• Composites Research
• /
• v.29 no.6
• /
• pp.336-341
• /
• 2016

This paper conducted the study on the electromagnetic and mechanical applicability of CNT-coated glass fiber for wind blades. Large-size wind blade has the serious pending problems to meet the target, such as interfering radar signals, increasing weights, and increasing repair costs. In this paper, we are suggesting the CNT-coated glass fiber in order to overcome these problems. First, the CNTs were strongly coated on the surfaces of glass fiber by suggested coating process, and the CNT-coated glass fiber/epoxy composites were fabricated by Va-RTM process. We designed and fabricated a radar absorbing structure using the CNT-coated glass fiber, which showed over 90% radar absorbing performance between 8.3 and 12.1 GHz frequency. In addition, we confirmed the improvement of mechanical properties on the strength and modulus of tensile, compressive, and in-plane shear.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.110-115
• /
• 2013

The electrochemical performance and microstructure of Al-Si, Al-Si/C was investigated as anode for lithium ion battery. The Al-Si nano composite with 5 : 1 at% ratio was prepared by arc-discharge nano powder process. However, some of problem is occurred, when Al nano composite was synthesized by this manufacturing. The oxidation film is generated around Al-Si particles for passivating processing in the manufacture. The oxidation film interrupts electrical chemistry reaction during lithium ion insertion/extraction for charge and discharge. Because of the existence the oxidation film, Al-Si first cycle capacity is very lower than other examples. Therefore, carbon synthsized by glucose ($C_6H_{12}O_6$) was conducted to remove the oxidation film covered on the composite. The results showed that the first discharge cycle capacity of Al-Si/C is improved to 113mAh/g comparing with Al-Si (18.6mAh/g). Furthermore, XRD data and TEM images indicate that $Al_4C_3$ crystalline exist in Al-Si/C composite. In addition the Si-Al anode material, in which silicon is more contained was tested by same method as above, it was investigated to check the anode capacity and morphology properties in accordance with changing content of silicon, Si-Al anode has much higher initial discharge capacity(about 500mAh/g) than anode materials based on Aluminum as well as the morphology properties is also very different with the anode based Aluminum.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.432-442
• /
• 2011

Anodized tubular $TiO_2$ electrodes (ATTEs) with three noticeably different lengths are prepared to determine their optimum length for the photo-driven activity in the reaction of Cr(VI) reduction and hydrogen evolution. The ATTEs with ethylene glycol have longer $TiO_2$ tubes (7-15.6 ${\mu}m$) than those with hydrfluoric acid (0.6-0.8 ${\mu}m$). These samples, which differ only in the length of the tubes, with a wall thickness of ca. 20 nm, consist mainly of an anatase crystalline phase after heat treatment at $650^{\circ}C$, since the anatase crystallites at the tube walls do not undergo transformation into rutile phase, due to the constraints imposed by the wall thickness. Among them, the medium size (ca. 8 ${\mu}m$) tubes provide the optimum conditions, irrespective of the light intensity, which is explained in terms of the correlation between the amount of photons and the adsorbed electron acceptors and their location. Photocatalytic Cr(VI) reduction leads to ca. 60% reduction of Cr(VI) even under 1 sun irradiation with the medium-sized anodized $TiO_2$ tubes, but only ca. 20% with the short- and long-sized tubes. For hydrogen evolution, tubes longer than 8 ${\mu}m$ do not exhibit better performance with any light intensity.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.178-186
• /
• 2004

The aim of this study was to investigate the skin-whitening effect of okyong-san and to develop new drug delivery carrier The extracts of okyong-san were found to have the whitening effect and Eudragit$\^$ⓡ/ L 100-55 (EUD) coated solid lipid nanoparticle (E-SLN) was prepared by solvent evaporation method and melt dispersion technique. As a result, E-SLN have a 144-170 nm of particle size, spherical shape, and 33-41% encapsulation efficiency, After release test in vitro, release profile of E-SLN depended on pH and temperature. Lastly, closed patch test and skin-whitening test was peformed clinically. In conclusion, test sample had non-stimulation and high % whiteness. The results suggest that okyong-san and E-SLN is useful as cosmeceuticals for whitening cosmetics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.637-646
• /
• 2016

This study is to investigate the influence of hydrogen attack and UNSM on fatigue behaviors of the Inconel 718 alloy. The decrease of the fatigue life between the untreated and the hydrogen attacked material is 10-20%. The fatigue lives of hydrogen attacked specimen decreased without a fatigue limit, similar to those of nonferrous materials. Due to hydrogen embrittlement, about 80% of the surface cracks were smaller than the average grain size of $13{\mu}m$. Many small surface cracks caused by the embrittling effect of hydrogen attack were initiated at the grain boundaries and surface scratches. Cracks were irregularly distributed, grew, and then coalesced through tearing, leading to a reduction of fatigue life. Results revealed that the fatigue lives of UNSM-treated specimens were longer than those of the untreated specimens.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.313-318
• /
• 2013

Magnetic abrasive polishing is an advanced deburring process for nonmagnetic materials and micropattern products that have non-machinability characteristics. Despite these advantages, there are some problems with using MAP for deburring. MAP has introduced geometric errors into microgrooves because of an over-cutting force caused by uncontrolled magnetic abrasives in the MAP tool. Thus, in this study, to solve this problem, an EP (electrolyte polishing)-MAP hybrid polishing process was developed for deburring microgrooves in an STS316 material. In addition, an evaluation of EP-MAP for the deburring of microgrooves was carried out by profiling the burrs. The results of the experiment showed geometric errors after the deburring process using MAP. However, in the case of EP-MAP, no geometric error was observed after the process because of the lower material removal rate in EP-MAP.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.3
• /
• pp.25-33
• /
• 2015

