• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.4 no.1
• /
• pp.20-23
• /
• 2011

Penetrating injury and retained foreign substances in human body are the main causes of visiting to the emergency room. In hand, foreign substances are caused by trauma. The most common plant pieces, the glass fragments and metal fragments should occur in the order. Especially, it's hard to find fragments of plants and plastic materials because of their radiolucency. And although these fragments are removed, it's difficult to differentiated clearly whether residual foreign bodies are in human hand or not. This study reports the authors' experience in the treatment of a patient from whom he removed a residual tree thorn in the operating room. The thorn was found 4 weeks after the trauma by ultrasonography and then the patients' symptoms were improved.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.63-69
• /
• 2004

Hematite-coated sand was examined for the application of the PRB (permeable reactive barrier) to the arsenic-contaminated subsurface in the metal mining areas. The removal efficiency of As in a batch and a flow system was investigated through the adsorption isotherm, removal kinetics and column experiments. Hematite-coated sand followed a linear adsorption isotherm with high adsorption capacity at low level concentrations of As (＜1.0 mg/L). In the column experiments, high content of hematite-coated sand enhanced the removal efficiency, but the amount of the As removal decreased due to the higher affinity of As (V) than As (III) and reduced adsorption kinetics in the flow system. Therefore. the amount of hematite-coated sand, the adsorption affinity of As species and removal kinetics determined the removal efficiency of As in a flow system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.245-252
• /
• 2016

In this study, an alternative bend design is proposed to overcome the aging problem in piping bends. In this design, the foam pad is not included. Finite element analysis was performed based on the total pipe diameter. From this analysis, the shape of the Shear Control Ring (SCR) was determined. Temperature, stress, and other data of the proposed reinforced pipe were acquired and analyzed after the test was performed. The value of the thermal stress for the reinforced steel pipe satisfied the required standard without the foam pad based on the manufacturing of the reinforced fitting and construction site of the test. The reinforcement provided a shear strength level for the foam pad that resulted in maximum shear stress less than stress based on the original foam pad applied at the pipe bend. Additionally, an increasing factor of safety effect for the reinforced fitting application was discovered.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.397-401
• /
• 2005

Acid mine drainage and waste of abandoned mine area have caused serious water pollution and destruction of an ecosystem because of exposing to environment without an appropriate treatment. Gwang-yang mine area also has a serious problem in the nearby residential area and waterway ecosystems. The objectives of this research are to develop the most suitable remediation system for acid mine drainage by using waste materials, and to diagnose stream environments impacted by acid mine drainage through the new ecological health assessment methodology, and thus ultimately providing a restoring methodology to mining regions. In the water system health assessment, the result of ESHI model, RBP and Karr suggested by US EPA is revised by ecological features of our country, come to ESHI score 13; 'Very poor' at some points. Together with pH value and heavy metal concentration, it's the aggravation of ecological health index caused by chemical disturbances. In the acid mine drainage treatment, we apply marine shells and slags to this system. Slags had the best removal ability for heavy metals, but pH value was more than 10 exceeding the standard for drain water. In case of marine shells, pH of treated water maintained 7 to 8, and concentrations of Fe and Zn decreased significantly after treatment.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.467-473
• /
• 2013

This research presents a preparation method of dental components by metal injection molding process (MIM process) using titanium scrap. About $20{\mu}m$ sized spherical titanium powders for MIM process were successfully prepared by a novel dehydrogenation and spheroidization method using in-situ radio frequency thermal plasma treatment. The effects of MIM process parameters on the mechanical and biological properties of dental components were investigated and the optimum condition was obtained. After sintering at $1250^{\circ}C$ for 1 hour in vacuum, the hardness and the tensile strength of MIMed titanium components were 289 Hv and 584 MPa, respectively. Prepared titanium dental components were not cytotoxic and they showed a good cell proliferation property.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2009

