• Journal of Korea Foundry Society
• /
• v.11 no.4
• /
• pp.303-313
• /
• 1991

The Purification mechanism of high purity aluminum was studied through the variation of stirring speed and coolant flow rate in the stirring method. In the stirring method the degree of purification was changed as the following factors;the variation of diffusion boundary layer thickness the variation of growth rate and the solute concentration of the residual melt. The concentration of Fe and Si was decreased as the stirring speed and the radial distance increased. In a high stirring speed of 2000rpm with unidirectional stirring mode, the uniformity of solutes was obtained. On the other hand, the purification of Si was done by the combinations of stirring method, fractional melting and acid leaching. In the case of Si purification, the centrifugal force developed in the melt acted as the significant purification factor. It was possible to obtain the purified 3N grade Si crystal after the complete elimination of residual aluminum by fractional melting and acid leaching.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.919-926
• /
• 2009

Renewable energy or green energy is a hot issue in theses days. Since wind resource can be endlessly supplied by nature, researchers and common people are interested in study how to use that resource at home or company. Especially, many architects have tried to integrate wind power generator for a part of building. So in this paper, three buildings installed wind power turbine are targed to CFD analysis and these buildings are Bahrain trade center, Discovery tower, and Pearl river tower. Bahrain trade center is the first building installed real wind turbine, Discovery tower is constructing at Texas, and Pearl river tower is designed and proved by china researchers. These buildings have very different type of wind power turbine and each turbine has different conditions f3r best power generation. Therefor this paper will focus on characteristic shape of buildings, wind power turbine type, and expected purpose of construction. Moreover, CFD analysis will show wind flow pattern and wind speed while wind is passing through wind turbine of three tall buildings. CFD analysis for three buildings make comparison the wind flow patterns with experimental result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2100-2108
• /
• 2001

The impinging tones by high-speed plane jets are experimentally investigated to study the edgetone characteristics. Experiment used a slit nozzle and a wedge system to generate edgetones. The jet in the experiment is varied from low to high subsonic speed to obtain the effect of the speed on the frequency characteristics of impinging tones. The experimental data obtained previously fur edgetones and platetones by various nozzles are compared with the present edgetone data. And the condition of tone generation, the frequency ranges, the effective source point and the sound pressure level are compared and discussed. It is found that the jet speed has no diect influence on the impinging tone characteristics. Regardless of the jet speed, the effective source point is about a quarter wavelength downstream from the edge tip. With increase in jet speed, the influence of the nozzle configuration is decreased and the operating frequencies show good coincidences by normalized parameters based on the slit thickness.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1057-1064
• /
• 2009

This paper introduces a new approach based on a quantum-inspired evolutionary algorithm (QEA) to solve unit commitment (UC) problems. The UC problem is a complicated nonlinear and mixed-integer combinatorial optimization problem with heavy constraints. This paper proposes a bounded quantum evolutionary algorithm (BQEA) to effectively solve the UC problems. The proposed BQEA adopts both the bounded rotation gate, which is simplified and improved to prevent premature convergence and increase the global search ability, and the increasing rotation angle approach to improve the search performance of the conventional QEA. Furthermore, it includes heuristic-based constraint treatment techniques to deal with the minimum up/down time and spinning reserve constraints in the UC problems. Since the excessive spinning reserve can incur high operation costs, the unit de-commitment strategy is also introduced to improve the solution quality. To demonstrate the performance of the proposed BQEA, it is applied to the large-scale power systems of up to 100-unit with 24-hour demand.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.5
• /
• pp.569-581
• /
• 2003

A method of synthetic time series generation was developed and applied to the simulation of homogeneous turbulence in a periodic 3 - D box and the hourly wind data simulation. The method can simulate almost exact sample auto and cross correlations of multiple time series and control non-Gaussian distribution. Using the turbulence simulation, influence of correlations, non-Gaussian distribution, and one-direction anisotropy on homogeneous structure were studied by investigating the spatial distribution of turbulence kinetic energy and enstrophy. An hourly wind data of Typhoon Robin was used to illustrate a capability of the method to simulate sample cross correlations of multiple time series. The simulated typhoon data shows a similar shape of fluctuations and almost exactly the same sample auto and cross correlations of the Robin.

