• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.99-105
• /
• 2014

A reference spur suppressed PLL with two-symmetrical loops without changing the bandwidth which is optimized to suppress phase noise and reduce locking time has been designed. The principle of suppressing a reference signal spur is to stabilize the input voltage of voltage controlled oscillator (VCO). The proposed PLL consists of a phase-frequency detector(PFD) which has two outputs, two charge pumps(CP), two loop filters(LF), a divider and a VCO which has two inputs. Simulation results with $0.18{\mu}m$ CMOS process show that the reference spur is approximately suppressed to 1/2 of the reference spur in a conventional PLL. Even though there is a 5% process variation in the magnitude of R and C, the simulation result shows that the reference spur is still suppressed to 1/2 of the reference spur in a conventional PLL. The power consumption is 6.3mW at the power supply of 1.8V.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1130-1137
• /
• 2009

This paper proposes a new clock routing design for suppressing clock harmonic effects in a Printed Circuit Board (PCB) for a terrestrial Digital Multimedia Broadcasting(DMB) system. Typical crystal reference frequencies that are widely used in DMB tuners are 16.384 MHz, 19.2 MHz, 24.576 MHz. When the high-order harmonic components of these reference frequencies fall near the RF channel frequencies, receiver sensitivity of the tuners is seriously degraded. In this work, we propose a new clock routing design in order to address the clock harmonic coupling issue. The proposed design incorporates two inductors for isolating the clock ground from the main ground, and adopts a new strip line-style routing instead of the conventional microstrip line style routing to minimize the overlap area with the main ground. As a result, the RF sensitivity of the T-DMB tuner is improved by 2 dB.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.109-116
• /
• 2010

In this paper, we propose a method for extracting predominant melody of polyphonic music based on harmonic structure. Since polyphonic music contains multiple sound sources, the process of melody detection consists of extraction of multiple fundamental frequencies and determination of predominant melody using those fundamental frequencies. Harmonic structure is an important feature parameter of monophonic signal that has spectral peaks at the integer multiples of its fundamental frequency. We extract all fundamental frequency candidates contained in the polyphonic signal by verifying the required condition of harmonic structure. Then, we combine those harmonic peaks corresponding to each extracted fundamental frequency and assign a rank to each after calculating its harmonic average energy. We finally run pitch tracking based on the rank of extracted fundamental frequency and continuity of fundamental frequency, and determine the predominant melody. We measure the performance of proposed method using ADC 2004 DB and 100 Korean pop songs in terms of MIREX 2005 evaluation metrics, and pitch accuracy of 90.42% is obtained.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.1-8
• /
• 2012

The only law related to airblast and ground vibration control in Korea is the Noise and Vibration Control Act enforced by the Ministry of Environment. But this law mainly deals with the annoyance aspects of noises and vibrations in ordinary human life. Hence, the law defines the safety criteria of ground vibration as the vibration level (VL) of dB(V) unit. The ground vibrations produced from blasting, however, have the unique characteristics that can be shown in shock vibrations, and the duration is also very short compared to the vibrations from machinery, tools or facilities. Hence, vibration regulations for blasting operations usually define the safety criterion as the peak particle velocity (PPV) considering the effect of ground vibrations to structural damage. Notwithstanding, there are several attempts that predict VL from PPV or estimate VL based on the scaled distances (SD; in unit of $m/kg^{1/2}$ or $m/kg^{1/3}$) without considering their frequency spectra. It appears that these attempts are conducted mainly for the purpose of satisfying the law in blasting contracts. But, in principle there could no correlation between peaks of velocity and acceleration over entire frequency spectrum. Therefore, such correlations or estimations should be conducted only for the waves with the same or very similar frequency spectra.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.991-997
• /
• 2013

A new frequency tuning scheme and a transconductor with a wide tuning range and low harmonic distortion is presented. This frequency tuning technique is based on the relationship between the time-constant and the elapsed times in charging a capacitor up to a certain level. Its structure is as simple as that of a conventional tuning scheme using a VCF(Voltage-Controlled Filter) and it does not need a pure sine wave but uses a CLK(Clock) pulse as a reference signal, which is easily obtained from on-chip system clocks or external X-tal oscillators. When a certain reference CLK is given, without complex capacitor arrays the pole frequency of the filter can be controlled continuously in the frequency domain. Simulation results are presented to confirm the operation of the proposed approach.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1163-1171
• /
• 2007

