• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.481-486
• /
• 2020

To evaluate geochemical characteristics of surface sediments in Samcheok Port, the distribution characteristics of particle sizes, organic matters and heavy metals were investigated. The sediments showed a mixed property of sand, silt, and clay, however fine-grains dominated at the inner port and coarse-grains dominated at the outer port. The organic (COD, TOC, and IL) contamination of the sediment at the inner port were higher than that of the outer port, and the concentrations of total nitrogen and total phosphorus at the inner port was higher than those of the outer port. Also, heavy metals contamination of surface sediments at the inner port was higher than those of the outer port (except for As). From the results of high organic matter concentrations and C/N ratio at the inner port, it is considered that the contamination of organic matters was mainly derived from the land. The correlation analysis among the particle size, chemical composition, and heavy metals resulted in high correlation between silt-clay and heavy metals, and between organic matters and heavy metals. The sequential extraction results of heavy metals showed the sum of exchangeable, carbonate, and oxide fractions of Ni, Zn, Cu, Pb, Cd, and As were 14.8, 49.8, 39.1, 32.2, 51.8 and 26.6%, respectively.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.743-758
• /
• 2014

It has widely been recognized that the EXPO 2012 Yeosu Korea was a succeeded mega event, according to, at least, the international media's attention and reports. This study analysed and compared the trends of the international media's reports on Yeosu in terms of before, preparing, during, and, after periods of the event, through a semantic network analysis. It was revealed that the images of Yeosu have dramatically been upgraded. The city of Yeosu, before the event, was a small port city of South Korea's southern part of peninsula. The city, after the nomination for the next host city of the exposition, was described to a city who had a full potentiality to host a world exposition, not a southern port city of South Korea. After the event was opened, Yeosu was a city of cutting-edge technology and cultural creativity, who had contributed to solve our humankind's pending ecological problems. Even after the events closed, Yeosu was continuously impressed as a ex-city of world exposition, a hub city of Asia trade, and a center for marine ecological restoration. It was suggested that extended monitoring, differentiated communication strategies, long-term planning, and professionalization of the staffs.

• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.147-153
• /
• 2001

We have discussed that the total body irradiation(TBI) dose distribution of 6 and 10 MV photon beams, also differences between calculation dose use of compensator sheet and measurements in humanoid phantom. Total body irradiation and hemi-body irradiation(HBI) can be effectively performed when uniformity of dose distribution is estabilished. The method of TBI and HBI dosimatry requires special considerations related to technique, long distance and very large field, machine parameter, patient positioning. TBI and HBI with megavoltage photon beams requires basic dosimatric data which have to be measured directly or derived from the standard beam data. The semiconductor detector and ion chamber were positioned at a dmax depth, mid depth, and its specific ratio was determined using a scanning data by RFA-7 3-dimensional water phantom and solid phantom. The effective source axis distance 380 cm, the field size from 120 cm to 152 cm, isodose distributions were analyzed as a function of the thickness in phantom. Also, have discussed that the measurement of basic data for clinical photon beams for dosage calculations, data calculation sheet and the use of tissue compensation to improve dose uniformity. We have improved a dose uniformity in the TBI and HBI method.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.195-201
• /
• 2002

Several investigators have presented the effects of external magnetic fields on the dose distributions for clinical electron and photon beams. We focus the low energy electron beam with more lateral scatter In this study we calculated the beam profiles for an clinical electron beam of 6 MeV with longitudinal magnetic fields of 0.5 T-3.0 T using a Monte Carlo code. The principle of dose enhancements in the penumbra region is to deflect the laterally scattered electrons from its initial direction by the skewness of the laterally scattered electrons along the direction of magnetic field lines due to Lorentz force under longitudinal magnetic field. To discuss the dose enhancement effect on the penumbra area from the calculated results, we introduced the simple term of penumbra reduction ratio (PRR), which is defined as the percentage difference between the penumbra with and without magnetic field at the same depth. We found that the average PRR are 33%, and 49% over the depths of 1.5 cm, 2.0 cm, and 2.4 cm for the magnetic fields of 2.0 T and 3.0 T respectively. For the case of 0.5 T and 1.0 T the effects of magnetic filed were not observed significantly. In order to obtain the dose enhancement effects by the external magnetic field, we think that its strength should be more than 2 T approximately. We expect that the PRR would be saturated to 50-60% with magnetic fields of 3 T-5 T As a result of these calculations we found that the penumbra widths can be reduced with increased magnetic fields. This Penumbra reduction is explained as a result of electron lateral spread outside the geometrical edges of the beam in a longitudinal magnetic field. This means that the electron therapy benefits from the external magnetic fields.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.9-21
• /
• 1999

The waterjet is very widely used today in propulsion system of high speed vessel but manufacturer is limited because of an efficiency and a difficulty of a manufacture on the inlet configuration of the waterjet. The importancy in designing the inlet configuration of the waterjet lies on the minimization of the cavitation which is largely affecting the efficiency. In this paper, the configuration analysis is carried out to find a optimum shape which is minimizing the cavitation using a two dimensional potential-based panel method with an inlet configuration of a flush type. Also, it is developed a direct design method finding an inlet configuration by a given pressure distributions. The numerically obtained optimum shape using this configuration analysis method show a good agreement compared to the Kashiwadani's results. It is carried out a direct design method over a lip and a ramp of an inlet configuration wish pressure distributions obtained a result of the configuration analysis and the results show a good agreement compared to original configuration.

