• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.195-201
• /
• 2011

This paper estimates the structural performance of spirally confined concrete having electric arc furnace (EAF) oxidizing slag aggregates. The EAF oxidizing slag is a by-product generated from iron and steel industry. The EAF oxidizing slag have been largely put to low-value-added uses due to its expansive properties of the free-CaO and free-MgO. Recently, this problem has been solved by the advances in steelmaking technology and thereby stabilizing EAF oxidizing slag aggregate. To verify the application of the EAF oxidizing slag aggregate to the structural concrete usage, a total of 27 cylindrical specimens with a diameter of 150 mm and a height of 300 mm were cast and tested. The test parameters were aggregate type and spiral reinforcement yield strength. Experimental results showed that the structural performance of specimens with EAF oxidizing slag aggregates was equivalent to that of confined concrete with natural aggregates.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2002

Reflection properties of $SiO_2$/ITO (Indium Tin Oxide) thin films coated for electromagnetic shielding, anti-static and anti-reflection on the front surface in CRT were studied. The behavior of reflectance as a function of thickness of $SiO_2$/ITO was investigated and applied to theoretical anti0reflection model of double layers and three layers. As the thickness of ITO layer increased, the deviation from theoretical value increased because uniformity of film deteriorated by pore. Because of the effect of mixed layer of $SiO_2$ and ITO, experimental reflectance showed better acceptance to the three layer antireflection model of $SiO_2$/$SiO_2$+ITO/ITO than the two layer model. Based on the theoretical antireflection design, the double layer whose thickness of $SiO_2$ and ITO were 90, 65 nm, respectively appear 2.5% in reflectance at standard wavelength, 550 nm. This phenomenon was similar to theoretical reflectance in visual range.

• Journal of Oriental Medical Thermology
• /
• v.2 no.1
• /
• pp.29-34
• /
• 2003

Purpose The purpose of this study was to verify the association between Cold Hypersensitivity and Orthostatic Hypotension(OH). Method This study was carried out on 39 women who visited outpatient department of Dept. of Gynecology. Bundang CHA oriental Hospital. College of Medicine. Pochun CHA univ. from December 2001 to November 2002. We divided them into two groups (Orthostatic Hypotension Group 24, Normal BP Group 15) and investigated general characteristics, weight, height, past history. family history through out the patient's note. OH was assessed 1 minute after the patients rose from a supine position by using tilting table. For the diagnosis of cold hypersensitivity, thermographic measurements were performed on two pairs of areas(palm-upper arm and back of hand-upper arm. And for that of the feet, other two pairs of areas(anterior thigh-top of the feet and posterior thigh-heel). And then by which verify the association between Cold Hypersensitivity and Orthostatic Hypotension(OH) Results As a results, 16 out of 24 patients, the OH group had cold hypersensitivity and 4 out of 15 Patients the normal BP group had cold hypersensitivity. It means that there was association between Cold Hypersensitivity and Orthostatic Hypotension(OH). Conclusion Above these results, we can reach the conclusion that OH is considered one of the causes of cold hypersensitivity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.586-593
• /
• 2005

It is very important to reduce the PAPR(Peak to Average Power Ratio) in the OFDM(Orthogonal Frequency Division Multiplexing) communication system. We propose an ACE(Active Constellation Extension) method that does not require the side information unlike the conventional PTS and SLM method. This ACE method is to clip the OFDM signal for the PAPR reduction. Then, the basic constellation actively moves into the higher level of M-QAM for the constellation extension due to the clipping. The already existing M-QAM system can be available so that it can be easily realized. So, we can get the target PAPR by the extension of the constellation level. In this paper, we can find the PAPR reduction of 4 dB by the 16-QAM extension, and can achieve the target PAPR by the 64-QAM ACE(Active Constellation Extension).

• Composites Research
• /
• v.24 no.4
• /
• pp.41-47
• /
• 2011

This paper deals with anisotropic property and structural analysis for short fiber reinforced plastic composites manufactured by the injection molding process. The common approach for modeling this type of material is the consideration of the material as homogenous and isotropic. However, the common isotropy approach often results in unexpected failure. To overcome this, new structure analysis methodology was developed in order to consider fiber orientation effect using injection mold flow analysis and Halpin-Tsai equations for unidirectional composites and taking an orientation average. The numerical predictions are compared to experimental data for tensile specimen. The predicted mechanical properties agree well with experimental data for fiber orientation and weld line effect. The analysis system was also applied to an automobile part. The proposed anisotropic model predicted different mechanical properties by position of the part and different mechanical performance of the part was changed according to injection gate position.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.335-341
• /
• 2002

In this paper, we investigated a novel UV sensor using evanescent field coupling between the side polished fiber and photo-functional polymer waveguide. It was found that resonant wavelength shifts occur due to variation in the refractive index of polymer planar waveguide for its photo-functional properties on exposed UV. Spiroxazine (photochromic dye) was used as the planar waveguide. The resonant wavelength responses were exhibited at 1.44 nm/mW, 1.64 nm/mW, and 1.78 nm/mW when UV irradiations were exposed for 20 seconds, 30 seconds, and 40 seconds, respectively. The recovery time of sensor was independent of UV exposure power and 90% recovery time was 100 seconds.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.21-29
• /
• 2012

