• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.173-178
• /
• 2007

Children may respond differently to the caffeine from adults because they have different physiologic makeup and are functionally immature in terms of hepatic and renal function; this leads to the slower clearance of caffeine in early life. Therefore, children are often assumed to be more susceptible to caffeine effects. Alarge number of food supplements may interfere with these processes, and therefore caffeine exposure may have more serious consequences for children than for adults, irrespective of sensitivity. However, there has never been a national dietary survey on caffeine intakes in children. The purpose of our study was to identify caffeine intakes and beverage sources of caffeine in a representative sample of children in Busan, Korea. Caffeine intakes were based only on beverages included in the Continuing Surveys of Food Intakes by individuals. The caffeine content of the beverages ranged from 2.8 to 65.2mg/100ml for cola, soft drinks, and teas. Caffeine was not completely absent from caffeine-free colas, juice, and milk. In this study, cola-type beverages were an important dietary source of caffeine in the children. Daily caffeine intake for children was estimated to range from 12.5 to 250 mg/day. In general, the acceptable daily intake (ADI) of caffeine should cover the entire population including children. Therefore, special considerations should be needed regarding the consumption of soft drinks containing caffeine to children below the 12 years of age.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.52-57
• /
• 2006

This research was carried out to determine the effect of controlling nitrogen application on tiller development, yield, and quality of rice under scanty or excess seedling stands in direct-seeded rice on flooded soil surface. Seedling stand was set to 3 levels: scanty $(60/m^2)$, optimum $(120/m^2)$, and excess $(200/m^2)$. In the scanty plot, additional 4 kg/10a nitrogen was applied at the 3rd leaf stage to promote tiller development. On the other hand, applying 3.3 kg/10a nitrogen at 5th leaf stage in the excess plot was omitted to suppress tillering. Maximum numbers of tillers per plant were 15.2 and 8.6 in scanty and excess plots, respectively, as compared with 9.8 in optimum plot. Productive tiller rate decreased with the increase in number of seedling stands. Regardless of seedling density, the first tiller developed on the 3rd node of rice stem from the bottom. The primary tillers developed at 3, 4, 5, 6, 7 nodes in scanty plot, 3, 4, 5 nodes in optimum plot, and 3, 4 nodes in excess plot. The secondary tillers developed only in some portion of plants in scanty and optimum plots. The order of tiller emergence was negatively correlated to stem length, panicle length, non-productive tiller number, grain number per panicle, and fertility in scanty plot, and to perfect grain ratio in excess plot. In the optimum plot, however, the order of tiller emergence was not correlated to any of the mentioned characteristics. The perfect grain ratio of scanty plot was the highest because green-kerneled rice was a very small portion in the primary tillers as compared with those of optimum and excess plots. Yield indexes of scanty and excess plots were 99%, and 97%, respectively, of the yield (494 kg/10a) in optimum plot. In conclusion, when seedling stands are not at optimum level, rice yield and quality similar to optimum planting density level can be obtained by means of controlling nitrogen application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.384-389
• /
• 2009

Germination characteristics of Chinese milk vetch(CMV) seeds produced from Hanam Province, China and Milyang, Korea were investigated to give basic information on the stability of seedling establishment in the CMV cultivation. The germination percentage of the imported CMV seed from China varied according to importation year and seed collection site ranging from 79~95%. The germination of black colored seed coat was lower than the light green colored ones and germination by seed weight was not significantly different. Although the seed germination was lower under dark than in the presence of light, it was not significantly different. The germination of the imported CMV seed slightly declined to only less than 6% after one-year of storage under natural environment conditions but it significantly decreased after two years. However, when the seed was stored at the $5^{\circ}C$, the seed germination was the same as after two years of storage. On the other hand, fresh CMV seed produced in Milyang, Korea had only 8% germination due to seed coat dormancy but the germination increased to 73~85% after breaking seed dormancy after a year of storage. The high germination percentage of 72~82% was still maintained even after 27 months of seed storage unlike the CMV seed produced from China. These results indicate that CMV seeds do not require light for germination and the seed from China should be used within one-year after importation while the seeds produced from Korea can be used even after two years from harvest for stable CMV seedling establishment in the CMV-rice cropping system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.351-356
• /
• 2009

Growth, milled rice yield and edible quality of rice in naturally reseeded Chinese milk vetch(CMV)-rice cropping system was compared with those in rice mono cropping on silty loam soil in Milyang from 2006-2008. Practicing natural reseeding technology recorded high CMV reseeding stand ranging from 565-805 plants $m^{-2}$ and resulting in the production of 13.0-17.0 kg N/10a from the CMV plant biomass which is greater than the recommendation rate of 9 kgN/10a. The plant height of rice plant grown in natural reseeding field is shorter at tillering stage but it was similar to the rice mono cropping at later stage. Dry matter production had similar trend to plant height. On the other hand, the leaf color in naturally reseeded CMV-rice cropping system was similar to the rice mono cropping up to panicle heading stage but it was high at mature stage, indicating that the nitrogen was provided by the CMV decomposition until later stage of rice. The yield components such as culm number $m^{-2}$ was greater and 1,000-brown rice weight was heavier than those of rice mono cropping but the ripened grain ratio was lower in naturally reseeded CMV-rice cropping system. Milled rice yield of naturally reseeded CMV-rice cropping system was similar to that of rice mono cropping. However, head rice percentage of milled rice was lower due to low ripened grain ratio. This result indicates that natural CMV reseeding technology can completely replace chemical fertilizer in CMV-rice cropping system.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.243-251
• /
• 2020

