• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.73-84
• /
• 2003

In this study, the economic pile design procedure using the proof test results was proposed. In order to improve the inappropriate pile design routine, the proof test for 6 pile cases were performed and the construction saving effect were analyzed. The saving rate of construction cost with the small diameter piles and the large diameter drilled shafts were 34 - 47 and 0 - 55 %, respectively.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.16-23
• /
• 1994

본 고에서는 형상최적설계에 대한 기초이론이 소개되었다. 재료도함수와 변분법 및 보조변수법에 기초한 형상설계민감도해석 절차는 까다로우며 함수론 등 많은 수학적인 배경을 필요로 한다. 설계민감도가 구해지면 이 정보를 필요로 하는 최적화 알고리즘을 사용하여 형상에 대한 최적해를 구할 수 있으며 그 과정은 재래식 최적설계시와 같다. 구조물 형상최적설게에 있어 형상(영역)변화의 효과는 대부분 경계에서 수직이동의 형태로 나타난다. 따라서 경계면에서 변위나 응력값 등에 대한 정확한 수치해는 성공적인 형상최적화의 중요한 관건이 된다. 따라서 구조해석을 위한 정확한 유한요소해석방법과 형상함수 그리고 경계를 나타내는 적절한 함수들을 지속적으로 개선할 필요가 있다. 반복설계과정 중에서 영역과 경계가 계속 바뀌므로 설계민감도 수치해의 정확도를 높이기 위해 경계요소법과 유한요소법에 기초를 둔 영역법 등을 사용하기도 한다.

• 건축구조
• /
• v.13 no.1
• /
• pp.46-58
• /
• 2006

구조동력학 이론에 기초하여 내진설계 기술이 개발되었다. 그러므로 건축물의 내진설계를 근본적으로 이해하기 위해서는 구조동력학의 여러 가지 이론들을 먼저 알고 이들이 내진설계에 어떻게 적용이 되는지를 알아야 한다. 이 글은 구조기술자 여러분이 건축물의 내진설계를 이해하는데 도움이 될 수 있도록 하기 위하여 다음과 같이 3부로연재될예정이다. 제1부: 응답스펙트럼과구조물의동적해석 제2부: 등가정적해석법과반응수정계수의배경 제3부: 능력스펙트럼법에의한비탄성해석 제1부에서는 단자유도 구조물의 지진해석을 통하여 응답스펙트럼을 작성하는 원리와 이를 이용하여 간편하게 지진해석을 수행하는 방법을 소개하고 응답스펙트럼에 근거하여 설계응답스펙트럼을 작성하는 방법과 다자유도 구조물의 지진응답을 알아내기 위한 응답 스펙트럼 해석법에 관하여 소개한다. 제2부에서는 구조동력학 이론에 근거하여 등가정적해석법이 유도된 근거와 반응수정계수를 사용하게 되는 배경을 소개하여 구조기술자들이내진설계에좀더확실한이해를할수있도록할것이다. 마지막으로 제3부에서는 비탄성해석을 좀 더 쉽게 하기 위하여 사용되는 능력스펙트럼법의 배경과 이를 이용하여 건축물의 성능점을 찾는 방법과 구조물의 비탄성 지진응답을 평가하는 방법에 대하여 소개함으로써 성능에 기초한 내진설계를 위한 기초 이론을 확실히 이해할수있도록할것이다. 구조동력학에 관한 내용을 여기에 상세히 소개하자면 엄청난 분량이 될 것이므로 여기서는 이 글을 읽는 구조기술자들이 구조동력학에 관한 기초적인 내용을 이해하고 있는 것으로 가정하기로 한다. 그러므로 구조동력학에 대한 기초적 이론을 확실히 이해하고 있지 못한분들은이글을읽기전에먼저구조동력학에관한알기쉬운서적을 먼저 읽도록 추천한다.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.6
• /
• pp.5-11
• /
• 2015

Recently the necessity of developing the Load and Resistance Factor Design (LRFD) for shallow foundation has been raised to implement to the domestic design codes related to geotechnical engineering since the limit state design is requested as international technical standard for the foundation of structures. In this study, applicability of LRFD for shallow foundation on weathered soils was investigated and resistance factor for this case was proposed. The quantitative analyses on the uncertainty and resistance bias for shallow foundation on weathered soil ground were performed by collecting the statistical data about domestic case studies for design and construction of shallow foundation. Reliability analyses for shallow foundation were first performed using FDA (First-order Design value Approach) method. Resistance factors were calibrated using the load factors obtained from the specifications of shallow foundations on weathered soil ground. The influence of the load factors developed in this study on the resistance factors were discussed by comparing with the resistance factor obtained from using AASHTO load factors.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.5-14
• /
• 2004

