• Title/Summary/Keyword: 길이 임계화

Search Result 50, Processing Time 0.023 seconds

Adaptive Segment-length Thresholding for Map Contour Extraction (등고선 추출을 위한 적응적 길이 임계화)

  • 박천주;오명관;전병민
    • The Journal of the Korea Contents Association
    • /
    • v.3 no.4
    • /
    • pp.23-28
    • /
    • 2003
  • This paper describes, in order to extract contour from topographic map image, an adaptive segment-length thresholding using a threshold depended on target image. First of all, after recognizing the primary symbols and detecting two edges from the projection histogram of the elevation value area, the threshold value is determined by the distance between the edges. Then, the subdivision is peformed by searching a branch point and erasing its neighboring Hack pixels. And contour components are extracted by segment-length thresholding. The experimental result shows that the final image contains non-contour component of 2.41% and contour one of 97.59%.

  • PDF

Electromigration Characteristics in Al-1%Si hin Film Interconnections for Microelectronic Devices (극소전자 디바이스를 위한 Al-1%Si 박막배선에서의 electromigration 특성)

  • 박영식;김진영
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1995.06a
    • /
    • pp.48-49
    • /
    • 1995
  • 전자소자의 축소화에 따라 electromigration은 점차 반도체 디바이스의 주요 결함 원 인으로 부각되고 있다. 본 실험은 현재 배선 재료로 널리 사용되고 있는 Al-1%Si 금속박막 배선의 electromigration에 대한 온도 및 배선길이 의존성에 관하여 연구하였다. ppLCC(pplastic Leaded Chipp Carrier) ppackage된 ppSG(8000$\AA$)/SiO2(1000$\AA$)/Al-1%Si(7000 $\AA$)/SiO2(5000$\AA$)/pp-typpe Si(100)의 보호막처리된 시편과 Al-1%Si/SiO2(5000$\AA$)/pp-typpe Si(100)의 보호막처리되지 않은 시편등을 standard pphotolithograpphy 공정을 이용하여 각각 제작하였다. 선폭 3$mu extrm{m}$, 길이 100, 400, 800, 1600$\mu\textrm{m}$의 등의 Al-1%Si 박막배선구조를 사용하 였다. 가속화실험을 위해 인가된 D.C 전류밀도는 4.5$\times$106A/cm2이었고 실온에서 10$0^{\circ}C$까지 의 분위기 온도에서 electromigration를 실행하였다. 박막배선길이에 따른 MTF(Mean Time-to-Failure)는 임계길이 이상에서 포화되는 경향을 보이며 임계길이는 Al-1%Si 박막 배선에서 분위기온도에 따라 길이 400$\mu\textrm{m}$과 800$\mu\textrm{m}$범위에서 나타났다. 각 시편에서 electromigration에 대한 활성화에너지도 MTF의 특성과 유사하게 임계길이 이상에서 포화 되는 특성을 타나내었다.

  • PDF

Electromigration Characteristics in AI-1%Si Thin Film Interconnections for Microelectronic Devices (극소전자 디바이스를 위한 AI-1%Si 박막배선에서의 Electromigration 특성)

  • 박영식;김진영
    • Journal of the Korean Vacuum Society
    • /
    • v.4 no.3
    • /
    • pp.327-333
    • /
    • 1995
  • 전자소자의 축소화에 따라 박막배선에서의 electromigration은 점차 극소전자 디바이스의 주요 결함원인으로 부각되고 있다. 본 실험에서는 현재 박막 배선 재료로 가장 널리 사용되고 있는 AI-1%Si 금속박막배선의 electromigration에 대한 온도 및 배선길이의 의존성에 관하여 연구하였다. PSG($8000AA$)/SiO2(1000$\AA$)/AI-1%Si(7000$\AA$)/SiO2(5000$\AA$)/p-Si(100)의 보호막처리되지 않은 시편 등을 standard photolithography 공정을 이용하여 각각 제작하였다. 선폭 3$\mu$m, 길이 100, 400, 800, $\1600mu$m등의 AI-1%Si 배막배선구조를 사용하였다. 가속화실험을 위해 인가된 d.c.전류밀도는 4.5X106A/$ extrm{cm}^2$이었고 실온에서 $100^{\circ}C$까지의 분위기 온도에서 electromigration test를 진행하였다. 박막배선의 길에에 따른 MTF(Mean-Time-to-Failure)는 임계길이 이상에서 포화되는 경향을 보이며 이는 보호막층의 유무에 관계없이 나타난다. 선폭 $3\mu$m인 AI-1%Si 박막배선에서 임계길이는, 보호막처리된 시편은 $800\mu$m, 보호막처리되지 않은 시편은 $400\mu$m 배선길이에서 나타난다. 이러한 포화의 경향은 낮은 온도에서 더욱 명확해지는 특성을 보인다. 각 시편에서 electromigration에 대한 활성화에너지도 MTF의 특성과 유사하게 임계길이 이상에서 포화되는 특성을 보인다.

