• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.6
• /
• pp.479-484
• /
• 2009

The effect of anode gas channel height on gas diffusion and cell performance in a 100 $cm^2$ class molten carbonate single cell is investigated. Single cell separators with three different channel height are used. The effect of the gas channel height on the distribution of the reactive gas concentration is evaluated by the two-dimensional concentration diffusion equation. The overpotential caused by concentration drop with different channel height is estimated by the voltage decay related to diffusion of reactants, well known as concentration polarization, using limiting current density. The estimation could have the possibility to identify the reactant mass transfer polarization in the complicate factors of the overall electrodes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.219-219
• /
• 2011

공정용 유도 결합 플라즈마(ICP)에서 강자성체인 페라이트를 이용하여 제작한 발룬 변압기(balun transformer)를 사용하여 플라즈마 밀도를 높이는 실험을 수행하였다. 실험에서는 2개의 발룬 변압기를 이중구조 안테나에 설치하여 실제 인가되는 전압이 접지전위 대비＋V에서 ${\pm}$V/2로 변환되도록 구성하였다. 20~100 mTorr 압력 범위의 아르곤 기체 50 sccm에 30~70 W범위의 전력을 인가하여 반응용기의 중앙과 벽면에서 부유 탐침법을 적용하여 플라즈마 밀도를 측정 하였다. 같은 압력과 같은 전력에서 발룬 변압기를 사용했을 때와 회로에서 변압기만 제거한 실험을 비교하면 반응용기 중앙에서 플라즈마 밀도가 평균 10% 증가함을 보였다. 이는 안테나에 발란스 된 전압이 인가되면 플라즈마 균일도가 증가하고 부유전위(floating potential) 대비 플라즈마 전위(plasma potential)가 낮아져서 이온에 의한 손실이 줄어들어 전자가 더 많은 에너지를 흡수해서 나타나는 현상이다. 특히 E-mode에서 H-mode로 전환되면 플라즈마 밀도가 크게 증가함을 보였고, 반응용기 벽면에서는 발룬 변압기를 사용했을 때 밀도가 낮다가 H-mode로 전환 시 비교실험 대비 밀도가 크게 증가함을 볼 수 있었다.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.45-52
• /
• 1995

In influence of the vapor phase turbulent stress (i.e., the too-phase Reynolds stress) to the characteristics of two-phase system in a horizontal pipe has been theoretically investigated. The average two-fluid model has been constituted with closure relations for stratified flow in a horizontal pipe. A vapor phase turbulent stress model for the regular interface geometry has been included. It is found that the second order waves propagate in opposite direction with almost the same speed in the moving frame of reference of the liquid phase velocity. Using the well-posedness limit of the two-phase system, the dispersed-stratified How regime boundary has been modeled. Two-phase Froude number has been found to be a convenient parameter in quantifying the onset of slugging as a function of the global void fraction. The influence of the taper phase turbulent stress was found to stabilize the flow stratification.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.56-62
• /
• 2008

Characteristics of heat transfer were investigated in a three-phase swirling fluidized bed whose diameter was 0.102 m and 2.5 m in height. Effects of gas and liquid velocities, particle size and liquid swirling ratio ($R_S$) on the immersed heater-to-bed overall heat transfer coefficient were examined. The heat transfer characteristics between the immersed heater and the bed was well analyzed by means of phase space portraits and Kolmogorov entropy(K) of the time series of temperature difference fluctuations. The phase space portraits of temperature difference fluctuations became stable and periodic and the value of Kolmogorov entropy tended to decrease with increasing the value of liquid swirling ratio from 0.1 to 0.4. The value of Kolmogorov entropy exhibited its minimum with increasing liquid swirling ratio. The value of overall heat transfer coefficient (h) showed its maximum with the variation of liquid velocity, bed porosity or liquid swirling ratio, but it increased with increasing gas velocity and particle size. The value of K exhibited its maximum at the liquid velocity at which the h value attained its maximum. The overall heat transfer coefficient and Kolmogorov entropy were well correlated in terms of dimensionless groups and operating variables.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.139-146
• /
• 2014