The purpose of this study is to evaluate the mutual relations by measuring SNR from T2 weighted image and ADC values on the basis of the stiffness values from liver tissues. This study was conducted that total 37 people(23 of males and 11 of females) were taken the liver MRI examination and average age was $54.5{\pm}12.7$ years old. The equipment was MAGNETOM Skyra 3.0T (SIEMENS, Erlangen, Germany) and 32 channel body-array coil. The examination were conducted with HASTE T2 weighted image by axial plane, Spin-echo EPI (echo planner image) DWI (b-value = 800) and Magnetic resonance elastography. The ROIs (region of interest: 200-300 $mm^2$) were established on the basis of the first axial stiffness image corresponded 95% confidence interval from axial stiffness image and then were measured values. After drawing the grid lines, signals were measured SNR from T2 weighted image and ADC values on the same locations that were analysed other 3 planes respectively. The results were showed correlation (0.057) that were increased to SNR from T2 weighted image by increasing stiffness value that no significant difference statistically p = 0.003. Other results were showed correlations (-0.301) that were decreased to ADC values by increasing stiffness values that no significant difference statistically p = 0.088. In the 3.0T equipment, the results may be error in much the same fashion as the 1.5T from ADC values by evaluation of fibrosis stage. However, Magnetic resonance elastography would be useful method that is used to diagnose exactly liver fibrosis stages in the 3.0T.

• Korean Journal of Acupuncture
• /
• v.24 no.4
• /
• pp.13-24
• /
• 2007

Objectives : This article aims to give guidance on the conduct and reporting of case series and audits of acupuncture, based on common problems that have arisen in the past. This type of project, and particularly the prospective case series or pre- post-intervention study, may give valuable evidence of the overall effectiveness of acupuncture-for example in different situations and in different conditions- and provides one step in the research pathway before generating an hypothesis. Results & Discussion : The project should be designed with the aim of reducing bias as much as possible. Careful and detailed planning is essential for the project to produce worthwhile results that readers can evaluate and replicate. Ethical issues should be considered and formal approval may be necessary. The patient group should be recruited systematically and baseline data obtained. The treatment given should be systematic and decisions to change or end treatment made explicit. The outcome should be measured in ways that are known to be reliable and valid. Musculoskeletal problems can be evaluated with scales for pain and confirmed by measuring one other symptom such as stiffness or one other aspect such as bothersomeness. Global change scores also provide supporting information, and the MYMOP (Measure Yourself Medical Outcome Profile) measure is popular when patients with different conditions are included. The design of questionnaires for beliefs and attitudes is a specialised area that should not be attempted without expert help. Adverse events should also be recorded. Analysis of the data and the best way of summarising and presenting the results are also discussed.

• Journal of Veterinary Clinics
• /
• v.28 no.4
• /
• pp.387-393
• /
• 2011

Polygoni Multiflori Radix (PMR) a dried root tuber of Polygonum multiflorum Thunberg with bioactivities in bone metabolism is one of the most famous tonic traditional medicines in China, Japan and Korea.To observe the anti-osteoporotic effect of PMR, we observed the effects on proliferation and alkaline phosphatase (ALP) activity of primary osteoblasts, bone nodule formation, pit formation of osteoclasts and osteoclastogenesis in vitro. As the result of that, although PMR extracts have no meaningful changes on the the proliferation of primary osteoblasts, significant (p < 0.01) increases of ALP acitivity of osteoblasts were dose-dependently observed in all PMR extracts treated groups tested compared to that of vehicle control. It means that it enhanced the differentiation (ALP activity) and bone nodule formation of osteoblast. In addition, PMR extracts dose-dependently inhibits the pit formation and the number of multinucleated osteoclast-like cells (OCLs), osteoclastogenesis in vitro. Therefore these results show the possibility of PMR extracts as another anti-osteoporotic agents.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.36-42
• /
• 2003

The oxidation behaviors of Y-Cr bilayer deposited on ferritic steel by magnetron-sputtering for application of the Fe-Cr alloys as interconnectors of planar-type solid oxide fuel cells (SOFCs) were studied. After oxidation at $800^{\circ}C$ for 40 hours, the major phase of $Y_2$$O_3$and the minor phase of $YCrO_3$, $Mn_{1.5}$ $Cr_{1.5}$ $O_4$and Cr$_2$SiO$_4$were formed in the Y/Cr bilayered samples, while the major phase of Cr$_2$O$_3$and the minor phase of $Y_2$$O_3$were formed as the major phase in the Cr/Y bilayered samples. The Log(ASR/T) that expresses electric resistance of the Y/Cr coated specimen with nonconducting $_Y2$$O_3$oxide showed high value of -2.80 Ω$\textrm{cm}^2$$K^{-1}$ / and that of the Cr/Y coated specimen with conducting $Cr_2$$O_3$oxide appeared to be -4.11 Ω$\textrm{cm}^2$$^{K}$ . The electric resistance of the Y/Cr coated specimen was largely increased due to the formation of high resistance oxide scales. However, the Cr/Y coated specimen did not show any increase in the electric resistance and had the long-term stability of oxidation because there was no formation of the secondary phases with low conductivity.