• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1399-1402
• /
• 2003

Paul Hocker has developed new attacks based on the electric consumption of cryptographic device such as smartcard that performs cryptographic computation. Among those attacks, the Differential Power Analysis(DPA) is one of the most impressive and most difficult to avoid. By analysing the power dissipation of encryption in a device, the secret information inside can be deduced. This paper presents that Advanced Encryption Standard(AES) is highly vulnerable to DPA and readily leaks away all secret keys through the experimental results for DPA. After all, it is required an implementation of the AES algorithm that is not vulnerable to DPA. We also propose countermeasures that employ asynchronous circuit.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.713-716
• /
• 2000

본 논문에서는 프레임간 압축 영상의 열화 과정의 모델과, 동영상에 존재하는 블록화 현상을 제거하는 방법을 제안한다 BDCT기반으로 압축된 정지영상은 DCT계수를 양자화 하는 과정이 블록별로 처리되기 때문에, 블록 경계에 불연속이 발생한다. 동영상의 경우 블록 경계에서 불연속이 발생 할 뿐만 아니라 움직임 보상과정이 합쳐진 혼성 구조로 되어 있어서 블록 내부에서도 불연속이 존재하게 된다. 블록 영계만을 생각한 기존의 처리방법은 동영상의 처리에 있어 적합하지 못하다. 따라서 본 논문에서는 효율적인 블록화 현상 제거를 위해, 양방향 움직임 보상과 반화소 정밀도를 이용한 새로운 평활화 제약조건을 구성하고 차분 영역에서의 정규화 방법을 이용한 알고리듬을 제안한다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.124-126
• /
• 1996

In this paper, the driving systems of the Fiber Optic Gyrocompass absolutely required a constant speed and a precise position control with fine step angle, are presented. One of the proposed systems is a stepping motor system with microstep driver, another one is a DC servo motor. Experimental results indicate that a low cost and simple FOG driving system using a stepping motor is capable of a satisfactory operation.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.660-666
• /
• 2001

수용계를 이용하여 졸겔법으로 중성 TiO$_2$졸을 제조하였다. 용매로 에탄올을 사용한 경우 메탄올에 비해 졸의 안정성이 우수하였다. 졸 제조시 에탄올을 사용하면, 메탄올을 용매로 사용할 경우보다 중심 금속에 부착되는 알콕시족의 크기가 작아져서 티타늄알콕사이드의 가수분해 속도가 빨라지기 때문이다. TTIP : AcAc : EtOH : $H_2O$ : PEG : HCl의 몰비가 1 : 1 : 8 : 50 : 0.5 : 0.15의 조성을 갖는 에탄올 용매 졸은 30일까지도 안정한 상태를 유지하였고 코팅성이 양호하였다. 10회 반복 침지, 건조 및 50$0^{\circ}C$에서 열처리된 두께 약 $1.5mu extrm{m}$의 TiO$_2$박막은 표면이 균질하고 치밀한 미세구조를 보였다. 제조한 TiO$_2$박막은 가시광선 영역에서 약 70%의 투과도를 나타내었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.33 no.1
• /
• pp.58.1-58.1
• /
• 2008

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.475-482
• /
• 2014

A wide variety of contents are now provided along with the development of information appliances. The purpose of this study was to examine what should be considered to boost the quality of mobile device based e-learning contents. For this study, 12 evaluation domains and 26 evaluation items were selected using the Delphi method. The factors to be considered for mobile device based e-learning contents quality are summarized 4 factor. In other words, for the purpose of managing the quality of mobile device based e-learning contents, there exist four areas to be considered, 'foundation', 'contents', 'teaching design' and 'technology.' The findings of this study are expected to contribute to the improvement of the quality of the educational contents.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.225-226
• /
• 2012

Nowadays the widely used media in architecture include visualizations, animations and three-dimensional models. An optimized 3D digital method using active CAM(Computer Aided Manufacturing) and CNC(Computerized Numerical Control) imaging is developed for accurate shape and 3D measurements in freeform buildings in this paper. In contrast to a conventional building using auto CAD system and others, the proposed active digital optimization is based on a combination of 3D numerical data and parametric 3D model. The objective of this paper is therefore to present digital optimization method for constructability of freeform building. The 3D digital optimization method is appropriate to serious variations in freeform shape. The developed digital optimization method is necessary to be carried out to verify the robustness and accuracy for constructability.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1231-1235
• /
• 2004

The needs of micro scale thermal detecting technique are increasing in biology and chemical industry. For example, Thermal finger print, Micro PCR(polymer chain reaction), ${\mu}TAS$ and so on. To satisfy these needs, we developed a DTSA(Diode Temperature Sensor Array) for detecting and controlling the temperature on small surface. The DTSA is fabricated by using VLSI technique. It consists of 32 ${\times}$ 32 array of diodes (1,024 diodes) for temperature detection and 8 heaters for temperature control on a 8mm ${\times}$ 8mm surface area. The working principle of temperature detection is that the forward voltage drop across a silicon diode is approximately proportional to the inverse of the absolute temperature of diode. And eight heaters ($1K{\Omega}$) made of poly-silicon are added onto a silicon wafer and controlled individually to maintain a uniform temperature distribution across the DTSA. Flip chip packaging used for easy connection of the DTSA. The circuitry for scanning and controlling DTSA are also developed

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1247-1252
• /
• 2004

The present paper is devoted to the modeling method based on an averaging approach for thermal analysis of microchannel heat sinks subjected to the uniform wall temperature condition. Solutions for velocity and temperature distributions are presented using the averaging approach. When the aspect ratio of the microchannel is higher than 1, these solutions accurately evaluate thermal resistances of heat sinks. Asymptotic solutions for velocity and temperature distributions at the high-aspect-ratio limit are alsopresented by using the scale analysis. Asymptotic solutions are simple, but shown to predict thermal resistances accurately when the aspect ratio is higher than 10. The effects of the aspect ratio and the porosity on the friction factor and the Nusselt number are presented. Characteristics of the thermal resistance of microchannel heat sinks are also discussed.

• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.309-315
• /
• 2004

In the pressure sensor, about below 20 kPa, the center boss diaphragm structure is generally used, but it is hard to obtain the high sensitivity because the center boss structure is limited at the thickness and size of diaphragm with chip size. Therefore, this paper suggests that the Center boss structure has surface etched diaphragm using a stress concentration to improve the sensitivity. We carried out the simulation and fabrication applied new diaphragm design. In the result, the sensitivity is improved to 60% without the change of non-linearity (0.14%FS). So, the Center boss of surface etched diaphragm can be applied for the high sensitivity in the low-pressure sensor.