• Title/Summary/Keyword: 기술적 요소

Search Result 9,639, Processing Time 0.038 seconds

A Design of Management and Verification Tool of Component and A Development of SAM Simulator based on Dynamic Reconfiguration Architecture (컴포넌트 관리 및 검증도구 설계와 동적 재구성 아키텍처 기반 SAM 시뮬레이터 개발)

  • Suk, Jeebeom;Lee, Jaeoh;Lee, Jaejin;Seo, Yoonho
    • Journal of the Korea Society for Simulation
    • /
    • v.22 no.2
    • /
    • pp.1-10
    • /
    • 2013
  • Modeling and simulation techniques construct experimental environment considering battlefields and are able to analyze performance of components of weapon system that closely resemble reality. However, developed model has low scalability and not cared reusability because it has been used only in a limited range of domain. In this paper, we develop a verification tool to verify reusability of developed component for dynamic reconfiguration and to judge scalability of it and a management tool to control data of it effectively. In addition, dynamic reconfiguration architecture of guided weapon systems designed in the previous study has been applied to SAM(Surface to Air Missile) System Simulator, and we study effectiveness of the developed component. Thus the user can configure various guided weapon systems through simulation application of dynamic reconfiguration architecture of component.

A Study on the dose distribution and the accuracy of the system for small fields of high energy x-rays (고에너지 X-선 소조사야의 선량분포 및 계측에 관한 연구)

  • 이호남;지광수;김재휴;지영훈
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.7 no.1
    • /
    • pp.32-44
    • /
    • 1995
  • I. 제 목 고에너지 X-선 소조사야의 선량분포 및 계측에 관한 연구 II. 연구의 목적 및 중요성 최근 수술이 어려운 뇌종양등에 대한 방사선수술법(Radiosurgery)이 관심의 대상이 되고 있다. 방사선수술법은 크게 나누어 200여개의 Co-60이 장착된 장치(Gamma Knife)를 이용하는 방법과, X-선치료기를 이용하는 방법은 몇개의 보조기구를 설치하면 가능한 매우 경제적인 방법이다. 따라서 Microtron을 이용한 방사선수술의 기초자료확보를 위하여 소조사야에 대한 선량과 선량분포의 측정 및 계산을 실시하였다. III. 연구의 내용 및 범위 Microtron으로부터 조사되는 6MV, 10MV, 21MV X-선의 지름 3cm이하 소조사야에 대한 정확한 선량 및 선량분포 자료를 확보하기 위해, 가. Microtron치료기와 보조장치등에 대한 정밀도 계측 및 평가 나. 보조 Collimator의 적당한 크기와 재료의 선택 및 설계, 제작. 다. 에너지와 조사야 크기 각각에 대한 여러측정장치(Ion chamber, Diode detector, TLD 및 Film등)를 이용한 선량 및 선량분포 측정. 라. 측정값들의 비교, 검토 및 측정된 자료에 의한 선량 및 선량분포의 계산을 수행했다. IV. 연구결과 및 활용에 대한 건의 본 연구에서 얻은 결과는 다음과 같다. 가. Microtron치료기와 보조장치등의 정확도의 허용 오차범위내에서 잘 일치하였다. 나. 보조 collimater adpator는 총 길이 24cm로 하였으며 재질로는 두랄미늄을 사용하였고, 보조 collimator는 low melting alloy를 사용하였으며 소조사야 크기의 정확도는 0.5mm이내에서 매우 잘 일치 하였다. 다. 방사선 수술법의 에너지 선택에 중요한 요소중의 하나인 penumbra는 6MV X-선에서 가장 적게 나타났으며 라. 소조사면에 대한 깊이-선량 백분율곡선은 모든 에너지에서 조사면이 작아질수록 표면으로 이동하는 경향을 보였다. 이상의 결과로부터 방사선 수술을 시행할 경우 수십억원에 이르는 장비의 도입이나 새로운 시설 없이 Microtron에서 조사되는 고에너지 X-선을 이용할 수 있을 것으로 사료된다. 또한 새로 구입한 측정기나 보조 Collimator를 이용하여 소조사야에 대한 선량측정기술을 습득함으로써 일반적인 소조사야의 방사선치료나 회전치료등에 활용할 수 있다.

