• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.17-20
• /
• 2007

본 논문은 차량 내부에서 정면의 얼굴 뿐 아니라, 측면의 얼굴도 효과적으로 추출하기 위해 다시점의 Haar-like 특징을 결합하여 사용하는 방법을 개발하여 적용하였고, 얼굴의 위치변화에 비교적 강건한 HMM(Hidden Markov Model)기반의 얼굴 인식을 사용하며, 또한 다양한 얼굴자세, 조명환경 등의 다중 얼굴 자료를 기반으로 하는 다시점 얼굴 DB의 학습을 통해 보다 강건하게 얼굴을 인식할 수 있도록 개선하였다. PC를 통해 운전자의 얼굴이 정상적으로 인식되면 자동으로 시동모듈을 제어하여 시동을 걸어줌으로써 운전자의 편리성을 향상할 수 있고 운전자가 아닌 자가 운전석에 착선한 경우에는 획득된 운전자의 얼굴영상 부분을 원격단말기로 전송하여 운전자 또는 경찰이 이를 이용하여 도난을 방지할 수 있는 조치를 취할 수 있도록 지원한다.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.123-130
• /
• 2005

Zeolite X adsorbents with large surface area were prepared for using oxygen PSA adsorbent. Selective adsorption performance of nitrogen on the synthesized zeolite X adsorbent was improved by the cation exchange of adsorbent. The zeolite X which had over $650m^2/g$ surface area was synthesized at the conditions of $SiO_2\;:\;Na_2O\;:\;H_2O\;:\;Al_2O_3$ = 2.5 : 3.5 : 150 : 1 mole ratio, $98^{\circ}C$ temperature and 18 h synthesized time in 50 L reactor. The metal ions Li, Ag, Ca, Br, Sr, etc. were investigated for ion exchange with zeolite X. Ag ion was showed the highest ion exchange rate among these metal ions and all metal ions were exchanged with Na ion at equivalent rate. Compared with the NaX adsorbent, the ion exchanged zeolite X adsorbent remarkably improved its adsorption performance of nitrogen at the conditions of $10{\sim}40^{\circ}C$ temperature and 0~9 atm pressure. At an equilibrium pressure under 0.5 atm, adsorption performance of nitrogen on the ion exchanged zeolite adsorbent increased in the order of Ag > Li > Ca > Sr> Ba > K, whereas at an equilibrium pressure over 1 atm showed in the order of Li > Ag > Ca > Sr > Ba > K. Nitrogen/oxygen separation factor of Li ion exchanged zeolite X adsorbent was 13.023 at the partial pressure of nitrogen/oxygen gas mixture similar to air and $20^{\circ}C$ adsorption temperature.

• Atmosphere
• /
• v.34 no.2
• /
• pp.139-151
• /
• 2024

The Yeongdong region has suffered from severe snowstorms and the relevant damage such as traffic accidents on slippery roads, and the collapse of greenhouses and temporary buildings. While a lot of research on snowfall has been conducted, the detailed study of snow crystals' phase and habit through intensive observations and the relevant microphysical analysis is still lacking. Therefore, a snowflake camera, PARSIVEL, and intensive radiosonde soundings were utilized to investigate phase and habit changes in solid precipitation. Two remarkable episodes of phase and habit changes were selected such as 19 March 2022 and 15 February 2023. Both events occurred in the synoptic condition of the High in the north and the Low passing by the south, which was accompanied by rapid temperature cooling below 2.5 km. During the events of a short period between 3 to 6 hours, the temperature at 850 hPa decreased by about 4 to 6℃. This cooling led to a change in the main habit of snow particles from riming to aggregate, identified with both MASC and PARSIVEL. Meanwhile, the LDAPS model analyses do not successively represent the rapid cooling and short-term variations of solid precipitation, probably by virtue of overestimating low-level equivalent potential temperature during these periods. The underlying causes of these the low-level temperature variations within 6 hours, still remain unclear. It might be associated with mesoscale orographic phenomenon due to the mountains and East Sea effects, which certainly needs an intensive and comprehensive observation campaign.