The settlement of foundations under working load conditions is an important design consideration. Well-designed foundations induce stress-strain states in the soil that are neither in the linear elastic range nor in the range usually associated with perfect plasticity. Thus, in order to accurately predict working settlements, analyses that are more realistic than simple elastic analyses are required. The settlements of footings in sand are often estimated based on the results of in-situ tests, particularly the standard penetration test (SPT) and the cone penetration test (CPT). In this paper, we analyze the load-settlement response of vertically loaded footings placed in sands using both the finite element method with a non-linear stress-strain model and the conventional elastic approach. Based on these analyses, we propose a procedure for the estimation of footing settlement in sands based on CPT results.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.47-58
• /
• 2014

This study explores methods for modeling the foundation-seabed interaction needed for the load analysis of an offshore wind energy system. It comprises the comparison study of foundation design load analyses for NREL 5 MW turbine according to various soil-foundation interaction models by conducting the load analysis with GH-Bladed, analysis software for offshore wind energy systems. Furthermore, the results of the aforementioned load analysis were applied to foundation analysis software called L-Pile to conduct a safety review of the foundation cross-section design. Differences in the cross-section of a monopile foundation were observed based on the results of the fixed model, winkler spring and coupled spring models, and the analysis of design load cases, including DLC 1.3, DLC 6.1a, and DLC 6.2a. Consequently, under all design load conditions, the diameter and thickness of the monopile foundation cross-section were found to be 7 m and 80 mm, respectively, using the fixed and coupled spring models; the results of the analysis conducted using the winkler spring model showed that the diameter and thickness of the monopile foundation cross-section were 5 m and 60 mm, respectively. The study found that the soil-foundation interaction modeling method had a significant impact on the load analysis results, which determined the cross-section of a foundation. Based on this study, it is anticipated that designing an offshore wind energy system foundation taking the above impact into account would reduce the possibility of a conservative or unconservative design of the foundation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.846-847
• /
• 2008

본 논문에서는 유한요소법을 이용한 전력용 변압기의 기초 설계에 대하여 다루고자 한다. 전력용 변압기 설계 및 해석을 위해 원하는 사양의 전력용 변압기 치수결정이 선행되어야 한다. 본 논문에서는 전력용 변압기의 치수결정을 위해 장하분배법을 기반으로 하는 기초 설계 프로그램를 제작하였다. 설계 프로그램을 이용해 결정한 치수에 의해 전력용 변압기를 모델링 하였고, 유한요소법을 이용하여 자계해석을 하였다. 유한요소해석에 의한 각 사양별 전력용 변압기의 자기적 특성값과 장하분배법에 의한 기초 설계 계산값을 비교.검토하였다.

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.30-38
• /
• 1993

본문에서는 기계진동에 대한 말뚝기초의 설계에 대하여 간략하게 기술하였으며 본문에 기술된 방법들은 여러 가정들을 통하여 얻어진 것으로 경우에 따라서는 실제 거동과는 매우 상이한 거동을 예측할 수 있으므로 실제 설계에 이용되는 경우, 특히 주어진 지반의 물성치 선택 등에 주의를 요할 필요가 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.95-101
• /
• 2009

As buildings increase in height, lifting plans are becoming increasingly important on construction sites. As a critical piece of load-lifting equipment, the tower crane deserves a well thought-out stability review, since it has a significant impact and is very vulnerable to structural safety disaster. To ensure the structural stability of a tower crane, its lateral support or pile supported foundation designs must include consideration for stability, and pile foundation must be used if site conditions prevent soil from providing the required bearing capacity, or prevent the foundation from being increased to the required extent. Pile supported foundation design requires thorough and systematic review, as more stability parameters need to be considered than with an independent foundation. This paper intends to develop an optimal design algorithm that can minimize associated costs while ensuring the fundamental stability of pile supported foundation design, limiting the scope of research to fixed-type trolley tower cranes using pile supported foundations. The findings herein on pile foundation stability review parameters, process and optimal design are expected to improve the operational efficiency of staff concerned, and reduce the time and efforts required for pile foundation design.

• Journal of Engineering Education Research
• /
• v.14 no.5
• /
• pp.3-9
• /
• 2011

This study analyzes results of current Basic Design Engineering teaching and learning methods and makes suggestions based on its findings. To reach these conclusions, participants were 112 second-year students in Basic Design Engineering courses. In the results of t-test, there were significant statistics in learners' satisfaction, achievement of course outcomes and grades. Also the average of factors of the problem based learning strategy is higher than those of the project based strategy. Based on this study's findings, recommendations for effective teaching and learning strategies are made for Basic Design Engineering courses.