  • PDF

Extraction of Optimal Interest Points for Shape-based Image Classification (모양 기반 이미지 분류를 위한 최적의 우세점 추출)

  • 조성택;엄기현
    • Journal of KIISE:Databases
    • /
    • v.30 no.4
    • /
    • pp.362-371
    • /
    • 2003
  • In this paper, we propose an optimal interest point extraction method to support shape-base image classification and indexing for image database by applying a dynamic threshold that reflects the characteristics of the shape contour. The threshold is determined dynamically by comparing the contour length ratio of the original shape and the approximated polygon while the algorithm is running. Because our algorithm considers the characteristics of the shape contour, it can minimize the number of interest points. For n points of the contour, the proposed algorithm has O(nlogn) computational cost on an average to extract the number of m optimal interest points. Experiments were performed on the 70 synthetic shapes of 7 different contour types and 1100 fish shapes. It shows the average optimization ratio up to 0.92 and has 14% improvement, compared to the fixed threshold method. The shape features extracted from our proposed method can be used for shape-based image classification, indexing, and similarity search via normalization.

A Cartographic Generalization for Correcting Spatial Errors of Linear Features (지도제작에 따른 선형사상의 공간적 오류 개선을 위한 일반화)

  • Kim, Nam Shin
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.7 no.1
    • /
    • pp.39-51
    • /
    • 2004
  • This study aims to suggest new algorithm, named as Simoo, in order to improve spatial conflicts and vector displacement between linear features in generalization of the linear features. Main principles of Simoo algorithm is adoption of simplification and smoothening methods. Tolerance conditions used in Simoo are perpendicular length, external angle, and average vertex length. Main characteristics of Simoo are the application of scale, cartographic refinement, minimization of logical errors, and maintenance of geographical properties. The Simoo was applied through comparison to existing Douglas-Peucker algorithm. Resultantly, maintenance ratios of line such as coastal line and stream network were over 97% in both algorithms. The elimination ratio of vertex points may be more effective in Douglas-Peucker than in Simoo. Spatial conflicts between linear features may be more minimized in Simoo. The curvature and smoothening of lines become decreased in scale in application of Simoo. Finally, Simoo algorithm may be more effective than Douglas-Peucker for cartographic generalization.

  • PDF

JPEG Image Quantization Method with Variable Thresholds (가변 임계값을 갖는 JPEG 영상의 양자화 방법)

  • 윤석현
    • Journal of the Korea Society of Computer and Information
    • /
    • v.8 no.2
    • /
    • pp.24-30
    • /
    • 2003
  • In this Paper VTQM(Variable Threshold quantization Method) is proposed, which enhances PSNR by composing the advantages of round-off and truncation quantization methods. From vast experiments, PSNR's of JPEG images with the method are compared with that of standard JPEG methods. At the boundary which affects the compression ratio, VTQM quantizes with a new threshold to reduce the length of compressed data; otherwise, VTQM employs the round-off quantization method to preserve the original image information. As a result, VTQM reduces bit rate while preserving the image quality. The experimental results show that VTQM enhances PSNR by 0.2∼0.3dB, 0.4∼0.5dB with the same bit rate than those of the traditional truncation and round-off quantization methods, respectively.

  • PDF

Progression of Atherosclerosis After Angioplasty (혈관 성형술후 동맥경화의 재발생)