• Atmosphere
• /
• v.34 no.3
• /
• pp.305-317
• /
• 2024

The study examines the effects of parameters that define the characteristics of raindrops on the simulated precipitation during the summer season over Korea using the Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) cloud microphysics scheme. Prescribed parameters, defining the characteristics of hydrometeors in the WDM6 scheme such as a_R, b_R, and f_R in the fall velocity (V_R) - diameter (D_R) relationship and shape parameter (𝜇_R) in the number concentration (N_R) - D_R relationship, presents different values compared to the observed data from Two-Dimensional Video Disdrometer (2DVD) at Boseong standard meteorological observatory during 2018~2019. Three experiments were designed for the heavy rainfall event on August 8, 2022 using WRF version 4.3. These include the control (CNTL) experiment with original parameters in the WDM6 scheme; the MUR experiment, adopting the 50th percentile observation value for 𝜇_R; and the MEDI experiment, which uses the same 𝜇_R as MUR, but also includes fitted values for a_R, b_R, and f_R from the 50th percentile of the observed V_R - D_R relationship. Both sensitivity experiments show improved precipitation simulation compared to the CNTL by reducing the bias and increasing the probability of detection and equitable threat scores. In these experiments, the raindrop mixing ratio increases and its number concentration decreases in the lower atmosphere. The microphysics budget analysis shows that the increase in the rain mixing ratio is due to enhanced source processes such as graupel melting, vapor condensation, and accretion between cloud water and rain. Our study also emphasizes that applying the solely observed 𝜇_R produces more positive impact in the precipitation simulation.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.200-200
• /
• 2001

백판지 면성은 표면 백색도의 변이, 불투명도의 변이, 광택도, 거치름도, 표면 지합, 표면 요철 등 다양한 인자들로 표현되고 있다. 인쇄소에서는 인쇄를 하기 때문에 화선 부에서의 백색도나 불투명도 등은 크게 불만 요소로 작용하지는 않으나 표면 요철의 경우에는 인쇄 후 화선부에서도 나타나기 때문에 고객 불만의 한 요소로 인식되어 진 다. 따라서 본 연구에서는 백판지 면성의 여러 인자 중 표면 요철의 평가에 대해 다루 고자 하였다. 백판지 표면 요철을 시각적으로 나타내기 위한 방법으로 3-Dimensinal topography를 얻을 수 있는 Zygo와 Stylus를 이용, FFT 변환을 통하여 2-dimensional topography를 얻는 방법이 연구되었다. 그러나 기자재 비용, 측정 시간 등의 문제 등으로 표면 요철 을 평가하기 어려운 점이 있다. 본 연구에서는 백판지를 T APIO를 이용하여 O.2mm간격으로 두께를 측정하였고 A verage slope와 Profile length라는 개념을 도입하여 수치 적으로 표면 요철을 정 량화 하였다. Average slope는 1mm 간격으로 이동하였을 때 높이의 편차를 평균하는 값이다. 또 한 Video eam을 이용하여 표면 요철의 형태를 촬영하여 시각적으로 판단할 수 있도록 하였다. 위의 측정 방법으로 국내, 외 12개의 Sample에 대해 Profile length와 Average s slope를 계산하였다. 고객의 주관적 평가를 의사결정 방법 중 하나인 AHP법을 이용하여 주관적인 정성 평가를 수치적으로 정량화할 수 있었으며 실제 측정 결과와 비교, 상관분석을 실시 하 였다. 고객의 평가 결과와 Profile length, average slope의 상관성을 분석한 결과 A Average slope에서 유의성 있는 상관성을 얻을 수 있었고 표면 사진을 비교하였을 때 C Coating 방식 등을 유추할 수 있었다. 이러한 평가 방법을 현장에 적용하였으며 그 결과, 공정 개선 전, 후의 표변을 측정, 개선 유무를 쉽게 판단할 수 있었다.

• Journal of Korean Foot and Ankle Society
• /
• v.20 no.4
• /
• pp.158-162
• /
• 2016