Purpose: The perforator flaps have established their role in the reconstruction of various soft tissue defects. For the last five years, we have extensively used anterolateral thigh (ALT) flap for the reconstruction of the complex tissue defects of the hand and upper extremity and report the clinical results and our experiences with the versatile applications of this flap. Materials and Methods: From March 2003 through May 2008, 119 free ALT perforator flaps were transferred for reconstruction of the complex tissue defects of the elbow, forearm, wrist and hand after crushing or degloving injuries as well as severe scar contractures. There were 95 females and 24 males. The mean age of the patients was 37 years and mean size of the flap was 170 $cm^2$. In 20 cases, the flap was vascularized by septocutaneous and in 99 cases by musculocutaneous perforators. Intra-muscular dissection length averaged 3.4 cm. The total length of pedicle averaged 8.4 cm and the average arterial diameter was 0.84 mm. End-to-end arterial anastomosis was performed in 103 cases and end-to-side in 16 cases. Results: Flap survival rate was 98.3%(117/119) and there were 6 cases of partial necrosis. Donor site was closed primarily in 41 cases and skin grafts were applied in 78 cases. Conclusion: The reliability and versatility of ALT flap makes it one of the foremost choices for the reconstruction of complex tissue defects of the upper extremity.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.545-556
• /
• 2003

Detailed interdisciplinary investigations demonstrate that the Yeongsan River estuarine-filled sediments clearly record important paleoenvironmental changes during the Last Glacial and Holocene. The sediments from 18.9 m(20.5∼l.6m in depth) long core MW-1 are differentiated by changes in sedimentary textures and palynomorph assemblages. Chronology was provided by AMS$^{14}$C dating and regional pollen correlation. Three paleoenvironrnental phases are recognized: (1) The Last Glacial deposits consist mainly of fluvial sediments and paleosols, experienced deposition alternating with pedogenesis. The appearance of the paleosols suggests that the paleoclimate might be cold and humid. (2) The early and middle Holocene phase started abruptly in response to the rapid global climatic warming. and is characterized by abundant marine palynomorphs. (3) The late Holocene is marked by more cool conditions. The paleoenvironmental changes recorded in the sediments coincide not only with local but also with broad-scale, probably global climate changes.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1979.05a
• /
• pp.9.3-9
• /
• 1979

Foreign bodies in air and food passages are not uncommon problems in the otolaryngological fields and its etiological factors are closely related to the social environment and mode of life. It may complicate of esophageal perforation, periesphagitis, periesophageal abscess, mediastinitis, pneumothorax, pyothorax and lung abscess which may lead to the problems of life and death. The majority of esophageal foreign bodies which lodge in the esophagus can be removed endoscopically, but the following types of foreign bodies may require removal by the external route: 1. an impacted foreign body, 2. a foreign body producing periesophagitis after unsuccessful attempts at removal through the esophagoscope, and 3. a periesophageal abscess with a foreign body lodging in the abscess itself. Many interesting cases and statistical analysis of esophageal foreign bodies were reported by many authors, but only a few complicated cases were reported. Recently, we experienced 2 cases of esophageal foreign bodies which penetrate the cervical and thoracic esophageal wall and formed periesophageal abscess in 12 and 40 years-old males who swallowed of wire accidentally. The foreign bodies are successfully removed by the external routes through the lateral neck and chest. The postoperative courses were uneventful.

• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.11-29
• /
• 2006

A bedrock river is a channel in which bedrock is exposed along the channel bed or walls for at least approximately half of its length. In some case, a continuous alluvial veneer may be present, but this is completely mobilized during floods. From the point of long term landscape evolution during the Quaternary, the bedrock channel determines local base level and the lowering rate of bedrock channels controls the rate of erosion and transport processes and forms on the adjacent hillslopes. In this review, various erosional processes in bedrock river channels are classified and discussed. Especially, theoretical and numerical models on channel bed abrasion with bed load sediment particles are introduced and discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.158-165
• /
• 2004

The DC motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motor.