• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.34-39
• /
• 2019

Current synthesis processes for titanium dioxide ($TiO_2$) nanoparticles require expensive precursors or templates as well as complex steps and long reaction times. In addition, these processes produce highly agglomerated nanoparticles. In this study, we demonstrate a simple and continuous approach to synthesize $TiO_2$ nanoparticles by a salt-assisted ultrasonic spray pyrolysis method. We also investigate the effect of salt content in a precursor solution on the morphology and size of synthesized products. The synthesized $TiO_2$ nanoparticles are systematically characterized by X-ray diffraction, transmission electron micrograph, and UV-Vis spectroscopy. These nanoparticles appear to have a single anatase phase and a uniform particle-size distribution with an average particle size of approximately 10 nm. By extrapolating the plots of the transformed Kubelka-Munk function versus the absorbed light energy, we determine that the energy band gap of the synthesized $TiO_2$ nanoparticles is 3.25 eV.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.633-639
• /
• 2018

In anion exchange membrane fuel cells, Pd nanoparticles are extensively studied as promising non-Pt catalysts due to their electronic structure similar to Pt. In this study, to fabricate Pd nanoparticles well dispersed on carbon support materials, we propose a synthetic strategy using mixed organic ligands with different chemical structures and functions. Simultaneously to control the Pd particle size and dispersion, a ligand mixture composed of oleylamine(OA) and trioctylphosphine(TOP) is utilized during thermal decomposition of Pd precursors. In the ligand mixture, OA serves mainly as a reducing agent rather than a stabilizer since TOP, which has a bulky structure, more strongly interacts with the Pd metal surface as a stabilizer compared to OA. The specific roles of OA and TOP in the Pd nanoparticle synthesis are studied according to the mixture composition, and the oxygen reduction reaction(ORR) activity and durability of highly-dispersed Pd nanocatalysts with different particles sizes are investigated. The results of this study confirm that the Pd nanocatalyst with large particles has high durability compared to the nanocatalyst with small Pd nanoparticles during the accelerated degradation tests although they initially indicated similar ORR performance.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.11-22
• /
• 2018

자력선별장비는 일반적으로 광산업 및 재활용 분야에서 사용되어 왔으며, 다양한 분야에서 폭넓게 활용되고 있다. 자력선별장비는 비철재료로부터 철 스크랩 분리를 위한 조립자용 선별장비와 3 mm 이하 미립 강자성체를 농축하기 위한 미립자용 선별장비로 구분된다. 또한 미립자용 선별장비는 저자력 선별장비와 고자력 선별장비로 세분된다. 저자력 선별장비는 강자성체나 높은 자화율의 상자성체를 분리하는데 사용되고, 고자력선별장비는 낮은 자화율의 상자성체를 분리하는데 사용된다. 저자력 및 고자력 선별장비 모두 습식과 건식으로 활용된다. 최근 0.7 Tesla미만 영역에서 활용되는 전자석 고구배자력선별장비는 1980년대 이후 상용화된 희토류 영구자석으로 제조된 자력선별장비로 점진적으로 대체되는 추세이며, 환경분야와 생물분야에서 합성자성물질과 관련된 나노기술의 확대는 향 후 자력선별기술의 발전에 긍정적으로 기여할 것으로 기대된다.

• 한국환경과학회지
• /
• 제27권11호
• /
• pp.967-974
• /
• 2018

In this study, we evaluated the photocatalytic oxidation efficiency of aromatic volatile hydrocarbons by using $WO_3$-doped $TiO_2$ nanotubes (WTNTs) under visible-light irradiation. One-dimensional WTNTs were synthesized by ultrasonic-assisted hydrothermal method and impregnation. XRD analysis revealed successful incorporation of $WO_3$ into $TiO_2$ nanotube (TNT) structures. UV-Vis spectra exhibited that the synthesized WTNT samples can be activated under visible light irradiation. FE-SEM and TEM images showed the one-dimensional structure of the prepared TNTs and WTNTs. The photocatalytic oxidation efficiencies of toluene, ethylbenzene, and o-xylene were higher using WTNT samples than undoped TNT. These results were explained based on the charge separation ability, adsorption capability, and light absorption of the sample photocatalysts. Among the different light sources, light-emitting-diodes (LEDs) are more highly energy-efficient than 8-W daylight used for the photocatalytic oxidation of toluene, ethylbenzene, and o-xylene, though the photocatalytic oxidation efficiency is higher for 8-W daylight.

