• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.28-38
• /
• 2006

Since the radioactivity of U was discovered by Becquerel in 1896, a number of radiometric dating techniques based on radioactive decay have been developed with the help of precise and accurate instruments. Among them, radiocarbon dating was introduced as the most effective method in archeology in Korea. However, though the radiocarbon methods have contributed greatly to the development of archeology in Korea, it is limited to organics in a matrix of soil and sediment, including organic carbon, charcoal, bone and so on. If there are no organics in some paleolitic sites, other methods are required for dating. Therefore, we introduced OSL (Optically Stimulated Luminescence) dating method in this paper. The method is mainly based on quartz grains or other particles. The aim of this paper is to discuss about sampling method and the limitation of its application in archeology.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.349-356
• /
• 2003

A continuous monitoring of sedimentation rate and textural characteristics of surface sediments was carried out on the tidal flats in Kwangyang Bay, middle South Sea for two years on an every-two-monthly basis. This study shows that during the winter the tidal flats receive a thin surface layer of which texture becomes finer. In summer, the surface sediments were subject to rather abrupt erosion by occational typhoons and heavy rainfall resulting in a coarse-silt dominated texture. Due to nearly closed geomorphology of Kwangyang Bay, local waves created in the bay during winter are much subdued, in contrast to the rough wave climate and associated sedimentary cycle for open-type tidal flats in the Yellow Sea. In addition, unexpected artificial effects on the tidal-flat sedimentation by construction of a huge industrial complex along the shoreline of the bay are observed from a nearby tidal flat. Here, the sediments were consistently eroded without any sign of natural seasonal variations.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.103-113
• /
• 2019

The purpose of this study was to develop an e-textile using LEDs that can enhance visual and functional effects, and to identify their applicability to sportswear. By applying the design elements of fashion design concretely with LEDs, an e-textile design module is developed and that module is applied to the product, so LED application design can be proposed for use in a practical product. E-textiles have been divided into five categories, and their usefulness were verified by applying e-textiles to men's and women's sportswear. The product beign considered has a built-in tilt sensor, which illuminates the LEDs according to the user's movements, and allows the LEDs to be turned on or off in accordance to the user's preference. E-tatoo is a type of LED application that enhances the appearance by placing LEDs on a small area, emphasizing origin points, just like an actual tattoo. Designed with LEDs arranged in a straight line and various curved forms, e-strips can provide a function that matches the characteristics of each section of clothing or fashion item. E-wappen uses about 7-10 LEDs to give motifs a strong sense of visibility, thus adding to their vibrancy. E-panels and e-clothes were able to produce creative and high-value textures. It is also expected to be used for special purposes or bags as it is possible to produce high value-added textures that are creative and aesthetically beautiful. For instance, a progressive LED string on the straight line of female leggings can further emphasize rhythmic movements during exercise, and e-wappen also serves the purpose of nighttime protection. It is also believed that the application of dance or dance-related sportswear will make the movement of the performance more intense and lively.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.156-169
• /
• 2019

The objective of this study was to develop lightweight, stretchable, tight-fit smart sportswear using the conductive yarns into the garment and demonstrating its usefulness. Sportswears with the ability to control LEDs with respect to lighting of the surrounding were developed by applying embroidery with conductive yarns to 2 types of men's T-shirts and 2 types of women's leggings pants for outdoor activities and exercise purposes. LEDs were applied to the front and back of men's T-shirts and to the rear of the waist of women's leggings. Men's T-shirts were printed where the LEDs were to be applied, and inside, they were embroidered with conductive threads on the hot-melt fabric to be attached, and then connected with LED. Women's pants were embroidered on the elastic band, in the form of a sine wave that gives it ability to stretch, and finally the elastic band was hidden inside the waistband. The operation of the light sensor in the dark provided the ability to protect joggers from night drivers or cyclists. LEDs were activated when the wearer turns on the fashionable device on his/her shoulder by pressing it. It was able to reduce the risk of accidents by giving recognizability to vehicles, bicycles, and athletes approaching or passing by at night, and securing safe distance from vehicles, etc. Internal embroidery technology had the same flexible and lightweight functions as ordinary clothing products, making it possible to apply to tight-fit smart T-shirts or leggings pants designs.

• Science of Emotion and Sensibility
• /
• v.24 no.3
• /
• pp.81-90
• /
• 2021

EMSCT (Electrical Muscle Stimulation Conductive Textile) is an electrical muscle stimulation pad that can compensate for ease of use and comfort, which are disadvantages of conventional hydrogel pads used in electrical muscle stimulation (EMS). With the concentration with SWCNT (Single-Walled Carbon Nanotube) and the number of impregnation processes, EMSCT was tested by giving conductivity to five fabrics (radirons, neoprene, spandex cushions, poly100%, and vergamo). The padding process with SWCNT was performed, and the alternating current measurement indicated that the most similar alternating current with hydrogel was the Vergamo fabric of SWCNT:=2:1. Furthermore, the usability evaluation of convenience, usability, and psychological satisfaction results in increased usability of EMSCT compared with conventional hydrogel pads.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1154-1162
• /
• 2020

