• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2048-2053
• /
• 2011

The aim of this paper is to propose an energy harvesting system by converting mechanical energy of revolving door into electrical energy. The method of energy harvesting system is discussed on two methods: one is the energy-harvester using gear shaft coupling system, and the other is the energy-harvester using spiral spring system. The former is generated by coupling the shaft of rotating door with generator system, while the latter is generated by connecting end-effector of door with the string of generator system. We present the experimental results for two developed energy-harvester. Finally, a comparison between these results is presented to show the validity of energy-harvester.

• Journal of Fashion Business
• /
• v.8 no.2
• /
• pp.116-125
• /
• 2004

In the history of western costume, women's hairstyle and headdress have been fluently studied but men's headgear has not. To study and manufacture headgear designs and details, which indicate varieties in forms and ornaments, can be utilized for the fashion currently in vogue. Purpose: the purpose of the study is to investigate one of the headgear, the hat in terms of shift in design and manufacturing method, and to study through manufacturing in order to do a literature review by era and to provide information as the source in new design. Study method and scope: Like previously manufactured and presented bonnet of women's headdress or headgear, the hat in the study was manufactured on the basis of literature review and portrait analysis. Target era is from the late 16th century to the early 17th century when the hat was used. The hat to be manufactured was selected by investigating the details such as hair style and hat features using literature. The pattern of the selected hat was analyzed, and velvet, silk, and wool were used as the materials as in the literature. Ornaments used similar things as in the photos.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2018

We aimed to develop a high quality 3.5 ton class swing reducer by studying the efficiency improvement of the reducer through the optimum design and performance evaluation of the assembled, high efficiency, lightweight 3.5 ton swing reducer. Based on the optimal design of the worm and worm wheel, the optimal manufacturing method of the worm wheel, the optimized casing design, and the optimum design of the output pinion, Respectively. Therefore, in this paper, to improve the efficiency of the worm gear reducer system, we will develop the manufacturing technology and verify the mass production by combining the manufacturing process design, processing and assembling technology according to the optimization design. We have conducted research to realize mass production by product verification such as product efficiency, reliability and durability according to optimal design of worm gear reducer.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.35-41
• /
• 2012

To control screen door installed in the subway platform, geared BLDC motors have been being used. However, because of the geared mechanisms, the control profile of the screen door in slow speed is very poor. Moreover, geared mechanism tends to leads system malfunctions and low efficiency. To overcome those problems, in this paper, the techniques of developing hi-efficiency direct drive gearless PMAC motor controller and application example to control the screen door of subway platforms are proposed. The developed system has advantages that; the energy efficiency has been increased by adopting gearless PMAC motor; the system break-down factor has been decreased due to the actuator mechanism has been simplified. In this paper, the screen door control system structure, PMAC motor drive circuit design, implementations of vector control algorithm, and test results are shown.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

본 논문에서는 자동차 계기판 지시계 구동용 액츄에이터 연구의 일환으로써 소형 2상 스텝모터에 대하여 유한요소 수치해석을 이용한 설계, 해석 및 One Chip을 이용한 유량, 온도, RPM 및 속도 지시계 동시제어용 전용 구동 IC를 설계하였다. 일반적으로 자동차 계기판에 사용되어지고 있는 지시계의 구동원으로 코일형의 액츄에이터를 사용하고 있으나, 동작구간내의 선형성 및 속응성 저하와 구조상 큰 체적으로 인한 공간확대의 문제가 야기되어지고 있다. 따라서, 본 연구에서는 고 에너지 밀도를 갖는 소형의 영구자석과 저 손실 특성을 갖는 정밀 기어부 설계를 통하여 경량. 박형의 PM형 스텝모터를 설계하였으며. 또한 다수 모델 제어용 전용 드라이버 IC 설계 및 제작을 하였다. 실제로 제작한 모델을 대상으로 특성평가를 행하였으며, 이로부터 높은 선형성 및 고정밀도와 저소음 특성을 갖는 자동차 계기판 지시계용 구동원 및 드라이버의 활용 가능성을 확인 할 수 있었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.914-919
• /
• 2004

When the motor is rotating, the torque and rpm are varying as the loads or the driving status connecting through reduction units are changing. On the contrary, one can monitor the changes of the loads or the driving status in the manner of measuring motor torque and rpm. There is a torque measuring method using the strain gauge and bridge circuit. But, because this is the contact method, it has the life time which is dependent on rotating velocity and used time. So this system demands on replacement of some Parts or whole system itself for maintenance. And this system is also relatively big and expensive, requiring preceding annoying process. In this paper, we are going to suppose non-contact method to measure torque and rpm using the Hall effects sensor For this we have made the planetary geared reduction motor with Hall sensors and with the monitoring system. The monitoring system displays the sensing data(torque, rpm) and calculated data( power) and also has the network capability with Bluetooth protocol. Our solution is much more inexpensive ;md simple method to measure torque and rpm than before.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.647-651
• /
• 2007

Game was begun to sell to multi platform rather than is sold as a title of a kinds of machine since some moment. In case of competition flag species such as PS (Play Station) or XBOX, there is 'Final Fantasy', 'Gear of War' masterpiece. However, title of game was begun to manufacture to multi platform and this is step that much games are manufactured to multi platform by selection of game developers to minimize danger by production cost rise of game. About game character development method in multi platform surrounding that this research is such game character abstract of multi platform and multi platform environment direction for multi platform through analysis and example proposal to basis data for presentation utilize wish to.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.73-74
• /
• 2015

본 논문에서는 인체의 움직임에서 발생하는 낮은 주파수의 진동 에너지를 전기 에너지로 수확하는 전자기유도 현상 기반의 고효율 에너지 하베스터를 제작하였다. 제안된 하베스터는 기어모듈을 이용하여 사람이 인가하는 직선운동을 회전운동으로 바꾸는 방식으로 동작한다. 회전수를 늘리기 위해서 증속기어모듈을 달아 높은 회전비를 갖게 한다. 그리고 발전부의 자석들은 할바흐 배열을 통해 불필요한 곳의 자속을 최소한으로 하고 필요한 곳의 자속은 최대한으로 하여 높은 효율을 낼 수 있게 하였다. 제작된 전자기 에너지 하베스터의 출력전압은 230.9 mV이며 $18{\Omega}$에서 2.96 mW의 최대 피크 전력을 전달한다.

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.225-233
• /
• 1998

The principle, design, and application of a gear-tooth sensor for the rough environmental conditions such as high temperatures of up to $150^{\circ}C$ are studied. The rotation of a tooth wheel is detected by a couple of Hall elements manufactured on the SIMOX wafer by a methode of differential detection using bipolar silicon technology. The product sensitivity of the Hall element is about 510 V/AT over a wide temperature range of $-40^{\circ}C{\sim}150^{\circ}C$. The differential Hall sensor makes the maximum possible distance between sensor and tooth wheel wider than that when single Hall element is used over a wide temperature range, and the maximum detectable distance is 4.5mm at driving current of 4mA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.295-302
• /
• 2014

An internal gear pump is required to improve the flow rate and noise. Furthermore, such pumps are durable and small in size. In this study, equations of the rotor shape with multiple profiles (ellipse 1-involute-ellipse 2) were derived, and relevant performance parameters (pressure angle, irregularity, and specific sliding) of the internal gear pump to noise were predicted and compared. Rotor profiles and performance parameters were obtained by a prediction algorithm for theoretical analysis, and the effects between the design parameters and the performance parameters were analyzed. Based on the analysis results of the effects, an optimal design of the rotor profile was proposed, and a noise test of the prototype was performed to evaluate the reliability of the design.