• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.426-432
• /
• 2017

An experimental and numerical study on shock attenuation in a solid by a subminiature flyer impact was conducted to determine the performance of a subminiature exploding foil initiator such as, flyer velocity and impulse loading. The obtained attenuation pattern shows the possibility to determine the critical flyer velocity for initiating the miniaturized pyrotechnic unit by figuring out shock intensity and duration according to flight characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1111-1117
• /
• 1999

In order to measure the temperature of bridge wire, the explosive material is removed from EED and a fiber optic temperature sensor is installed near the bridge wire. Using the heat transfer theory, the optimum position of the fiber optic sensor in the EED is determined and the temperature-distance equation is derived from test result. The measuring technique can be utilized to the real electromagnetic radiation hazard test.

• 월간 기계설비
• /
• s.317
• /
• pp.40-52
• /
• 2016

동대구역 복합환승센터는 교통과 상업시설이 복합 개발되는 국내 첫 프로젝트로서 KTX, 도시철도, 고속 시외버스 등 모든 대중교통을 한곳에서 갈아탈 수 있는 원스톱 환승체계 구축은 물론 쇼핑, 문화, 컨벤션, 테마파크 등 복합문화 시설이 융합된 대구 경북지역의 랜드마크다. 12월 15일 동대구역 신세계백화점 오픈과 함께 준공 예정인 동대구역 복합환승센터는 동남권의 신교통 중심지이자 지역사회 활성화 등 새로운 미래를 여는 기폭제라는 의미에서 대구 시민뿐만 아니라 전국에서도 관심을 모으고 있다. 이 복합환승센터가 완공되면 직접고용 6천여명에 간접고용 포함 1만8천여개의 일자리 창출에 기여할 것으로 전망돼 대구시 전체 경제에 미치는 영향은 생산유발효과 2조4천억원, 부가가치 유발효과 4조2천억원에 달할 것으로 기대된다. 150여개의 백화점과 이마트의 풍부한 시공 노하우로 미래를 선도하는 신세계건설이 종합시공을, 쾌적한 환경 조성으로 삶의 질 향상에 적극 앞장서는 (주)우진아이엔에스(대표 홍평우 손광근)가 주요 기계설비를 시공하고 있다. 본지는 백화점 오픈 및 복합환승센터 준공을 위해 마무리작업에 박차를 가하고 있는 신세계건설 문길남 상무(현장소장)와 이종국 기계설비 부장, (주)우진아이엔에스 전명규 현장소장을 만났다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.1-9
• /
• 2022

This study introduces the calculation model of ionization composition and electrical conductivity for metallic plasma for practical application to modeling and simulation of modern electrical detonators. The present model includes the correction for non-ideality of dense plasma conditions which are expected in electrical explosion of bridge in detonators. The computational results for copper plasma show favorable agreement with experimental data for a wide range of plasma temperature and high density conditions and the model is proper for detonator modeling with good prediction accuracy.

• Explosives and Blasting
• /
• v.18 no.4
• /
• pp.61-68
• /
• 2000

본 기사는 2000년 3월 26일 미국 시애틀 소재 Kingdome 체육관 시설을 발파해체공법을 이용하여 해체한 사례로서 The Journal of Explosives Engineering(v.17 n.5, 2000)에 기고한 Dr. Douglas A. Anderson (Senior Consultant, West Chester, PA office of Schnabel Engineering Associates, Inc.)의 글을 옮긴 것이다. Kingdome 구조물의 해체와 해제 후 Seahawk Stadium 건설의 책임을 맡은 주계약자는 Turner Construction 회사이며 발파해체 사전준비 및 사후처리의 택일은 Aman Environment사, 발파해체 설계 및 시공은 CDI사, 주위 주요 구조물에 대한 영향평가 및 진동계측은 Schnabel Engineering Associates사가 맡아 수행하였다. 이 건물은 세계에서 가장 큰 규모의 쉘 콘크리트 돔 구조로 되어 있으며, 주위에 주요 구조물들이 위치하고 있고 특히 이 지역에 과거 발생했던 지진으로 인하여 주민들이 지반진동에 대한 피해나 또는 지진을 유발하수도 있다는 위험 가능성에 매우 예민하여 관심이 높았던 해체사례이다. 이 구조물을 한번에 붕괴시킬 경우 지반에 25,000톤의 중량이 충격으로 작용할 수 있으므로 충격을 최소화하기 위한 방법에 초점을 맞추어 설계되었으며 5,905개의 천공에 4,728파운드(약 2,145kg)의 폭약이 사용되었고 도폭선을 이용하여 기폭시켰다. 사용된 도폭선의 길이는 약 37.9 Km에 달하였다. 발파해체 기사에 나타나 있듯이 주위에 피해를 주지 않고 성공적으로 수행되었다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.81-92
• /
• 2013

