• 한국재료학회지
• /
• 제14권1호
• /
• pp.19-27
• /
• 2004

Metallurgical and mechanical experiments were performed to explain unexpected surface cracks encountered in fabricating ground rolled-billet of Fe-Cr-Al alloys at room temperature. The toughness of these alloys containing between 220 and 236 ppm (C+N) has been assessed using notched-bar impact tests. According to our results, with a larger grain size, a higher interstitial content of (C+N) or a smaller size of precipitates, ductile to brittle temperature(DBTT) increased and absorbed energy decreased at room temperature. These results suggest that the surface cracks at room temperature stem from a poor resistance to brittle fracture, due to dislocation movement by the finely dispersed carbides within grains under the condition of higher (C+N) content.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.225-236
• /
• 2005

The primary goal of the study is to provide a newly refined data model, an information exchange foundation of modeling operation for rapid prototyping, as one among non-milling STEP-NC modules. The previous data model has been first modified and refined by reflecting specific user requirements. Second, subsidiary information such as fabrication history as well as traditional process information has been introduced into the newly refined model in order to consolidate the model functionality. In short, the main contribution of the study is to provide a foundation where a newly refined data model is utilized easily and conveniently for practical rapid prototyping fabrication within the newly constructed STEP-NC environment.

• 한국재료학회지
• /
• 제5권4호
• /
• pp.405-411
• /
• 1995

급냉응고된 Al-3.51wt%Li-0.34wt%Zr 합금의 시효거동을 시차주사열량계(DSC)에 의한 열분석 방법으로 조사하였다. DSC에 의한 비열측정 결과 $\delta$’의 석출에 의한 발열반응과 $\delta$, $\beta$ 및 복합석출상의 석출에 의한 발열반응을 확인하였으며 $\delta$’ 및 $\delta$의 재고용에 의한 2개의 흡열반응을 확인하였다. 7$0^{\circ}C$ 저온시효시 $\delta$’의 석출에 의한 발열반응 이전에 흡열반응이 나타났으며 이것은 $\delta$’ 석출 이전에 $\delta$’ 전구생성물이 형성되었음을 의미한다. DSC 곡선상에 나타난 발열과 흡열곡선을 해석하여 얻은 $\delta$’상 석출과 재고용의 활성화에너지값은 각각 83KJ/mol과 98KJ/mol로서 Al-Li 2원계 및 Al-Li-Mg에 비해 높은 값을 나타내엇으며, 시효에 의한 강화가 일어나 DSC에 의한 비열변화 조사결과 나타난 $\delta$’상 석출 완료 시효조건점 (21$0^{\circ}C$, 1시간)에서 최고경도값(Hv 160)을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1660-1661
• /
• 2011

본 논문에서는 7중 대역 (GSM850, GSM900, DCS1800, PCS1900, UMTS850, UMTS1900, UMTS2100) 을 지원하는 LPF 내장형 LTCC 프런트 엔드 모듈 (FEM) 을 설계, 제작 및 측정하였다. 제작된 FEM은 효과적인 고조파 제거를 위해 수동소자를 LTCC 기판에 내장하여 저역 통과 필터(LPF)를 구현하였다. 본 논문에서 제안하는 FEM은 송수신 신호를 선택하기 위한 flip-chip 형태의 CMOS RF SP9T switch, Rx 신호의 수신을 위한 dual type의 SAW filter, 매칭 및 ESD 보호 회로를 위한 0603 크기의 칩소자가 부품 외부에 실장되어 구현된다. 전체 크기는 $4.5{\times}3.2{\times}1.2\;mm^3$의 초소형으로 내부 GND 2개 층을 포함하여 총 16층으로 구성된다. 측정결과는 송신단과 수신단의 삽입손실이 각각 1.7 dB, 3.6 dB 이하의 우수한 특성을 보였다.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.388-394
• /
• 2004