• Solar Energy
• /
• v.11 no.2
• /
• pp.41-50
• /
• 1991

Heat transfer phenomena and temperature characteristics in heat storage and release process in the heat storage system using PCM(Phase Change material) were studied experimentally. The melting points of Octacosane paraffin($C_{28}H_{58}$) and sodium pyrophosphate decahydrate ($Na_4P_2O_7{\cdot}10H_2O$) used for phase change materials are $62^{\circ}C$ and $79^{\circ}C$ respectively. Experiments were performed in order to investigate temperature distributions, the heat storage quantity and the release quantity on octacosane paraffin and sodium pyrophosphate decahydrate for heat storage and release in the heat storage system. Furthermore the comparison of these characteristics between paraffin and $Na_4P_2O_7{\cdot}10H_2O$ were evaluated. In case of the paraffin, temperature slowly increased at early heat storage process by natural convection, while temperature of $Na_4P_2O_7{\cdot}10H_2O$ rapidly increased the dominant role played by conduction at early heat storage processing Also, during the heat storage and release process in case of the paraffin, it was observed that the variation of temperature of the neighborhood of wall and center in the top and bottom of the tube exhibited a great difference, however in $Na_4P_2O_7{\cdot}10H_2O$, it was observed that the variation of temperature exhibited a little difference. And heat storage quantity of each PCM of identity mass in heat storage process was shown that $Na_4P_2O_7{\cdot}10H_2O$ exhibited more by 16 percents than paraffin.

• Solar Energy
• /
• v.16 no.2
• /
• pp.113-122
• /
• 1996

This study presents experimental results of heat transfer characteristics of P.C.M. during outward melting process in a vertical cylinder. The experiment was carried out in six conditions, i. e., three different inlet temperature($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$) and two directions of working fluid(upward and downward). Melting P.C.M. produced a bell-shaped phase change interface. When the inlet temperature was $7^{\circ}C$, the lower region remained at $4^{\circ}C$ until the temperature of upper region reached $4^{\circ}C$. This was due to the state of maximum density of the lower region. When the direction of the working fluid in the case of $7^{\circ}C$, inlet temperature, was upward, the rate of melting and the total melting energy were higher than when it's direction was downward. But the rate of melting and the total melting energy appeared higher value as it's direction was downward when the inlet temperature is $4^{\circ}C$ and $1^{\circ}C$.

• Journal of Digital Convergence
• /
• v.13 no.3
• /
• pp.117-125
• /
• 2015

In case that they do not have counterstrategies ready for patent disputes in advance, they would not be able to survive competitions or would fall behind in the market. Most of domestic companies are not equipped with appropriate counterstrategies, and there are only few studies on the countermeasures for patent disputes. Thus, this study examined counterstrategies for patent disputes drawn from cases of smartphone patent disputes and preceding researches, and conducted interviews and surveys with patent experts and company executives to grasp their opinions about the effectiveness of countermeasures for patent disputes related to the smartphone field. As for analysis tool, the Delphi method is selected that is usually used for analyzing relatively a small number of expert opinions. As a result of interviewing patent experts, effective countermeasures turned out to be cross licensing, counter-suit, and patent invalidation suit, in order, and as a result of surveys with company executives, they turned out to be patent invalidation suit, counter-suit, cross licensing, suit through solidarity, and loyalty agreement, in order. It is anticipated that the study results could be used for smartphone manufacturing companies and ICT companies to establish counterstrategies for patent disputes.

• Journal of Veterinary Clinics
• /
• v.31 no.5
• /
• pp.371-375
• /
• 2014

This article describes the use of laparoscopic-assisted cystoscopy for removal of urinary calculi in five dogs. All dogs had micturition disorder due to urinary calculi. The surgical technique used was same in all cases. A urethral catheter passed into the urinary bladder through the urethra preoperatively. A 5-mm diameter cannula was placed in the ventral midline, 1 to 2 cm cranial to the umbilicus, and the 5-mm laparoscope was introduced via the cannula. A 10-mm diameter cannula was placed adjacent to the apex of the bladder under the visual guidance of laparoscopy. The bladder was then partially exteriorized through the 10-mm portal site, and a stab incision was performed on the bladder wall. The incisional margin of the bladder was sutured to the skin of the second portal site in $360^{\circ}$ simple continuous suture. A 2.7-mm diameter cystoscope with a sheath was introduced into the bladder lumen. The cystic and urethral calculi were removed under the visual guidance of cystoscopy with continuous fluid flushing. No major postoperative complications were identified. During the follow up period (range 7 to 21 months), no episodes of urinary dysfunction or recurrence of clinical signs were observed.

• Journal of Veterinary Clinics
• /
• v.29 no.5
• /
• pp.408-411
• /
• 2012

Laparoscopic-assisted ovariohysterectomy was performed in a cat (2.7 kg) with pyometra. A 10-mm operative laparoscope was inserted into the abdomen through an umbilical port. A transabdominal suspension suture was placed to maintain the exposure of the ovarian vascular pedicle. The ovarian vascular pedicle and suspensory ligament were progressively cauterized and transected with 5-mm multifunction bipolar grasping forceps. Both ovaries and the uterus were exteriorized via 5-mm caudal port enlarged to 2 cm. The uterine body and associated arteries were ligated, transfixed, and transected under direct vision. No peri- or post-operative complications were encountered. To the authors' knowledge, this is the first report of the use of laparoscopy for the treatment of pyometra in the cat.