The satellite includes many release mechanisms such as solar array deployment, antenna deployment, cover to protect contamination in scientific equipment, pyro value of the propulsion subsytem, and bypass device in Li-Ion cell module. A drive the initiators is a critical to the successful mission because the initiators of release mechanism driving by the pyrotechnic circuit is operated in single short. The pyrotechnic circuit has to provide switching network for safety. A typical switching network has defect consisting of high current rating fire switch to handle switching transient current during fire the initiator. The pyrotechnic circuit is required some form of power conditioning to reduce the peak power demanded from the bus if the initiators are to be fired from the main bus. This paper design a pyrotechnic circuit synchronized to the fire-command to activate the fire switch to overcome use high current rating fire switch to handle switching transient current during fire the initiator. The pyrotechnic circuit provides a current limited widow pulse for fire current synchronized to the fire-command to insure that fire switch will only carry the current but never switch it. The current limited widow pulse for fire current can be possible to use low current rating and light mass switch in switching network. The current limit function in the pyrotechnic circuit reduces supply voltage to initiator and provides the effect of power conditioning function to reduce peak bus power. The pyrotechnic circuit to apply satellite development on geostationary orbit is verified the function by test in development model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.700-707
• /
• 2016

Recently, ammunition malfunctions of the 40mm grenade were reported during live fire training. When 72 40mm grenades were fired by the army, 11 duds were encountered. The dud ammunition rate was approximately 15%. Because ammunition is used a long time after its manufacture, it is necessary to ensure its performance after long-term storage. In this study, we attempted to decrease the dud ammunition rate of 40mm grenade (K200) fuzes through quality improvement. First, it was determined by the detonator performance test that abnormal explosions occurred due to the degradation of the detonator as a result of its aging characteristics. Second, we improved the fuze quality of the 40mm grenade. Third, we tested its shelf life to estimate its life expectancy. The shelf life of the 40mm grenade fuze obtained using the Arrhenius equation was 6.5 years for the existing grenade fuze and 45.5 years for the improved grenade fuze. This showed that the shelf life of the improved grenade was increased approximately 7 times. Therefore, the improved 40mm grenade fuze contributes to the quality improvement of the 40mm grenade by decreasing the dud ammunition rate during long term storage.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.187-195
• /
• 2007

China has been the hub of business in Asia' and has developed infra-system and development policy on harbor and logistics. Investment on development of Sanghai port and fang river has been increasing. This development has put importance on logistics in East Asia Additionally, port surrounding of China has been activated Therefore, This paper is going to suggest three measures. First, shipping corporation of Korea will provide different services and network according to the growth of China logistics. Secondly, Korea is to invest with Chinese companies around fang river to freight service industry. Thirdly, it is to construct Yellow sea Rim transport network by Sanghai port and fang river development.

• Composites Research
• /
• v.18 no.6
• /
• pp.34-39
• /
• 2005

In this study, we analyzed the relation between physical/mechanical properties and ballistic properties for several engineering ceramics that were expected to use as armor material. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles. Increasing Young's modulus/density, hardness/density and flexural strength/density ratios, ballistic properties were generally increased. Especially it appeared that the ballistic property about KE projectile was lineally increased, as HEL/density ratio increased.

• Composites Research
• /
• v.18 no.6
• /
• pp.40-47
• /
• 2005

In this study, we tried to invent ceramic armor material with brilliant ballistic properties by the silica of the high compression-expansion ratio and based on alumina that has the most economical and higher ballistic efficiency. After we choose three compositions, proper sintering temperature for each composition was decided. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles. As a result, $46\%\;Al_2O_3\;-\;51\%\;SiO_2$ of three compositions had the highest ballistic efficiency md better properties than alumina.