In this paper, the design techniques required to design heterodyned OPLL such as frequency-phase deference detector, loop filter and phase noise of semiconductor laser are presented. Through the experiments with the calculated parameters, we confirmed that the frequency-phase difference detector simply develops an error component that is proportional to the frequency-phase difference between heterodyned optical signals. The achieved frequency-phase locking range of the input laser diode frequency is around ${\pm}150MHz$. This paper describes the details of the designed as well as experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1707-1714
• /
• 2016

This paper presents the effect of spectrum sharing/overlapping in a heterogeneous OFDM system with nonlinear High Power Amplifier (HPA). According to the spectrum sharing strategies, the achievable rate performances are analyzed. In the non-orthogonal spectrum sharing, we address how the portion of the overlapped or overlaid spectrum band and the nonlinear properties of HPA affect the system performance and accordingly, propose the optimized spectrum sharing strategies.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3185-3193
• /
• 1998

ATM망은 망 내부의 큐잉 랜덤 지연에 의한 CDV의 발생으로 클럭복원의 문제를 안고 있다. 큐잉에 의한 지연은 여러 가지 파라메터에 의해 좌우되며 특히 망의 부하와 트래픽이 전송되는 교환기의 수에 의해 크게 좌우된다. CBR 트래픽의 경우 이를 해결하기 위해 SAR 헤더에 송신부의 클럭 정보를 담아 보내고 수신부에서는 이 정보를 바탕으로 송신부의 클럭을 복원하는 SRTS 기법을 사용하고 있다. 그러나 실시간성을 요하는 VBR 트래픽은 CBR과는 달리 대역폭의 가변적인 성질을 가지고 있으며 그 변화가 다양하여 SRTS 기법을 그대로 적용하기 곤란하다. VBR의 경우에 CBR 전송을 위한 SRTS 기법을 그대로 적용하면 주파수의 가변성으로 인해 망 클럭 주파수에 비해 매우 낮은 주파수의 경우에는 사이클이 상대적으로 많아 정보의 정확성이 떨어지게 된다. 이를 방지하기 위해 서비스 클럭의 주파수가 낮은 경우에는 망 기준 주파수를 낮게 하므로써 정확성을 증가시킬 수 있다. 또한, VBR 트래픽의 경우 AAL1에서는 SRTS의 필요성이 강조되지 않으나 단지 CDV를 제거할 방법이 요구되어진다. 따라서 AAL1의 SRTS를 CDV의 측정을 위한 메카니즘으로 바꾸는 것이 필요하며, 각 기반으로하여 Wavelet 변환을 이용한 VBR 트래픽의 클럭 복원방식을 제안한다. 제안된 알고리즘은 ATM망에서 VBR 영상 서비스를 위한 AAL 계층에 이용이 가능하다. 시뮬레이션 결과는 wavelet 변환 블록에서 출력되는 계수 값을 선택하여 전송함으로써 VBR 트래픽의 보다 다양한 QoS를 만족시킬 수 있음을 보인다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.1029-1039
• /
• 1992

This paper presents the filtering method which is processed on the frequency domain among Hangul character recognition methods. It is processed the Hangul character parrern with spatial positioning modulation and mapped the Hangul character element which have spatial position variant feature onto frequency domain, at this time, normalized spatial position and so normalized the character size in frequency domain. And it is grouped the Hangul character element according to the generating position and set the standard pattern, and used each standard character element pattern with character element filter and filtering the character pattern of Hangul character, it is derived the normalized cross correlation function and the coherence function led to the filtering results, and calculated classification threshold.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.300-301
• /
• 2007

본 논문에서는 실시간 스펙트럼 추정기에 기반하여 시간-주파수 영역 반사파 계측 시스템에서의 동축케이블 결함을 검출하는 방법을 제안한다. 시간-주파수 영역 반사파 계측 시스템은 가우시안 포락선(Gaussian Envelop)모양의 첩 신호를 기준신호로 하여 도선에 반사파를 분석하는 기법으로써 타 방법에 비하여 높은 정확도를 자랑하는 것으로 알려져 있다. 하지만 결함 위치를 추정하기 위해 Wigner 시간 주파수 분포 함수를 이용하므로 계산량 증가에 따른 실시간 구현이 어렵다는 단점이 있었다. 이러한 단점을 극복하기 위하여 본 논문에서는 LMS 스펙트럼 추정기를 이용한 시간-주파수 영역 반사파 계측 시스템의 구현방법을 새롭게 제안한다. 제안된 기법은 실제 동축케이블에 대한 실험결과를 통하여 그 성능을 입증하도록 한다.