In this study, the soft textile actuator is produced for a smart wearable with the shape memory effects from linear shape memory alloys of Nickel and Titanium using the driving force through the fabrication process. The measurement model was designed to measure dynamic characteristics. The heating method, and memory shape of the linear shape memory alloy were set to measure the operating temperature. A shape memory alloy at 40.13℃, was used to heat the alloy with a power supply for the selective operation and rapid reaction speed. The required amount of current was obtained by calculating the amount of heat and (considering the prevention of overheating) set to 1.3 A. The fabrication process produced a soft textile actuator using a stitching technique for linear shape memory alloys at 0.5 mm intervals in the general fabric. The dynamic characteristics of linear shape memory alloys and actuators were measured and compared. For manufactured soft textile actuators, up to 0.8 N, twice the force of the single linear shape memory alloy, 0.38 N, and the response time was measured at 50 s.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.51-64
• /
• 2021

The purpose of this study was to develop smart bags that combining fashion-specific trends and smart information technologies such as light-emitting diodes(LED) and optic fibers by grafting marquage techniques that have recently become popular as part of eco-fashion. We applied e-textiles by designing leather tote bags that could show off LED luminescence. A total of two tote bags, a white-colored peacock design and a black-colored paisley design, divided the LED's light-emitting method into two types, incremental lighting and random light-emission to suit each design, and the locations of the optical fibers were also reversed depending upon the design. The production of circuits for the LEDs and optical fibers was based on the design, and a flexible conductive fabric was laser-cut instead of wire line and attached to the circuit-line location. A separate connector was underwent three-dimensional(3D)-modeling and was connected to high-luminosity LEDs and optic fiber bundles. The optical fiber logo part expressed a subtle image using a white-colored LED, which did not offset the LED's sharp luminous effects, suggesting that using LEDs with fiber optics allowed for the expression of each in harmony without being heterogeneous. Overall, the LEDs and fiber optic fabric were well-harmonized in the fashion bag using marquage techniques, and there was no sense of it being a mechanical device. Also, the circuit part was made of conductive fabric, which is an e-textile product that feels the same as a thin, flexible fabric. The study confirmed that the bag was developed as a smart wearable product that could be used in everyday life.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.531-542
• /
• 2022

As buildings become taller, the strength of structural materials must increase and the amount of rebar reinforcement also increases while the application of an appropriate rebar splice method in the construction process become one of the essential factors. In this research, the current status of quality check for rebar coupler is identified by an expert questionnaire and an appropriate quality check method is proposed through a quality test on specimens similar to actual on-site construction. In the test results, it was revealed that, among the quality check methods for rebar coupler joints, the coupler tightening method and face to face degree of between upper and lower rebar did not affect the strength the specimen. Therefore, it is considered to be an appropriate way to check the coupler quality check to check whether the threads are completely assembled during on-site construction through manufacture the number of threads of rebar and coupler with a margin beyond the calculated thread number.

• Journal of Fashion Business
• /
• v.26 no.4
• /
• pp.112-122
• /
• 2022

The purpose of this study is to investigate the effect of using socks combined with EMS on ankle pain reduction and ankle function improvement in home training participants. In this study, the conductive fabric was combined using socks that can properly compress the ankle. First, VAS was measured during EMS training after fatigue was induced and compared with fatigue during rest. It was confirmed that the level of VAS after EMS training was lower than after rest and fatigue. It was also confirmed that EMS training, which combines EMS with socks, was effective in reducing pain. The experimental action is a measurement action of WBLT and lying posture, and the situation before and after EMS training was compared by performing 30 minutes on the treadmill to cause delayed muscle pain during exercise. As a result of this study, it was found that pain reduction and ROM function were improved when electrical stimulation was performed using EMS socks. It was also confirmed that the application of electrical stimulation to EMS socks effected on ankle fatigue and function improvement. From the study results, it is expected that wearing socks equipped with EMS significantly reduces ankle injuries and improves functional recovery for home training participants.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.15-19
• /
• 2022

The radial distribution systems (RDS) commonly used around the world has the following disadvantages. First, when the DL is operated on a radial system, the line utilization rate is usually kept low. Second, if a fault occurs in the radial DL, a power outage of 3 to 5 minutes is occurring depending on the operator's proficiency and fault situation until the fault section is separated and the normal section is replaced. To solve this problem, Various methods have been proposed at domestic and foreign to solve this problem, and in Korea, research is underway on the advanced system of operating multiple linked DL always. A system that is electrically linked always, and that is built to enable high-speed communication during the protection coordination is named networked distribution system (NDS). Because the load shares the DL, the line utilization rate can be improved, and even if the line faults, the normal section does not need to be cut off, so the normal section does not experience a power outage. However, since it is impossible to predict in which direction the fault current will flow when a failure occurs in the NDS, a communication-based protection coordination is used, but there is no backup protection coordination method in case of communication failure. Therefore, in this paper, we propose a protective cooperation method to apply as a backup method when communication fails in NDS. The new method is to change TCC by location of CB using voltage drop in case of fault.