 배치된 센서 노드들과 사용자에게 부착된 센서 노드로 구성된 무선 센서 네트워크를 이용하여 개인화 서비스를 제공하는 서비스 모델을 제안한다. 제안된 서비스 모델은 홈 서버에 등록된 사용자 프로파일과 센서 노드들로부터 수집된 상황정보를 이용하여 사용자 개인의 특성에 따라 댁내 가전기기들을 설정하고 연동 서비스를 제공한다. 제안된 방식은 TinyOS가 탐재된 Moteiv사의 tmote sky 모트들을 사용하여 구현 테스트한다.