In this study, we investigated pesticide residues in 207 agricultural products distributed by direct trade in the northern area of Gyeonggi Province. A total of 94 general agricultural products and 113 eco-friendly agricultural products collected from local grocers and cooperative stores were analyzed by multiresidue method for 263 pesticides using GC (gas chromatography)/ECD (electron capture detector), GC/NPD (nitrogen phosphorus detector), GC-MS/MS (tandem mass spectrometry), LC (liquid chromatography)/PDA (photodiode array detector), LC/FLD (fluorescence detector), LC-MS/MS. All samples showing pesticide residues were general agricultural products collected from local food stores. The pesticide residue levels of 14 samples (6.8%) were below the maximum residue limits (MRLs) and one of them (0.5%) exceeded the MRLs. Sixteen pesticides were detected from samples of the following produce items: spinach, young cabbage, perilla leaves, mallow, cucumber, chives and water dropwort. The safety of the detected pesticides was assessed by monitoring the daily intake estimate (EDI) and the daily intake allowance (ADI) based on the amount of pesticides detected. The ADI percentage range (the ratio of EDI to ADI) was 0.0134-61.6259% and there was no health risk connected with consuming agricultural products in which pesticide residues were detected.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.373-379
• /
• 2002

This paper was the design of aerosol generator for inhalation toxicology study of lead and evaluation with real time monitoring, and applied several engineering methodology to classical aerosol generator to cope with it's disadvantages. According to the testing conditions, source temperature 50℃ and inlet-duct band heater temperature 150℃, aerosol generation results for sodium chloride and lead acetate were as followings: CPM(Count Per Minute) for Sodium chloride that used for the testing material in aerosol generation and inhalation system was decreased in the 2nd and the 3rd hour's serial trials, but CVs(coefficient of variation) were maintained within 10%. CPMs for 5 and 2.5 gram of lead acetate that used for aerosol generation and inhalation exposure of lead showed similar results because of the sedimentation of lead acetate on piezoelectric crystal with time. For that reason, heating and mixing of nebulizing solution will be needed to generate lead aerosol with stable profile and maximum generation efficiency. Fluctuations of 10 and 5 gram lead acetate were low but 2.5gram was high. However, CVs for 10, 5, and 2.5gram lead acetate were within 10%. Considering the theoretical efficiencies for sodium chloride and lead acetate, 5gram sodium chloride and 2.5gram lead acetate were appropriate choice. Aerosol generation characteristics for two materials with 1 hour interval were different with respect to the fluctuation of CPM and the decrease to 10gram in it's material. For that reason, sodium chloride can not be used to estimate the aerosol generation and it's related parts for lead acetate. According to the testing conditions, source temperature 20, 50, 70℃, and inlet-duct band heater temperature 20, 50, 100, 150, 200℃, aerosol generation results for sodium chloride and lead acetate were as followings: Excluding inlet-duct band temperature 200℃, maximum CPM for sodium chloride was manifested in source temperature 70℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing. Maximum CPMs for 10, 5, and 2.5gram sodium chloride were from source temperature 70℃ and inlet-duct band temperature 20℃. Excluding inlet-duct band temperature 50, 200℃, maximum CPMs for lead acetate were indicated in source temperature 50℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing for lead inhalation study. Source and inlet-duct band temperatures for 10, 5, 2.5gram lead acetate were 50 and 100℃, 50 and 100℃, 50 and 150℃, respectively. In conclusion, considering above 2 paragraphs of results for aerosol generation, 5gram efficiencies for sodium chloride, lead acetate were higher than 2.5gram's. If inlet-duct band temperature was same, aerosol generation was increased with increase of source temperature. To get maximum aerosol generation will be the conditions that set the appropriate inlet-duel band temperature for each materials and increase the source temperature.

