• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.300-302
• /
• 2014

발전기 출력의 약 60%을 담당하는 저압터빈의 케이싱은 복수기와 연결되어 있으며 외부케이싱과 내부 케이싱으로 구성되어 있다. 저압터빈 케이싱은 사용연수의 증가에 다른 경년열화로 인하여 터빈 기초 지지대의 침하, 케이싱 볼트의 느슨해짐 등 외부의 여러 가지 환경변화에 의하여 고유진동수가 저하된다. 본고에서는 우리나라 화력발전소 저압터빈 케이싱의 고유진동수 변화에 의하여 터빈 운전 주파수와 일치하는 공진현상이 발생하고 발전설비 운전 신뢰성에 영향을 미치고 있는데 이에 대한 원인 분석과 최소한의 비용으로 공진현상을 저감하고 운전 신뢰성을 확보한 사례에 대하여 기술한다

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.513-517
• /
• 2014

In this paper, I summarize the case for the noise emission of domestic power plants and foreign power plants occurred recently. It is described to main content that is analyzing of the noise source and looking at the noise generated, if necessary to derive the solution. In addition, a case study is shown based on that noise levels can be changed by the differently surrounding environmental conditions during the measurement noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.1000-1003
• /
• 2014

The primary purpose of this study is to observe the dynamic behavior within a vehicle on chassis dynamometer throughout cleat impact testing with two different constraining setups (Tie-down strap and one point fixation). Throughout this empirical experiment, no outstanding dynamic behavior characteristics are observed between two setups and thus, the performance of the one point fixation device is validated. Neither the interior noise nor acceleration at driver seat rail and knuckle is heavily influenced by two different constraining methods. However, one point fixation is far more advantageous considering its shorter set up time and its capability of measuring traction force with its built in force sensor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1034-1039
• /
• 2006

Large-amplitude, combustion-induced oscillations are observed in most systems involving continuous flow, such as aeroengine afterburners, gas boilers and rocket motors. Strong furnace vibration is typically characterized by the presence of well developed standing waves in the furnace, generating high pressure pulsation and causing structural vibration of the furnace walls. 320MW NG boilers have been experienced high vibration frequently since reconstruction works. Excessive furnace vibration was encountered when a burner air rate is suddenly reduced during load zone changed from 270MW to 300MW. An investigation showed that the primary cause of the vibration was induced by combustion low air flow rate. This paper describes phenomenon examination on strong furnace vibration due to the change of boiler operating conditions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.452-456
• /
• 2006

The critical speeds and mode shapes are most important to determine the behaviors of rotor in designing rotating machinery. As the capacity and span of turbine-generator increases, the turbine-generator system is composed of many components such as bearings, pedestal, turbine and hood and so on. Also, it is getting flexible and has many critical speeds. Especially, as the characteristics of bearing-pedestal are very complicated, they affect the entire vibration characteristics of turbine-generator system. In this paper, it is observed how to determine the equivalent dynamic stiffness of bearing-pedestal by analytical and experimental method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.414-414
• /
• 2011

핵융합로는 고온의 고밀도 플라즈마에 노출되므로 고 열부하 및 플라즈마 이온에 의한 물성수치를 충분히 고려한 재질로 구축하여야 한다. 특히 핵융합의 연료인 중수소, 삼중수소와 관련하여 플라즈마 대면 부품, 블랑켓, 열 교환기 등의 구축재질에 대한 수소동위원소의 누설거동 데이터 확보는 삼중수소의 취급 및 안전성과 경제성 측면에서 매우 중요하다. 현재 국내의 삼중수소 누설거동과 관련된 실험장치 개발 및 데이터는 관련 연구가 진행되는 선진국에 비해 초보적인 수준이며, 핵융합 기술의 자력개발을 위해서도 수소동위원소 관련 누설거동 데이터의 확보는 매우 중요하다. 본 연구는 삼중수소 누설거동 해석을 위한 예비 실험으로, 수소를 사용하는 누설거동 실험장치를 설계 제작하여 기초실험을 수행하였다. 시편은 스테인레스 스틸(SS-316L)을 사용하였으며, 시편의 두께를 변화시켜가며 수소에 대한 activation energy, permeability, diffusivity, solubility를 구한 후 타 연구그룹의 실험결과와 비교 하였다.

• Journal of the Korean Society of Earth Science Education
• /
• v.7 no.2
• /
• pp.180-191
• /
• 2014

The purpose of this study was to determine the effects on STEAM education for intergrated science inquiry ability of high school students. The experimental and control group were 30 students, respectively. The STEAM program developed by a teacher study group was applied to the experimental group students for 6 months. The control group learned traditional methods. The results of this study showed that the intergrated science inquiry ability of experimental group students were increased positively(P<0.05). Also the abilities as hypothesis, defining variables, determining variables, operational definition and data interpretation improved affirmatively(P<0.05) except graphing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1133-1138
• /
• 2009

This study was conducted in order to know the internal application of the critical strain graph. To evaluate critical strain graph, we carried out an uniaxial compression test with some of internal rocks: sandstone, shale, weathered granite, and pink granitic. Based on the uniaxial compression test, we deduced relations among critical strain, failure strain, uniaxial compression strength and modulus of elasticity. As a result, the study has found out the rocks, which have been tested, can be possibly evaluated by critical strain graph.

• Bulletin of the Korea Photovoltaic Society
• /
• v.1 no.2
• /
• pp.15-27
• /
• 2015

현재 태양전지 시장의 80% 이상을 차지하는 결정질 실리콘 태양전지에서 전면전극(front-side metallization)은 태양전지의 효율과 제조단가에 크게 영향을 미치는 주요 인자이다. 태양전지의 발전단가를 낮추기 위해 결정질 실리콘 태양전지의 기술개발이 고효율화와 동시에 제조단가를 절감하는 방향으로 진행되는 추이에 따라 전면전극 제조기술에서도 소재 및 공정단가의 절감과 고성능 전극 형성을 위한 새로운 소재 및 공정 개발이 지속적으로 요구되고 있다. 본 논문에서는 현재 상용 결정질 실리콘 태양전지 제조에서 95% 이상으로 가장 널리 적용되고 있는 Ag 페이스트를 사용한 스크린 인쇄 전극을 중심으로 전면전극 제조기술의 현황 및 향후 전망에 대해 논하고자 한다.

• Journal of Korea Foundry Society
• /
• v.37 no.4
• /
• pp.108-114
• /
• 2017

In this study, we investigated the effect of the Si content on the secondary dendrite arm spacing (SDAS) of hypoeutectic Al-Si binary alloys in the range of 4~10 wt% Si. Cooling curves were measured during the solidification of the alloy cast in a step-wise mold. We compared two kinds of solidification time: the first is the total solidification time for both dendritic and eutectic growth, and the second is the solidification time for only dendritic growth. The proportional constant in the relationship between SDAS and cooling rate was estimated, as this constant represents the stability of the cast microstructure. The proportional constant decreased with the Si contents from 4 wt% to 8 wt%, and it remains relatively uniform with up to 10 wt% of Si.