Purpose: To evaluate the radiological and clinical effects of early weightbearing after distal reverse oblique osteotomy of bunionette. Materials and Methods: Between 2009 and 2015, 52 patients who underwent surgical treatment at our hospital for bunionette deformity with a minimum follow up of one year were included in the study. Postoperatively, foot cast was applied and full weightbearing was permitted in 28 patients. And short leg splint was applied with only partial weightbearing using crutches allowed in 24 patients. Clinical scores were evaluated. Radiologically, the 4th~5th intermetatarsal angle (IMA), and 5th metatarsophalangeal angle (MPA) were analyzed preoperatively and at the final follow up visit. Results: The visual analogue scale and American Orthopaedic Foot and Ankle Society scores improved in the partial weightbearing group and full weightbearing group, but without significant differences. The average 4th~5th IMA and average 5th MPA correction also did not showed significant differences between the partial weightbearing group and full weightbearing group. Moreover, the full weightbearing group did not encourage non-union rate compared with the partial weightbearing group. Conclusion: Effective bone union may be achieved through early weightbearing, resulting in better clinical outcomes. It is considered that early weightbearing did not have any effect on the changes of IMA and bone union.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.227-239
• /
• 2019

Heavy snowfall events frequently occur in the Gangwon province, and the snowfall amount significantly varies in space due to the complex terrain and topographical modulation of precipitation. Understanding the spatial characteristics of heavy snowfall and its prediction is particularly challenging during snowfall events in the easterly winds. The easterly wind produces a significantly different atmospheric condition. Hence, it brings different precipitation characteristics. In this study, we have investigated the microphysical characteristics of snowfall in the windward and leeward sides of the Taebaek mountain range in the easterly condition. The two snowfall events are selected in the easterly, and the snow particles size distributions (SSD) are observed in the four sites (two windward and two leeward sites) by the PARSIVEL distrometers. We compared the characteristic parameters of SSDs that come from leeward sites to that of windward sites. The results show that SSDs of windward sites have a relatively wide distribution with many small snow particles compared to those of leeward sites. This characteristic is clearly shown by the larger characteristic number concentration and characteristic diameter in the windward sites. Snowfall rate and ice water content of windward also are larger than those of leeward sites. The results indicate that a new generation of snowfall particles is dominant in the windward sites which is likely due to the orographic lifting. In addition, the windward sites show heavy aggregation particles by nearby zero ground temperature that is likely driven by the wet and warm condition near the ocean.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.487-501
• /
• 2016

This study aims to establish basic data of operating status for ecological learning facilities in Korea, investigate their characteristics for operating methods, and present proposals for the efficient operation and management of ecological learning facilities. For this purpose, a list of ecological learning facilities in Korea was established and 50 facilities were surveyed about the current status regarding the operation and management. Based on the survey, operation form, interpreter and volunteer, visitor, budget and revenue, promotion method, and other items were analyzed. Concerning the operating forms, most of the facilities were direct-operated facilities by government, and they are operating mainly by officials. Visitors are mostly families on weekends, while kindergarten children are main visitors during weekdays. Most facilities have higher proportion of visitors nationwide, and they get information mainly from websites operated by facilities and related organization. The annual operating budget and revenue depend on the facility size and operating forms, and the direct-operated facilities by government use higher budget compared to commission-operated ones. For the efficient operation of ecological learning, expert with specialized knowledge should participate in the operation, and intuitive and informative websites should be established and continually managed. In addition, it is necessary to support revenue of by national and local governments and to secure external funding network like local companies and donation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.131-142
• /
• 2017

This study aims to create a Local Climate Zone(LCZ) map of Seoul by using World Urban Database and Access Portal Tools(WUDAPT) protocol, and to analyze the characteristics of the Seoul LCZs. For this purpose, training samples of 17 LCZ types were collected by using Landsat images and Google Earth. LCZ Classification and Filtering were performed by SAGA GIS. An ArcGIS was used to analyze the characteristics of each LCZ type. The characteristics of the LCZ types were analyzed by focusing on building surface fraction ratio, impervious surface fraction ratio, pervious surface fraction ratio, building stories and air temperature. The results show that one filtering was found to be most appropriate. While Yangcheongu and Yeongdeungpogu with the higher annual and maximum mean air temperature than other areas have the higher rate of LCZ 3(compact low-rise) and LCZ 4(open high-rise), Jongnogu, Eunpyeonggu, Nowongu and Gwanakgu with the lower value have the higher rate of LCZ A(Dence trees). The values of building surface fraction ratio, impervious surface fraction ratio and building stories of each LCZ were included in the range of WUDAPT for most LCZs. However, the values of pervious surface fraction ratio were out of the range, in particular, in the LCZs 4~6 and 9~10. This study shows the usability and applicability of the WUDAPT methodology and its climate zone classification used in many countries as a basic data for the landscape planning and policy to improve the thermal environment in urban areas.