In this study, Fe₃O₄-ACCS-Ag nanoparticles (NPs) were successfully synthesized using silica extracted from corn cob ash. The synthesized Fe₃O₄-ACCS-Ag NPs were characterized using X-ray diffraction (XRD), scanning electron microscopyenergy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM) and fourier transform infrared spectroscopy (FTIR). In addition, the potential application of Fe₃O₄-ACCS-Ag NPs as an antibacterial material in water disinfection was investigated using Escherichia coli ATCC 8739 as model bacteria. The antibacterial activity of synthesized composite material showed 99.9% antibacterial effect within 20 min for the tested bacteria. From this experiment, the synthesized Fe₃O₄-ACCS-Ag nanocomposites also hold magnetic properties and could be easily recovered from the water solution for its reuse. The reused nanocomposites presented the decreasing antibacterial efficiencies with the reuse cycle but the composite used three times still killed 90% of bacteria in 20 min.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.462-462
• /
• 2011

그래핀은 탄소원자로 구성된 원자단위 두께의 매우 얇은 2차원의 나노재료로서 높은 투광도 뿐만 아니라 우수한 기계적, 전기적 특성을 지니며 구조적 화학적 으로도 매우 안정한 것으로 알려져 있다. 이러한 그래핀을 얻는 방법에는 물리·화학적 박리법, 탄화규소의 흑연화, 열화학기 상증착법(thermal chemical vapor deposition; TCVD)등 많은 방법들이 존재한다. 이중 TCVD방법이 대면적으로 두께균일도가 높은 그래핀을 얻는데 가장 적합한 방법으로 알려져 있다. 한편 그래핀은 우수한 특성들을 기반으로 센서나 메모리와 같은 기능성 소자로 응용이 가능할 뿐 아니라 투명고분자 기판으로 전사함으로서 유연성 투명전극을 제작 가능하여 기존의 인듐산화물(indium tin oxide; ITO) 투명전극을 대체하여 디스플레이, 터치스크린, 전·자기 차폐재 등의 다양한 분야로의 응용이 가능하다고 예측되고 있다. 본 연구에서는 TCVD법을 이용하여 대면적으로 두께균일도가 높은 그래핀을 합성하여 투명 고분자 기판(polyethylene terephthalate; PET) 위에 전사하여 투명전도막을 제작한 후, 압축변형률(compressive strain)의 변화에 따른 전기적 특성 변화를 측정하였다. 그래핀은 300 nm 두께의 니켈박막이 증착된 산화물 실리콘 기판위에 원료가스로 메탄(CH4)을 사용하여 합성하였다. 합성 결과 단층 그래핀의 면적은 약 80% 이상이었으며, 합성된 그래핀은 분석의 용이함 및 향후 다양한 응용을 위하여 식각공정을 통해 산화막 실리콘 기판과 PET기판으로 전사하였다. PET기판 위로 전사하여 제작한 그래핀 투명전도막의 strain 인가에 따른 전기적 특성을 관찰한 결과, 약 20%의 비교적 높은 strain하에서도 전기적특성이 크게 변화하지 않는 것을 확인하였다. 그래핀의 특성분석을 위해서는 광학현미경, 라만 분광기, 투과전자현미경, 자외 및 가시선 분광광도계, 4탐침측정기 등을 이용하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.162-168
• /
• 2017

Carbon nanotube(CNT) is one of the promising construction materials to produce concrete with high strength and durability by adding in the concrete mixtures from various researches. Also, its superior heat conductivity can be one of the options to develop self-heating concrete. In this research, the fundamental study was conducted to investigate mechanical properties and microstructures of cement pastes and mortars by strength tests and porosity measurement with several CNT additions, which were 0 wt%, 0.115 wt%, 0.23 wt% and 0.46 wt% of CNT-cement ratio. Compressive and flexural strength test were conducted at 3, 7 and 28 days, and pore characteristics were investigated by mercury intrusion porosimetry. SEM-EDS and Thermogravimetric analysis(TGA) were conducted to prove the hydration product types and CNT dispersion in the cement matrix. As a result, even though high amount of CNT additions were caused worse performance, mixtures with 0.115 wt% of CNTs developed the similar performance with plain mixture.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.183-191
• /
• 2005

Ionic liquids, composed of organic cations and either organic or inorganic anions remain liquid over a wide range of temperature. ionic liquids are a new group of solvents or extractants of great interest as a potential 'green solvent'. Ionic liquids are gaining wide recognition as novel solvents in many research fields, such as chemistry, chemical engineering, electrochemitry, etc. However, not much researches have been done related to biotechnology using ionic liquids, while a lot of researches have been performed in chemistry. The merits of ionic liquids in bioseparation technology are originated from some unique properties of ionic liquids, such as negligible vapor pressure, good thermal stability, controllable viscosity and miscibility with water and organic solvents. An appropriate selection of ionic liquid for bioprocesses requires basic knowledge on physicochemical properties of ionic liquids. This review gives a brief overview on the application of ionic liquids in biotechnology, including bioconversion and bioseparation.