  • PDF

Modeling the Heterogeneous Microstructures of Ti-MMCs in Consolidation Process (강화공정에 따른 비균질 티타늄 금속기 복합재료 모델링)

  • Lee Soo-Yeun;Kim Tae-Won
    • Composites Research
    • /
    • v.18 no.3
    • /
    • pp.21-30
    • /
    • 2005
  • Vacuum hot pressing has been used for the development of titanium metal matrix composites using foil-fiber-foil method. Heterogeneous microstructures prior to and following consolidation have been quantified, and the relations to densification behavior investigated. As shown by the results, dramatic variations of the microstructures including equiaxed $\alpha$, transformed $\beta$ and $ Widmanst\ddot{a}tten$ $\alpha$ are obtained during the process according to the fiber distributions. The dependence of microstructures on the consolidation then has been explained in terms of the change in mechanisms such as grain growth and recrystallization that occur with changing levels of inhomogeneity of deformation. Further, micro-mechanics based constitutive model enabling the evolution of density over time together with the evolutions of microstructure to be predicted has been developed. The mode developed is then implemented into finite element scheme so that practical process simulation has been carried out.

Convergence Study on Durability Improvement due to Radius of Arch Type at CFRP Structure with Stacking Angle (적층각도를 가진 CFRP구조물에서의 아치형 반경에 따른 내구성 개선에 대한 융합 연구)

  • Hwang, Gue-wan;Cho, Jae-ung
    • Journal of the Korea Convergence Society
    • /
    • v.8 no.7
    • /
    • pp.219-224
    • /
    • 2017
  • This paper investigates equivalent stress and deformation happening at inner fiber structure when the tensile force acts on the specimen with arch type composed of carbon fiber. The countless many each fiber is applied on the unidirectional axis at CFRP and has the high specific strength and stiffness by comparing with iron. In this study, the distribution of stress due to radius is investigated at the structure of arch type composed with the optimum stacking angle of $60^{\circ}$. And the durability is seen to be lower as the radius increases at the same stacking angle. By applying the result of this study to the design of structure with arch type, it can be devoted to the safe design for the prevention of damage and the durabilty improvement. And it is possible to be grafted onto the convergence technique at the designed factor and show the esthetic sense.

Performance of 3-Dimensional Frequency Reuse Patterns and Their Application to Carrier-Aggregated Systems (3차원 주파수 재사용 패턴의 성능 및 반송파 결합을 사용하는 시스템으로의 적용 방안)

  • Sung, Jihoon;Sung, Wonjin
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.23 no.11
    • /
    • pp.1256-1263
    • /
    • 2012
  • Assigning different frequency resources among adjacent cells, namely the frequency reuse technique can be utilized to mitigate intercell interference, which is a major cause of performance degradation in cellular systems. Since most of conventional frequency reuse patterns are limited to the two-dimensional environment, the research for the three-dimensional frequency reuse would be beneficial especially for the implementation of femto cells in downtown office buildings. We propose frequency reuse patterns in three-dimensional space and evaluate their performance of each pattern in terms of channel capacity. In particular, we show that the proposed three-dimensional frequency reuse patterns can be applied for carrier-aggregated transmission of LTE-Advanced systems. The performance of the proposed patterns is evaluated using computer simulation.

Seismic performance evaluation of Pier-Shafts system with multi-layered soil (다양한 지반층을 갖는 Pier-Shafts 시스템의 내진성능평가)

  • Jang, Sung-Hwan;Nam, Sang-Hyeok;Song, Ha-Won;Kim, Byung-Chul
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.69-72
    • /
    • 2008
  • The so-called Pier-Shafts system which consists of the continuous column and shaft is often used to support the highway bridge structure because of advantages in easy construction and low cost. In the earthquake region, the Pier-Shafts system undergoes large displacements and represents a nonlinear behavior under the lateral seismic loading. The soil-pile interaction should be considered for more accurate analysis of the Pier-Shafts system. In this study, a transverse response of a reinforced concrete Pier-Shafts system inside multi-layered soil medium is predicted using a finite element program which adopts an elasto-plastic interface model for the interface behavior between the shaft and the soil. Then, seismic analysis is performed to evaluate the performance of Pier-Shafts system under strong ground motion and their results are verified with experimental data.