  • Kwon, Hyuck-Moon;Lee, Byoung-Kwon;Suh, Sang-Ho;Roh, Hyung-Woon;Kim, Gye-Young;Lee, Na-Young
    • 순환기질환의공학회:학술대회논문집
    • /
    • 2005.12a
    • /
    • pp.25-26
    • /
    • 2005
  • 동맥경화의 재발생 위치는 속도와 전단응력 등과 같은 혈류역학의 인자들의 영향을 많이 받는 혈관형태를 가진 영역이다. 이러한 결과는 관상동맥에 동맥경화의 발생빈도를 조사한 결과와 일치하고 있으며, 즉 좌전 하행지, 회선지, 및 우관동맥 등의 동맥경화성 병변 발생빈도에서 좌전하행지가 가장 많은 빈도를 나타낸다. 따라서 동맥경화의 발생 및 재형성은 혈관의 동맥경화성 위험지역의 형태적 특징, 즉, 분지부의 위치, 길이, 각도의 변화 등에 따라 달라질 수 있음을 시사한다. 동일한 관상동맥이더라도 동맥경화의 발생이 용이한 형태가 있는데, 혈관의 형태학적 특성에 따란 혈류역학적 특성이 달라지고 동맥경화가 발생할 수 있는 가능성이나 진행과정이 차이가 날 수 있음을 말한다. 특히 임계치를 넘는 고전단응력은 혈관내피세포를 파괴하거나 손상을 주며, 반대로 임계치 미만의 저전단응력은 혈류의 정체시간을 길게 하여 양쪽 모두 동맥경화성 생물학적 반응을 유발 할 수 있며, 고전단응력과 저전단응력의 빈번한 맥동성 변화작용으로 혈관이 손상될 수 있는 한계범위를 넘어서게 될 때 내피세포의 방어체계를 파괴시키거나 혈관성형술후의 신내포세포 형성과정에서 생물학적 활성반응을 촉진하게 되는 환경을 제공하게 되어 동맥경화를 촉진한다고 할 수 있다. 즉 임계치 이상의 고전단응력이 나타나는 형태와 입구경계조건이 발생되면 내피세포 손상에 따른 혈전 현상의 발생가능성이 높아지며, 임계치 미만의 저전단응력이 발생되면 동맥경화성 죽상반 재형성에 영향을 미치게 한다. 결론적으로 동맥경화의 재발생의 기전은 변형된 혈관의 형태학적인 차이와 위치에 따라 서로 다른 혈류역학적 유발할 수 있는 물리적 환경을 제공하는 데에서 출발한다고 할 수 있다.$8.0{\sim}8.3$으로 알카리 쪽으로 이동하였다. 파일롯트 규모로 본 고정화 효소 충전탑(내경 30cm, 높이 85cm)에 의한 이성화당의 생산을 시도하였던바, 고정화 효소(350 IXIU/ml-R) 1리터가 30일동안에 약 293리터의 이성화당을 생산할 수 있는 것으로 나타났다.l plane에서 선수군(選手群)이 $62.7{\pm}7.36^{\circ}$로서 비선수군(非選手群)과 별(別) 차이(差異)가 없었고, horizontalplane에서는 선수군(選手群)이 $-23.5{\pm}7.2^{\circ}$로서 비선수군(非選手群)의 $-38.8{\pm}8.2^{\circ}$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後) 양군(兩群) 모두 유의(有意)하게 높았다. QRS vector 길이에서 Frontal plane에서 선수군(選手群)이 $13.86{\pm}1.44\;mm$로서 비선수군(非選手群)의 $9.62{\pm}0.97\;mm$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後)에도 유의(有意)하게 높았다. Horizontal plane에서도 선수군(選手群)이 $19.82{\pm}2.10\;mm$로서 비선수군(非選手群)의 $16.90{\pm}1.39\;mm$에 비(比)해 유의(有意)하게 높았고 운동후(運動後)에도 선수군(選手群)이 유의(有意)하게 높았다. 이상(以上)을 종합(綜合)해 보면 선수군(選手群)의 R파고(波高)가 비선수군(非選手群)에 비(比)해 운동후(運動後) 계속(繼續) 유의(有意)하게 높았고, $Rv_5$

  • PDF

A Study on Flow Characteristics of Developing Laminar Pulsating Flows in a Square Duct (정4각단면덕트 입구영역에서 층류맥동유동 유동특성에 관한 연구)

  • 박길문
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.15 no.5
    • /
    • pp.1683-1696
    • /
    • 1991
  • 본 연구에서는 정4각단면덕트 입구영역에서 층류맥동유동(laminar pulsating flows)의 유동특성을 이론 및 실험적으로 규명하기 위하여, 이론적 방법으로 덕트 입 구영역에서의 층류맥동유동에 대한 운동량방정식을 유도한 후 비선형인 대류항을 선형 화 시켜서 라플라스변환으로 속도분포식의 해를 구하였고, 실험적인 방법으로는 시험 덕트 크기는 횡단면의 가로*세로가 40mm*40mm이고, 길이가 4000mm인 정4각단면덕트 입구영역에서 송풍기에 의한 공기흡입유동으로 층류진동유동을 발생하며 이들 두유동 을 합성시켜 발생한 층류맥동유동에 대하여 열선유속계의 열선신호로부터 얻어진 속도 파형을 고찰하여 덕트내의 맥동유동에 대한 임계레이놀즈수를 결정하고 속도분포를 측 정하였다. 그리고 이론적으로 얻어진 속도분포식과 열선유속계로 측정한 속도분포를 비교검토하여 정확성을 검증하고, 이들 해석결과로 부터 층류맥동유동의 입구길이(en- trance lenght)식을 결정하여 제안하였다.

CEM-PF: Cost-Effective Mobility Management Scheme Based on Pointer Forwarding in Proxy Mobile IPv6 Networks (프록시 모바일 IPv6 네트워크에서 포인터 포워딩에 기반한 비용효과적인 이동성관리 기법)

  • Park, Seung-Yoon;Jeong, Jong-Pil
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.12 no.4
    • /
    • pp.81-93
    • /
    • 2012
  • We propose efficient mobility management schemes based on pointer forwarding for Proxy Mobile IPv6 Networks(PMIPv6) with the objective to reduce the overall network traffic incurred by mobility management and packet delivery. The proposed schemes are per-user-based, i.e., the optimal threshold of the forwarding chain length that minimizes the overall network traffic is dynamically determined for each individual mobile user, based on the user's specific mobility and service patterns. We demonstrate that there exists an optimal threshold of the forwarding chain length, given a set of parameters characterizing the specific mobility and service patterns of a mobile user. We also demonstrate that our schemes yield significantly better performance than schemes that apply a static threshold to all mobile users. A comparative analysis shows that our pointer forwarding schemes outperform routing-based mobility management protocols for PMIPv6.