• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1976-1982
• /
• 2012

Compressor is one of the most widely employed component in fluid machinery system. It takes tremendous efforts to improve compressor efficiency which affects the coefficient of performance of air-conditioning and refrigeration systems directly. Among various types of compressor, scroll-type compressor is commonly prevalent one with its high compression capability despite relatively small size and weight. Numerous experimental studies have been done to develop for the scroll-type compressor; however, computational models to evaluate the compressor performance or efficiency are not much available in the course of compressor designing process. In this study, a computational model was developed on the basis of geometrical theory using 1-D commercial software AMESim. A simulation study was carried out using the model, and the simulation result was validated with analytical data. This research is expected to provide a viable tool for developing and optimizing a scroll-type compressor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1457-1467
• /
• 2015

Depending on the type of Tx-Rx pairs, VHF Data Exchange System (VDES) for maritime communication is expected to employ the different frequency channels. Load imbalance between the different channels turns out to be a critical problem for the multi-hop communication using Ad-hoc Self-Organizing TDMA (ASO-TDMA) MAC protocol, which has been proposed to provide the connectivity between land station and remote ship stations. In order to handle the inter-channel load imbalance problem, we consider a model of the stochastic geomety in this paper. After analyzing the spatial reuse efficiency in each hop region by the given model, we show that the resource utility can be maximized by balancing the inter-channel traffic load with optimal resource allocation in each hop region.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.32-40
• /
• 2004

This Study was conducted to predict temperature profile of Jangjorim (boiled beef in soy sauce) food during retorting using the commercial NISA (Numerical Integrated Elements for System Analysis) program. NISA program is a good tool to simulate the temperature profile of a specific material based upon the finite element method. The cold point of Jangjorim food located not at the geometrical center but at 26.9 mm backward in y plane because specific heat of soy sauce was 20% higher than that of boiled beef. The effects of heat transfer coefficients on heat transfer during retorting process of Jangjorim were analyzed by response surface methodology (RSM). Independent variables were thermal conductivity of soy sauce, thermal conductivity of boiled beef, and convection heat transfer coefficient and dependent variables were temperature error and lethality error. Thermal conductivity of soy sauce was the most significant contributor among those (P<0.01).

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.387-394
• /
• 2010

The theoretical calculations for $B_nH_n$, $B_nH_{n+1}$, $B_nH_{n+2}$ (n = 3-6) have been considered at the B3LYP level of theory with the 6-311G$^*$ basis set. The optimized geometries, harmonic vibrational frequencies, and binding energies are evaluated to elucidate the thermodynamic stability and spectroscopic properties. The harmonic vibrational frequencies for the molecules considered in this study show all real numbers implying true minima and the binding energies are corrected using zero-point vibrational energies (ZPVE). The binding energies and average energies due to increasing of BH monomer are predicted.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.5-9
• /
• 2011

There are technical difficulties in measuring the numerical apertures of multi-mode gradient-index plastic optical fibers (GI-POFs) due to their strong speckle noise originating from dopants, non-uniformity of gradient-index profile, and multi-mode interference. Therefore, we propose a new method of obtaining the numerical aperture by controlling the size of the incident laser beam and measuring the numerical aperture of GI-POF. The results show that we can get a value for the numerical aperture of GI-POF very similar to that measured by the conventional method. We can also obtain the optimum launching condition of input beam and maximum coupling efficiency.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.142-149
• /
• 1997

This paper applied one of the well-known optimal control theory, namely, linear quadratic regulator(LQR), to the station-keeping maneuvers(SKM) for a geostationary satellite. The boundary conditions to transfer the system with a good accuracy at a terminal time were based upon the predicted orbital data which are created due to the Earth's non-uniform mass distribution's effect during 14 days and due to luni-solar effect during 28 days. Through the linearization of the nonlinear system equation with respect to reference orbit and the numerical integration of Riccati equation, the optimal trajectories and the corresponding control law have been obtained by using LQR. From the comparison of ${\Delta}V$ obtained by LQR with the ${\Delta}V$ obtained anatically by geometric method, Station Keeping Maneuvers(SKM) via LQR may provide comparable results to a real system. Furthermore it will demonstrate the possibility in fuel optimization and life extension of geostationary satellite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.866-869
• /
• 2015

With the advance in semiconductor technology, the number of elements that can be integrated in system-on-chip(SoC) increases exponentially, and thus voltage scaling is indispensable to enhance energy efficiency. Near-threshold voltage computing(NTC) improves the energy efficiency by an order of degree, hence it is able to overcome the limitation of conventional super-threshold voltage computing(STC). Although NTC-based low performance manycore system can be used to maximize energy efficiency, it demands more number of cores to sustain the performance, which results in considerable increase of area. In this paper, we analyze NTC manycore architecture considering the trade-offs between performance, power, and area. Therefore, we propose an algorithmic methodology that can optimize power consumption and area while satisfying the required performance by determining the constrained number of cores and size of caches and clusters in NTC environment. Experimental results show that proposed NTC architecture can reduce power consumption by approximately 16.5 % while maintaining the performance of STC core under area constraint.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.285-292
• /
• 2007

This study was developed the metallic plate for fixation in the femur fracture for the orthopedic region and rigid fixation with plates has a firm place in fracture treatment. Most plates can be used for rigid as well as biological and dynamical fracture fixation. The device's designation and sizing has a specific with bending structural stiffness and strength, known meaning that is reliable regardless of the plate by the short type and long type. Short plate have a wrapping of femur and long plate have to preserve a pole of femur. The bending strength of the curved metallic long plate has to evaluate a 11,000N and The bending strength of the curved metallic short plate has to evaluate a 6,525N. The tensile stress through to press a plate is $1573N/m^2\;and\;1539N/m^2$. The device can be used to support Revision case of Hip Implant and to use a case of Hip screw compression of Hip Neck Fracture.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.197-202
• /
• 2019

In line with the era of the 4th Industrial Revolution, 5G technology has become common technology, and 5G technology is evaluated as a technology that minimizes the speed and response speed compared to 4G using technologies such as network slicing and ultra-multiple access. 5G NR stands for 5G mobile communication standard, and network slicing cuts the network into parallel connections to optimize the network. In addition, the risk of hacking is increasing as data is processed in the base station unit. In addition, since the number of accessible devices per unit area increases exponentially, there is a possibility of base station attack after hacking a large number of devices in the unit area. To solve this problem, this study proposes the introduction of quantum cryptography and 5G security standardization.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.17-21
• /
• 2017

Horizontal thin-film thermoelectric cooler has been simulated using a commercial software (ANSYS Workbench Thermal-electric). The thermoelectric cooler consists of thin-film n-type $Bi_2Te_3$, p-type $Sb_2Te_3$ thermoelectric elements, and Au electrode, respectively. The hot spot was placed under the center of device which represents Joule heating. Numerical analysis was conducted by geometric variable, and a maximum temperature difference of $13^{\circ}C$ was obtained. As from the simulation parameters, we presented an optimized design for high efficiency cooling.