• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.211-215
• /
• 1992

보간기(Interpolator)는 NC 공작기계에서 공구의 궤적 및 이송속도를 제어하는 주요한 요소이다. 보간기는 보간계산 과 펄스의 발생을 전자회로로서 행하는 하드웨어 보간기와 컴퓨터 프로그램으로 수행하는 소프트웨어 보간기로 나눌 수 있는데 하드웨어 보간기는 고속보간이 가능하지만, 유연성이 부족한 단점이 있기 때문에 CNC 화 뒤로는 그 의존도가 점점 낮아지고 있다. 본 연구에서는 더 광범위한 기준펄스 보간기의 특성을 조사하기 위하여 DDA, SPD(Smooth Pulse Distribution), SFG(Saita Function Generator) 방식의 직선, 원호, 타원보간 성능을 알고리즘의 처리속도, 경로오차의 측면에서 비교, 분석하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.62-69
• /
• 1996

Interpolator is a very important element in NC machines in that it controls tool path and speed. In this paper, studied were extensive interpolation characteristics of reference pulse method among various interpolation and pulse generation methods. Specifically, processing speed and path error of DDA, SPD and SFG methods were compared and analyzed against line, circle and elipse. As a result, in the point of processing speed, SPD method was found to be the best for line interpolation, SFG method for circle and ellipse, and DDA method was found to be the slowest for all paths. In the point of path error, DDA method was found to have the biggest error for all kinds of paths.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.45-54
• /
• 2005

The purpose of this research is to find a simple and accurate NURBS interpolator for CNC systems such as robot, CMM and CNC machine tools. This paper presents a new design of NURBS interpolator for CNC system. The proposed algorithm used the recursive characteristics of NURBS equation, the previous incremental value and chord length for the sake of a constant chord length. Simulation study was conducted to see the performance of the proposed interpolator with reference-word and reference-pulse method. Consequently, an accurate and simple NURBS interpolator was possible for modem CNC systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1032-1035
• /
• 2000

Increasing demands on precision machining with computerized numerical control (CNC) machines have necessitated that the tool to move not only position error as small as possible, but also with smoothly varying feedrates in space. This paper presents a new high precision interpolation algorithm for 3-dimensional (3D) Non-Uniform Rational B-Spline (NURBS) curve in the reference-pulse CNC technique. Based on the minimum path error strategy, real-time NURBS interpolator was developed in software and this was implemented with a PC-NC milling machine. The several experimental results have shown that the proposed NURBS interpolator is useful for the high precision machining of complex shapes. It is expected that this algorithm can be applied to the CNC machines for the machining of 3D free-form surfaces.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.115-120
• /
• 2000

Increasing demands on precision machining of free-form surface have necessitated that the tool to move not only position error as small as possible, but also with smoothly varying feedrates. This paper presents new algorithm for high precision 3D(3-dimensional) NURBS(Non-Uniform Rational B-Spline) interpolation in the reference-pulse technique. Based o the minimum path error strategy, interpolation algorithm was designed to follow the NURBS curve. Using this algorithm a real-time 3D NURBS interpolator was developed in software. The algorithm implemented in a PC showed promising results in interpolation error and speed performance. It is expected that this can be applied to the CNC systems for the high precision machining of complex shapes.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.99-105
• /
• 1996

Increasing demands on precision machining of free-form surfaces have necessitated the tool to move not only with position error as small as possible, but also with smoothly varying feedrates. In this paper, linear, circular and spline interpolators were developed in reference-pulse type using PC. M-SAM and M-DAM were designed by the comparison and analysis of previous interpolation methods. Spline interpolator was designed to follow the free-form curves. To apply to the real cutting process, constant feedrate compensation and acceleration-deceleration compensation were conceived. Finally, its performance was tested using retrofitted milling machine. As a result, new interpolation algorithm is favorable in precision machining of free-form curves.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.89-94
• /
• 2002

Increasing demands on precision machining using CNC machines have necessitated that the tool to move with a position error as small as possible in 3-dimensional (3D) space. This paper presents the simultaneous 3D machining with a retrofitted PC-NC milling machine. To achieve the simultaneous 3-axis motions, a new precision interpolation algorithm for 3D Non-Uniform Rational B-Spline(NURBS) curve is used. With this accurate and efficient algorithm for the generation of complex. 3D shapes, a real-time NURBS interpolator was developed using a PC and the simultaneous 3D machining is accomplished.

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.60-69
• /
• 1990

Plasma arc cutting is a fusion cutting process in which a gas-constricted arc is employed to produce a high-temperature, high-velocity plasma jet on the workpiece. This process provides some advantages such as increased cutting velocity, excellent working accuracy and the ability to cut special materials (widely used stainless steels and Al-alloys, for example), when compared with iconventional oxyfuel gas cutting. From the view point of price and reliability of the power source, plasma arc cutting has also some distinct advantages over laser beam cutting. High-speed machines with NC or CNC systems are needed for the plasma arc or laser beam cutting process, while for oxyfuel gas cutting, low-speed machines with copying templates or optical-shape tracking sensors can be applied. The low price and high flexibility of the microprocessor arc contributing more and more the application of CNC system in the plasma arc cutting process, as in other manufacturing fields. From these points of view, a microprocessor-based plasma arc cutting system was developed by using a reference-pulse system, and its performance was tested. The interpolating routines were programmed in the assembly language for saving the memory volume and improving the compouting speed, which has an intimate relationship with the available cutting velocity.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.172-178
• /
• 1999

3D linear and circular interpolations are a basic part for the machining of complex shapes. Until now, because of the absence of appropriate algorithms for the generation of 3D lines and circles, a full accomplishment for available machine tool resolution is difficult. this paper presents new algorithms for 3D linear and circular interpolation in the reference pulse technique. In 3D space, the line or circle is not expressed as an implicit function, it is only defined as the intersection of two surfaces. A 3D line is defined as the intersection of two planes, and a 3D circle is defined as the intersection of a plane and the surface of a sphere. Based on these concepts, interpolation algorithms are designed to follow intersection curves in 3D space, and a real-time 3D linear and circular interpolator was developed in software using a PC. The algorithm implemented in a PC showed promising results in interpolation error and speed performance. It is expected that it can be applied to the next generation computerized numerical control systems for the machining of 3D lines, circles and some other complex shapes.