• 멤브레인
• /
• 제29권5호
• /
• pp.252-262
• /
• 2019

서로 다른 술폰화 정도에 따라 sulfonated star branched poly(styrene-b-butadiene-b-styrene) triblock copolymer (SSBS)가 합성되었다. 술폰화된 butadiene block은 FT-IR spectroscopy로 확인할 수 있다. 술폰화 정도를 측정 비교하기 위해서 산-염기 적정을 통하여, ion exchange capacity (IEC)를 계산하였다. 술폰화된 SSEB 전해질막은 높은 water uptake와 proton conductivity를 보였다. 실온에서 25 mol% 술폰화된 SSBS는 0.114 S/cm라는 높은 값을 나타냈으며, 이는 Nafion과 비슷한 수치였다. 일정한 상대 습도에서 온도의 증가는 현저하게 높은 수소이온전도도를 나타냄을 알 수 있었다. 모든 술폰화된 막은 Nafion과 비교했을 때 낮은 methanol 투과도를 보여주었다. AFM을 이용하여 술폰화된 전해질막의 구조는 이른바 분리된 나노구조의 미세상과 ionic channel의 접속으로 이루어졌음을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제37권6호
• /
• pp.1597-1604
• /
• 2020

본 연구에서는 발린분자가 접목된 고차구조 폴리아미노산 자기조립체를 활용하여 피부성장인자의 피부활성에 관한 연구를 진행하였다. 친수성 폴리아미노산 유도체에 베타-시트를 형성할 수 있는 발린 분자를 접목하여, 접목도(degree of substitution)와 중합도(degree of polymerization)가 조절된 양친성 폴리아미노산을 합성하였다. 고차구조 폴리아미노산과 함께 자기조립 되었을 때 상피세포성장인자는 프로콜라겐 생합성이 20% 향상되었고 티로시나아제 활성 저해능은 6.5배 증가함을 확인하였다. 고차구조 폴리아미노산 자기조립체를 활용하면 다양한 단백질 성장인자의 구조 안정성을 확보하여 효과적인 피부개선이 가능한 기능성 화장품 물질뿐만 아니라 나아가 의약품으로도 사용 가능하리라 기대된다.

• 대한금속재료학회지
• /
• 제48권4호
• /
• pp.357-362
• /
• 2010

Ferromagnetic Mn-Al nanoparticles were prepared using a plasma arc discharge method. The influence of the process parameters on the vaporization rate, composition, particle size, and magnetic properties of the as-produced nanoparticles was investigated. The Mn content was found to be higher in the nanoparticles than in the corresponding mother materials, although the difference diminished with the reaction time. As the $H_2$ content in the reaction gas increased, both the vaporization rate and the particle size increased. With 30 at.% Mn, the average particle diameter was 35.2 nm under a pure Ar gas condition, whereas it was 95.4 nm at a Ar:$H_2$ ratio of 60:40. With the addition of a small amount of carbon, ${\varepsilon}$-phase nanoparticles were successfully synthesized. After a heat treatment in a vacuum for 30 min at $500^{\circ}C$, the nonmagnetic ${\varepsilon}$-phase was transformed into the ferromagnetic ${\tau}$-phase, and a very high coercivity of nearly 5.6 kOe was achieved.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.565-569
• /
• 2011

Nanopowders of MgO, $Al_2O_3$ and $SiO_2$ were made by high-energy ball milling. The fast sintering of nanostructured $Al_2O_3-MgSiO_3-SiO_2$ composites was investigated from mechanically activated powders of MgO, $Al_2O_3$ and $SiO_2$ by a pulsed-current activated sintering process. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties; in particular greater strength, hardness, excellent ductility and toughness. Highly dense nanostructured $Al_2O_3- MgSiO_3-SiO_2$ composites were produced with simultaneous application of 80 MPa and pulsed output current of 2800A within 2 minutes. The sintering behavior, grain size and mechanical properties of $Al_2O_3-MgSiO_3-SiO_2$ composites were investigated.

• 대한금속재료학회지
• /
• 제49권8호
• /
• pp.614-618
• /
• 2011

Nanopowders of MgO, $Al_2O_3$ and $SiO_2$ were made by high energy ball milling. The rapid sintering of nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites was investigated by a high-frequency induction heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition of grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. Highly dense nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites were produced with simultaneous application of 80MPa pressure and induced output current of total power capacity (15 kW) within 2min. The sintering behavior, gain size and mechanical properties of $MgAl_2O_4-Mg_2SiO_4$ composites were investigated.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.231-236
• /
• 2011

Nanopowder of $Fe_2O_3$, Al, Cr and Si was fabricated by high energy ball milling. A dense nanostuctured $A_2O_3$ and $6.06Fe_{0.33}Cr_{0.16}Al_{0.23}Si_{0.29}$ composite was simultaneously synthesized and consolidated using high frequency induction heated sintering method within 1 minute from mechanically activated powders of $Fe_2O_3$, Al, Cr and Si. The grain sizes of $Al_2O_3$ and $Fe_{0.33}Cr_{0.16}Al_{0.23}Si_{0.29}$ in composite are 80 and 18 nm, respectively.