Seaweed waste(SWW) was used to improve the liner effect in recycling of dredged soil as the landfill liner. It was found that the compressive strength became somewhat lower when SWW was added than that was when Ordinary Port-land Cement(OPC) only was added. The permeability coefficient, however, became lower in this case which showed the lowest permeability coefficient when the addition of SWW was one percent. Hence, to comply with the regulations for the compression strength and permeability coefficient of landfill liner, the addition of OPC should be over eight percent and that of seaweed waste one percent. The results of leaching test showed that the solidified material was not against the laws of waste control, so it is possible to use as the landfill liner and to expect sufficient economic effects because wastes such as dredged soil and seaweed can be recycled.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.81-85
• /
• 2001

The aim of this study was to evaluate on the removal effect of total nitrogen and posphorus in municipal wastewater by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process using influent as a Carbon Source. CNR(Cilium Nutrient Romoval) is the process combining $A^2$/O process with cilium media of H2L corporation. The removal efficiencies for BOD$_{5}$, T-N and T-P were 81.1%, 61.4%, 61.4%, respectively. The removal efficiency of nitrogen and posphorus were low by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process.s.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.98-102
• /
• 2000

The aim of this study was to evaluate on the removal effect of total nitrogen in municipal wastewater by decreasing hydraulic retention time(HRT) from 6 hour to 4 hour on CNR process. CNR-A(Cilia Nutrient Removal) is the process combining A2/O process with cilium media of H2L corporation. The removal efficiencies for T-N were 63.1% in A-1 reactor, and 73.5% in A-2 reactor and 77.0% in A-3 reactor. The specific nitrification(g-NH3-N/g-MLVSS.d) of Oxic in CNR-A process was 0.07-0.32. The specific denitrification in Anoxic and the specific nitrification inOxic was higher in HRT 4 hour because of optimum F/M ratio.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.79-83
• /
• 2001

The sludge wastes fermentation process reactors were operated to produce the VFAs(volatile fatty acids) as supplemental carbon sources and to determine the optimum operating conditions. The experiment was carried out by varied mixture ration of 400:0 350:30 300:100 200:200 and operating temperature 2$0^{\circ}C$ 3$0^{\circ}C$ and 4$0^{\circ}C$ The results were as follows: Higher VFAs production rate observed at higher mixed ratio of primary sludge. When the mixed ratio of primary sludge and return sludge were 400:0 350:50 300:100 200:200 respectively. VFAs production are were 829.6mg/l 944.2 mg/l 597.9mg/ml an d441.6 mg/l , respectively. the yield of VFAs increased with temperature, but decreased with initial TSS concentration Because fermented sludge has relatively low nitrogen and phosphorus and relatively high VFAs it can be used as a substitute for external carbon in biological nutrient removal process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.763-768
• /
• 2000

In this study, the tests were performed on a series of reinforced concrete strip specimens to investigate a cracking behavior of reinforced concrete voided slab bridge. Also, the mid-span deflections, the crack widths and failure mode of reinforced concrete strip specimens were studied. It was found that serviceability of cracking and deflection at reinforced concrete voided slab bridge which were constructed and designed under verifying serviceability as design criteria are lower than common reinforced concrete member. On the basis of the experimental results, it is more reasonable concrete to evaluate crack occurring $f_r=2.0\surd{f_{ck}}$ rather than modulus of rupture of concrete, $f_r=0.8\surd{f_{ck}}$

• 환경기술인
• /
• 통권169호
• /
• pp.65-73
• /
• 2000

1999년 G-7 환경공학기술개발사업의 일환으로 CNR공법을 이용한 하수처리장의 탈질, 탈인을 위한 상용화기술개발연구의 결과를 요약하면 다음과 같다. 1999년 3월부터 1999년 12월 16일까지의 실험기간 중 1톤 PILOT 반응조와 2000년 1월 18일부터 2000년 4월 30일까지의 실험기간 중 구리하수처리장에 설치한 50톤 PILOT의 운전결과는 다음과 같다. CNR공법은 우리나라의 일반적인 하수성상에서 운전관리가 원활하면 동절기와 유기물 부