• Journal of Korea Foundry Society
• /
• v.10 no.4
• /
• pp.324-331
• /
• 1990

The single crystal of CdTe was grown by modified 6 zone Bridgman method under the conditions of excess Te and excess Cd. To prevent the constitutional supercooling, the crystal growth was done under the temperature gradient of $17^{\circ}C/cm$ in front of the solid /liquid interface and the growth rate was 3mm/hr. The grain morphologies and the growth mechanism were investigated in excess Te and excess Cd conditions. The grain size of excess Te crystal was increased with an increase of the distance from the tip but, in the case of excess Cd crystal, single crystal was not obtained because of the cavities due to the excess Cd vapors so that the grain size was not increased with an increase of the distance from the tip. In addition, the growth of single crystal of CdTe was done with repeated necking ampoule. It was found that the necking had no effects on the grain selection because the cavities trapped in the necking portion acted as heterogeneous nucleation sites.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.64-67
• /
• 1997

In the total artificial heart(TAH), a transcutaneous information transmission system(TITS) is vely important to monitor the TAH status and detect the device failure, and repair the possible problems. First of all, the communication channel(skin) and method were simulated in terms of transmittance, scattering, reflection and absorption, then the system was designed with size reduction including low power consumption and reliability compared to the previous one. The informations are transmitted through the skin(approximately 1cm in depth) by frequency modulated near infrared(NIR) pulses using 780nm laser diodes as transmitters and photodiode as receiver with high speed and high spectral sensitivity. The logic high and low frequencies are 3MHz, 1MHz respectively. The system is a bidirectional data link for more than 38.4Kbps data rate, full-duplex with a bit error rate of less than $10^{-5}$.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.55-58
• /
• 1997

In this paper we reviewed and stated the present state of our team's research of the moving-actuator type total artificial heart (MA-TAH). Especially, this paper showed new direction of researches. The integrated research of battery, telemetry, TET is required. And the real-time supervisory of the state of hemodynamic variables and MA-TAH is also needed. These requirement made us to think the supervisory control system (SCS). As functional abilities of the SCS require very high computational cost, the digital signal processor is an appropriate choice for our need.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.369-378
• /
• 2003

This study proposed a damage index for steel members and examined a process where steel square tubular columns under cycle loading failed to meet the damage index. A nonlinear analysis was carried out and a damage process analyzed using a finite element program. Material properties and strain characteristics were obtained from material testing. The effect on the damage of members was analyzed according to varying kinds of steels and conditions of loading based on material testing results. According to strain characteristics and cumulative plastic strain of each variable, the effect of conditions of loading and kinds of steels on the damage could be estimated quantitatively.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.239-240
• /
• 2017

본 연구는 의료영상내 특징정보를 추출 및 평가함으로서 정밀의료 실현 가능성을 확인하고자 하였다. 영상화는 PET/CT 및 MRI 스캐너를 이용하여 암환자의 기능적 정보와 해부학적 정보를 획득하고 관심영역을 설정하였으며 각각의 영상내 특징정보를 추출하였다. 영상내 특징정보는 GLCM을 이용하여 에너지, 대비, 엔트로피, 균질성을 획득하였고, 획득된 영상 데이터에 따른 관심영역 설정 차이를 확인하였다. 영상내 특징 정보는 MRI 영상의 해부학적 정보를 이용한 분석결과에서 엔트로피 및 균질성이 PET 보다 증가 하였고 대비는 감소함을 확인하였다. 추후연구는 다양한 영상내 특징 정보를 획득하고 정밀의료를 위한 기계학습에 활용할 예정이다.