  • PDF

A Study on the Life History of an Adult Adoptee (성인입양인의 생애사 연구)

  • Kwon, Ji Sung;Choi, Woon Sun;Byun, Mi Hee;Ahn, Jae Jin
    • Korean Journal of Social Welfare
    • /
    • v.65 no.1
    • /
    • pp.83-107
    • /
    • 2013
  • The purpose of this study is to understand the life experiences of an adult adoptee. For this purpose, the data were collected through in-depth interviews with an adult adoptee, observation, and documents and analyzed using life history approach. Results of analysis were composed of summarized life history, thick description of life history, theme analysis, and issues for intervention. The themes generated from analysis are 'a slub', 'a larva that want to be a butterfly', 'I am okay. No, I am not okay', 'because it is not my fault', 'love, the critical determinant leading my life'. Researchers, also, examined intervention issues of adoption, post-adoption service, closed adoption or open adoption, searching root, intervention for adult adoptee. Based on the results of this study, the policies and practical guidelines for adult adoptees were suggested.

  • PDF

Factors Influencing Social Participation in People with Musculoskeletal Conditions - Applying ICF relevant categories - (ICF 관련 범주에 따른 근골격계질환 장애인의 사회참여 관련요인)

  • Shin, Eun Kyoung;Lee, Han Na
    • Korean Journal of Social Welfare
    • /
    • v.65 no.1
    • /
    • pp.5-31
    • /
    • 2013
  • The principle objective of this study is to determine factors affecting social participation for physically disabled people with musculoskeletal conditions (spinal cord injury, muscular dystrophy, osteogenesis imperfecta, rheumatoid arthritis) in South Korea using ICF relevant categories of the international classification index by WHO. The subjects of this study 352 people with physical disabilities, the data were collected using ICF component(body functions, body structures, activities and participation and environmental factors) and the relevant categories deprived from ICF core sets. The collected data were evaluated with descriptive analysis, ANOVA, correlation analysis, and multiple regression analysis. The results of this study can be summarized as follow. The mental function, Neuromusculoskeletal and movement-related functions, Genitourinary and reproductive functions, Skin and related structures, Learning and applying knowledge, General tasks and demands, and Mobility positively influenced social participation in people with musculoskeletal conditions. However individual factors and environmental factors didn't statistically significant affect on social participation. The implications of the study is to examine by ICF components of universal approach on disability study and utilized the relevant ICF categories as measurement tools.

  • PDF

Behavior of a Geosynthetic Reinforced Two-tier Segmental Retaining Wall on a Yielding Foundation (압축성이 큰 지반 위에 시공되는 계단형 블록식 보강토 옹벽의 거동)

  • Yoo Chung-Sik;Jeon Han-Yong
    • Journal of the Korean Geotechnical Society
    • /
    • v.21 no.7
    • /
    • pp.21-29
    • /
    • 2005
  • This paper presents the results of a numerical investigation on the behavior of a geosynthetic reinforced two-tier segmental retaining wall (GR-SRW) on a yielding foundation. A hypothetical 10 m high two tier GR-SRW to be constructed on an incompetent foundation containing a layer of relative soft soil deposit was considered. A verified finite-element procedure was employed to get insights into the effect of foundation yielding on the wall behavior including the wall deformation and the reinforcement load. It is shown that the effect of foundation yielding is to increase the wall deformation as well as the reinforcement load, thus influencing both the internal as well as the external stability of the wall. Practical implications of the findings obtained from this study are highlighted in this paper.

A Study about Early Detection Techniques of Cyber Threats Based Honey-Net (허니넷 기반의 사이버위협 조기탐지기법 연구)

  • Lee, Dong-Hwi;Lee, Sang-Ho;J. Kim, Kui-Nam
    • Convergence Security Journal
    • /
    • v.5 no.4
    • /
    • pp.67-72
    • /
    • 2005
  • The exponential increase of malicious and criminal activities in cyber space is posing serious threat which could destabilize the foundation of modern information society. In particular, unexpected network paralysis or break-down created by the spread of malicious traffic could cause confusion and disorder in a nationwide scale, and unless effective countermeasures against such unexpected attacks are formulated in time, this could develop into a catastrophic condition. In order to solve a same problem, this paper researched early detection techniques for only early warning of cyber threats with separate way the detection due to and existing security equipment from the large network. It researched the cyber example alert system which applies the module of based honeynet from the actual large network and this technique against the malignant traffic how many probably it will be able to dispose effectively from large network.

  • PDF