Sodium borohydride ($NaBH_4$) is considered as a secure metal hydride for hydrogen storage and supply. In this study, the interfacial friction of two-phase flow in the dehydrogenation of aqueous $NaBH_4$ solution in a microchannel with a hydraulic diameter of $461{\mu}m$ is investigated for designing a dehydrogenation chemical reactor flow passage. Because hydrogen gas is generated by the hydrolysis of $NaBH_4$ in the presence of a ruthenium catalyst, two different flow phases (aqueous $NaBH_4$ solution and hydrogen gas) exist in the channel. For experimental studies, a microchannel was fabricated on a silicon wafer substrate, and 100-nm ruthenium catalyst was deposited on three sides of the channel surface. A bubbly flow pattern was observed. The experimental results indicate that the two-phase multiplier increases linearly with the void fraction, which depends on the initial concentration, reaction rate, and flow residence time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.27-38
• /
• 2009

The multi-level profile system is designed to measure the vertical profile of $H_2O$ and $CO_2$ concentrations in the surface layer to estimate the storage effects within the plant canopy. It is suitable for long-term experiments and can be used also in advection studies for estimating the spatial variability and vertical gradients in concentration. It enables the user to calculate vertical fluxes of water vapor, $CO_2$ and other trace gases using the surface layer similarity theory and to infer their sources or sinks. The profile system described in this report includes the following components: sampling system, calibration and flow control system, closed path infrared gas analyzer(IRGA), vacuum pump and a datalogger. The sampling system draws air from 8 inlets into the IRGA in a sequence, so that for 80 seconds air from all levels is measured. The calibration system, controlled by the datalogger, compensates for any deviations in the calibration of the IRGA by using gas sources with known concentrations. The datalogger switches the corresponding valves, measures the linearized voltages from the IRGA, calculates the concentrations for each monitoring level, performs statistical analysis and stores the final data. All critical components are mounted in an environmental enclosure and can operate with little maintenance over long periods of time. This report, as a practical manual, is designed to provide helpful information for those who are interested in using profile system to measure evapotranspiration and net ecosystem exchanges in complex terrain.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.499-505
• /
• 1996

The facillities for Kimchi preservation were investigated in order to develop the taste, flavor and commercial quality of Kimchi during fermentation. Four kinds of facillities used for this experiment were PP(Polypropylene). PSC(Polypropylene+ceramic)and PPP was selected newly and laminated of three layers with PETG (Polyester G), PS (Polystyrene) and PETG. The change of total number of lactic acid Bacteria, pH, acidity, color, gas contents and free internal volume of package were measured for the Kimchi packaged by 4 facillities during 6 days fermentation at 15$^{\circ}C$. The total No. of lactic acid Bacteria within the Kimchi in the PPP facillity was more and remained longer time (120 hrs.) than other Kimchi in the PP, PS and PPC facillities. Also the pH of all Kimchi were decreased to pH 4 within 72 hrs. and the pH of Kimchi in the PPP facillity was kept as pH 4 for 120 hrs., so that was shown to be decreased more dully than others. In case of fimchi in the PPP facillity, the color was retained better, CO$_2$ contents was lower similar to PPC facillity, and swelling degree of free internal volume was higher than others. By the sensory evaluation, the Kimchi in the PPP facillity represented as better than others for color, flavor, texture and total preferences until 48 hrs. fermentation. And the PPP facillity is transparent, so these will be selected and confirmed more easily, also PPP facillity is so hard to endure the swelling pressure of internal gas. Therefore it is thought that the PPP facillity used as Kimchi package will be desirable for better taste, flavor, and commercial quality.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.207-220
• /
• 2012

There are around 7,500 manure tanks to treat the manures from pigs in Korea. In the tank, there are too much sediments deposited on the base and wall, which causes low efficiency of stock capacity and manure fermentation. In order to minimize sediments and to ferment manure effectively, we developed a 2-fluid jet mixer for mixing sediments in liquid livestock manure tank. For developing the prototype, we tested a factorial experimental system with various nozzles, and simulated CFD models with two kinds of nozzle arrangement. From the results of factorial experiment and CFD simulation, we concluded the dia. ratio of primary : secondary nozzle should be 1:2 and the nozzles should be arranged at the same distances toward to the circumferential direction. With this results, we manufactured a 2-fluid jet mixer which is consists of four 2-phase nozzles, centrifugal slurry pump and root's type air blower. And, we carried out the performance test of the prototype in the round shaped liquid manure tank in the farm. The performance test results showed that the uniformity of TS (Total Solid) and VS (Volatile Solid) was raised from 21.3 g/L, 13.3 g/L In steady state to TS and VS to 23.0 g/L, 14.1 g/L in the mixing operation. Therefore, we could conclude that the prototype of 2-fluid mixer could make the solid material which could be sediments in the tank not to be deposited in the tank and to be contacted to air bubbles which could enhance the efficiency of the fermentation of livestock manure.