• Pediatric Infection and Vaccine
• /
• v.21 no.3
• /
• pp.181-190
• /
• 2014

Purpose: This study was performed to investigate the epidemiological trend of rotavirus acute gastroenteritis (RV-AGE) in children. Methods: A retrospective review was performed in patients (1 month to 18 years of age) with acute gastroenteritis at KEPCO Medical Center from September 2004 to August 2013. Comparative analyses were performed based on periods: pre-vaccine (2004-2006) and post-vaccine (2008-2012) in all patients; 2004-2006 (period A), 2007-2009 (period B) and 2010-2012 (period C) in patients under 5 years of age. Results: Proportion of RV-AGE decreased from 25.0% (337/1,346) in pre-vaccine period to 20.8% (459/2,210) in post-vaccine period (rate ratio (RR), 0.83 [95% CI, 0.73-0.93]; P=0.0029). The median age of patients with RV-AGE in post-vaccine period (2.6 years) was significantly (P<0.0001) higher than that in pre-vaccine period (1.6 years). In patients hospitalized with AGE, proportion of RV-AGE was significantly reduced in patients 6 to 23 months old (RR, 0.62 [95% CI, 0.51-0.75]; P<0.0001). Significant decline in proportion of RV-AGE was observed in patients under 5 years of age: period A, 26.9% (308/1,144); period B, 22.7% (295/1,299); period C, 20.6% (186/902) (P =0.0007). After the introduction of rotavirus vaccine, a significant decreasing trend of RV-AGE proportion was observed in patients 6 to 11 months old (P =0.0018) and 12 to 23 months old (P =0.0152). Conclusion: Decrease in RV-AGE proportion and increase in age of patients with RV-AGE were observed after the introduction of rotavirus vaccine in this single center study. Continued and systematic surveillance is needed to assess the impact of rotavirus vaccine.

• Journal of Veterinary Clinics
• /
• v.23 no.3
• /
• pp.230-235
• /
• 2006

This study was performed in rats to find the minimum dose of melatonin that can effectively prevent the formation of postoperative intraperitoneal adhesions. Forty-two Sprague Dawley male rats were divided into six groups consisting of 7 rats, respectively. After celiotomy, five abrasions of $0.5{\times}1cm$ area were made on the antimesenteric serosal surface of the colon with a scalpel blade. The abdominal cavity was filled with 1 ml of solution containing 1 mg/kg(Mel 1), 3 mg/kg(Mel 3), 10 mg/kg(Mel 10), 30 mg/kg(Mel 30) and 5% ethanol solution(sham) through the catheter, using a sterile syringe before abdominal closure. Control group was given no adjuvant. The locations and values of adhesion were assessed through the second operation on the 14th day after the first operation. The adhesions were located on serosa to mesentery(54 of 210, 25.7%), serosa to serosa(44 of 210, 21%), serosa to omentum (12 of 210, 5.7%) and serosa to parietal peritoneum(0 of 210, 0%). The incidences of adhesion in Control, Sham, Mel 1, Mel 3, Mel 10 and Mel 30 were 68.6%, 91.4%, 57.1%, 60.1%, 17.1% and 20%, respectively. The values of adhesion separation in Mel 10 and Mel 30 group were lower than those in other groups. However, there was no significant(p<0.05) between Mel 10 and Mel 30 group. This study showed that 10 mg/kg of melatonin were effective in reducing the intraperitoneal adhesion.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.334-350
• /
• 2003

The purpose of this descriptive study was to evaluate the clinical validity of QSCCII (Questionnaire for the Sasang Constitution Classification), whose high accuracy as a constitutional diagnostic tool has been recognized by medical professionals. The subjects of this study were 568 clients from an A university hospital in Suwon. Of the subjects, 259 were health center visitors and 292 were ambulatory clinic visitors. Data were collected using self-reported questionnaire and were analyzed by $X^2$-test and one-way ANOVA. The results of this study as follows: 1. In 4 types of constitution, Soeumin type was found in 41.5% of the subjects. Taeumin type in 39.2%.,and Soyangin type in 19.2%, respectively. There was no Tayangin type found in this study. There were no significant differences on types of constitution by demographic characteristics such as age, sex, marital status, education, religion, and economic status. 2. As for 15 item-selective questionnaire, there were statistically significant differences on the response rate of the 12 items, except items such as A4, A11 and A14, by the types of constitution. When the subjects' own criteria on their constitution were compared to the given constitutional criteria on each item, 4 items such as A6, A11, A13 and A14 were advisable to be excluded from the questionnaire or to be reunited to the other criteria. In the meanwhile, 3 items such as A7, A18 and A15 were desirable to be re-categorized to the other constitutional types and reconstructed to the QSCC II questionnaire. 3. In terms of 106 true-false questionnaire, there were statistically significant differences on the response rate of 46 items by the types of constitution. The 46 items include 15 items (32.6%) of the domain of 'handling something/strength and weakness', 4 items (8.7%) of the domain of 'interpersonal relationship', 9 items (19.6%) of the domain of 'state of mind at ordinary times', 2 items (4.3%) of the domain of 'distinctive emotional characteristics' area, 11 items (23.9%) of the domain of 'specific behavioral trait' and 5 items (10.9%) of the domain of 'physical characteristics'. Therefore, the areas of 'handling something/strength and weakness' and' specific behavioral trait' mainly contributed to the classification of constitutional type. 4. When the 106 true-false items were simplified to the 46 items, statistically significant differences were found on the rate of items allocated to the 3 types of constitution. The rate of selection assigned to the 3 constitutional types of the simplified 46-item questionnaire was higher than that of the original 106-item questionnaire. Conclusions; It was concluded that the rate of selection of each lay person about his own constitutional type would be still higher even though the simplified items of QSCC II questionnaire were applied. If more replicated studies are conducted on the diverse population using the simplifying QSCC II questionnaire in the future, a more simplified standardized Sasang Constitution Questionnaire that is available to the public rather than to medical staffs in the clinical settings could be developed. Moreover, the simplified scale will help nurses deliver more efficient nursing care by providing a more rapid way of health assessment.