• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.77-79
• /
• 1998

클라이언트/서버 환경에서 성능향상을 위해서는 네트워크의 속도 향상, 서버와 클라이언트의 충분한 하드웨어와 운영체제, 데이터 베이스의 구성, 애플리케이션의 디자인을 고려해야한다. 하드웨어에 추가되는 비용 없이 성능향상을 하기 위해서는 최적의 애플리캐이션을 사용해야하는데. 코딩단계에서 개발 코드의 시스템 부하량을 측정하여 개발자에게 정보를 제공한다면 최적의 애플리케이션 개발이 용이할 것이다. 본 논문에서는 소스 코드의 정적 분석을 통해 시스템 부하량을 측정하는 시뮬레이터의 개발에 대해 논의한다.

• The Journal of Information Technology
• /
• v.8 no.4
• /
• pp.43-50
• /
• 2005

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of color paper. The hardener was prepared by the reaction of cyanuric chloride with sodium hydroxide, disodium hydrogenphosphate-12-water and trisodium phosphate-12-water in the presence of water. The hardener used in this study is a 2,4-dichloro-6-hydroxy-1,3,5-triazine mono sodium salt. The hardening test of photographic emulsion was studied respectively at pH 5.5, 7, 8.5 and about increasing temperature. Novel hardener can be used in photo-graphic emulsion of color paper and showed very good hardening effect.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2844-2851
• /
• 2011

The purpose of this study is to set up an acoustic prediction technique and to perform the IL test of scale down noise reducing device for the development of the noise reducing device as the development of 400km/h class high speed train. First of all, the IL prediction of noise reducing device was performed with the 2D BEM method. And the noise test of scale down noise reducing device in anechoic chamber was performed for the verification of acoustic prediction technique and IL performance evaluation. As the results, the acoustic prediction technique for the development of noise reducing device was verified because the averaged IL difference between prediction and test is in 2dB(A). And the measured IL value of noise reducing device is less than 2dB(A), and additional IL with polyester absorption material is increased about 0.5dB(A).

• Journal of ILASS-Korea
• /
• v.23 no.3
• /
• pp.109-113
• /
• 2018

The critical heat flux of spray cooling were measured on the test surface of 10 mm diameter made by stainless steel. The experiments were carried out for the droplet-flow-rate of $0.00002{\sim}0.003m^3/(m^2s)$ and liquid subcooling temperature of $40{\sim}75^{\circ}C$. Experimental results showed that the critical heat flux of spray cooling increased remarkably with the increase of droplet-flow-rate. Meanwhile, the effect of liquid subcooling on critical heat flux of spray cooling appeared weakly under the present experimental conditions. In additions, correlation between the dimensionless critical heat flux and Weber number based on droplet-floe-rate was developed for experimental results.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.210-211
• /
• 2013

냉동차량은 이동 또는 정차 중에도 냉동 부하에 일정 온도를 유지 시켜야한다. 종전의 상용차량에 냉동시스템은 차량의 엔진과 연계하여 압축기를 구동하거나 엔진과 연계된 발전기의 전력을 이용하여 일정 온도를 유지하였다. 이러한 방식은 제어가 쉽지 않고 효율이 낮은 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 냉동차량이 정차 중인 무시동 기관에서도 일정 온도를 유지 할 수 있도록 센서리스 제어방식이 적용된 3상 인버터를 제안하였다.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.27-40
• /
• 1991

Delay is an widely-used tool for evaluating the operation of signalized intersections. This paper presents two mathematical models: a model converting stop delay into approach delay : and a model estimating delay at isolated signalized intersection. To develop the delay-conversion model, actual stop delay and approach delay experienced by individual vehicles were measured and then their relationship was formulated using ma-thematical procedure. the formula expressing the approach-delay to stop-delay ratio was a monotonously decreasing function of effective red time. New delay model was developed based on the following criteria; the fitness to measured delay for undersaturated traffic condition and the convergence to the deterministic overflow delay for oversaturated traffic condition. Performance of this model was better than those of other existing models based on the comparison study.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.175-180
• /
• 2001

In this study, the minimum heat flux conditions are experimentally investigated for the spray cooling of hot plate. The hot plates are cooled down from the initial temperature of about $900^{\circ}C$, and the local heat flux and surface temperatures are calculated from the measured temperature-time history. The results show that the minimum heat flux point temperatures increase linearly resulting from the propagation of wetting front with the increase of the distance from the stagnation point of spray flow. However, in the wall region, the minimum heat flux point temperature becomes independent of the distance. Also, the experimental results show that the velocity of wetting front increases with the increase of the droplet flow rate.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.208-213
• /
• 2001

The minimum heat flux conditions are experimentally investigated for the subcooled liquid film flow on the horizontal plate. The experimental results show that the minimum heat flux point temperature becomes higher with the increase of the velocity and the subcooling of the liquid film flow. However, the effect of distance from the leading edge of the heat transfer plate on the minimum heat flux is almost negligible. Also, the experimental results show that the propagation velocity of wetting front increase with increasing the velocity and the subcooling of the liquid film flow.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.7-9
• /
• 1996

Here, A forty year old patient is presented, showing azoospermia following vasovasostomy. The bilateral testicular biopsies were performed to confirm whether ductal obstruction due to vasovasostomy or testicular failure existed. The finding of biopsy was spermatogenic arrest. After completion of medical testicular stimulation with clomiphene citrate and pentoxifilline for 3 months, repeat vasovasostomy was performed. Semenanaylsis revealed normal sperm parameters after operation. Necessity of testicular biopsy before deciding repeat vasovasostomy, accuracy of testicular biopsy, efficacy of testicular stimulation in the patient with spermatogenic arrest and effect of testicular biopsy on testicular fuction are discussed.

• 대한예방의학회:학술대회논문집
• /
• 2001.10a
• /
• pp.386-387
• /
• 2001