• Spatial Information Research
• /
• v.21 no.4
• /
• pp.63-70
• /
• 2013

With the increasing use of high-performance mobile devices such as smartphones, users have been able to connect to the Internet anywhere, anytime, so that Location Based Services(LBSes) have been popular among the users in order to obtain personalized information associated with their locations. The services have advanced to provide the information realistically and intuitively by adopting Augmented Reality(AR) technology, where the technology utilizes various sensors embedded in the mobile devices. However, the services have inherent problems due to the small screen size of the mobile devices and the complexity of the real world environment. Overlapping contents on a small screen and user's possible movement should be taken into consideration in displaying the icons on objects that block user's environment such as trees and buildings. The problems mainly happen when the services use only user's location and sensor data to calculate the position of the displayed information. In order to solve the problems, this paper proposes a method that applies street data extracted from a digital map. The method uses the street data as well as the location and direction data to determine contents that are placed on both sides of a virtual street which augments the real street. With scrolling the virtual street, which means a virtual movement, some information far away from the location of the user can be identified without user's actual movement. Also the proposed method is implemented for region "Aenigol", and the efficiency and usefulness of the method is verified.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.71-77
• /
• 2020

Recently, the tracking radar has confirmed the necessity of developing a small tracking radar that can be operated without various restrictions in various environments. In addition, the performance of a small tracking radar requires equal to or higher than the existing tracking radar. Such a small tracking radar can be implemented through miniaturization and low power of existing tracking radar. In this paper, the role and function of a signal processor for a small tracking radar are defined and we proposed a method to increase the efficiency of power consumption and miniaturization by minimizing the use of devices required to implement a signal processor for a small tracking radar. Used as a method for miniaturization, a device processor such as DDC and communication controller was implemented in an FPGA to design a signal processor for a small tracking radar. In addition, a low-power signal processor was designed by a power supply using a highly efficient switching regulator. Finally, the signal processor was verified by the performance test of the signal processor for the small tracking radar implemented, the Doppler tracking test using the signal processor on the small tracking radar, and the distance tracking test.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.8-15
• /
• 2001

This paper remarks IETF based requirements for IP/UDP/RTP header compression issued in 3GPP2 All IP Ad Hoc Meeting and protocol stacks of the next generation mobile station. All IP Network, for real time application such as Voice over IP (VoIP) multimedia services based on 3GPP2 3G cdma2000. Frames for various protocols expected in the All IP network Mobile Station (MS) are explained with several figures including the bit-for-bit notation of header format based on IETF draft of Robust Header Compression Working Group (ROHC). Especially, this paper includes problems of IS-707 Radio Link Protocol (RLP) for header compression which will be expected to modify in All IP network MS's medium access layer to accommodate real time packet data service[1]. And also, since PPP has also many problems in header compression and mobility aspects in MS protocol stacks for 3G cdma2000 packet data network based on Mobile IP (PN-4286)[2], we introduce the problem of solution for header compression of PPP. Finally. we suggest the guidelines for All IP network MS header compression about expected protocol stacks, radio resource efficiency and performance.

• Journal of the Economic Geographical Society of Korea
• /
• v.3 no.2
• /
• pp.5-22
• /
• 2000

Manufacturing industry in Chonbuk region has experienced relatively consistent increase during period 1975-1999. The importance of labor-intensive sectors such as textiles and clothing, wood and furniture, and food and drink, which had been traditionally major sectors in this region, has declined over the same period. On the other hand, the shares of more complex sectors like automobile, chemistry, communication equipment, and other machinery have gone up. The structural change of Chonbuk manufacturing industry, with increasing diversity, follows the national trend of industrial development, based on national industrial policies. but the speed and level of the change has been slow and low in terms of the national standard of manufacturing development, especially with the weak development of high technology industry. In Chonbuk, the spatial distribution of manufacturing industry has shown a high degree of concentration. Although spatial concentration is apparent in the central area including the cities of Chonju, Iksan, and Kunsan, new tendency towards industrial decentralization within this area has been found. The tendency means manufacturing development at the fringe of this area. There is another tendency towards industrial dispersion into the cities of Kimje and Jeongup close to this central area. The spatial dispersion of manufacturing industry has been accelerated in the form of increasing external investment. But despite the tendency of the spatial dispersion, the development of manufacturing industry in the rest of the region still remains a marked inferiority.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.97-104
• /
• 2007

Recently, the demand of the large span structures has been increasing. The large span structures include such a large scaled structures such as: the shell structure, the space frame structure, the membrane structure and the cable structure, etc. The large span structures are supposed to be confirmed and issued carefully at the initial process of the design besides the construction engineering aspects because of the structural specific cause that should solve and accomodate those large and wide space without columns. In the field of the large span structure construction, the erection construction method has been regarded as a major affected aspects on the construction cost, construction term, and stability. In the field of the large span structure construction, there are various construction method and system could be applied depends on the condition of the construction site and other circumstances such a major construction method as: the element method, the block method, the sliding method, the lift-up method and complexed method, etc. In this study, as the case study of the erection construction method of the large span structures, after survey and study that those existing large span structures construction cases which had applied and adopted the election construction method and analysis and classify into the Uoups by the size, span, ceiling height, structural system in odor to supply and suggest the data for the enhancement and development in the field of the erection construction method as a efficient structural solution of the large span structure construction.

• Journal of the Korean Geographical Society
• /
• v.36 no.5
• /
• pp.578-592
• /
• 2001

Based on a survey sample of farm households in three provinces of Korea, this article reports the perspectives of fuel-time farmers regarding trade liberalization, its effects on their lives, and the future of small-scale farming. While the agricultural sector is being transformed under neoliberal policies, farmers, with life or no preparation for a global market order, are forced to modernize their farming operations. The findings from the survey indicate that farmers accede to terms of global integration in principle while disapproving state rural policies in practice. The survey data also confirm that intra-regional differences in farmers'perceived satisfaction with living conditions, government farm policies, and socio-economic/labor issues. Disparities in the degree of discontent with government policies and socio-economic well-being are explicit between the relatively diversified region of Kyonggi Province and the farming-dependent regions of Chunbuk and Kyongbuk Provinces. The overall findings uphold that most farmers who have not been fully exposed to free market mechanisms are confronted by increased uncertainties and economic hardships. The findings propound that agricultural/rural policies need to reflect long-term, macroeconomic changes, and regionally/locally-based agricultural structure.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.115-129
• /
• 2007

The purpose of this study is to review the trends of education researches on the housing in Korea and Japan. It was based on the Journal of Korean Home Economics Education and Journal of the Japan Association of Home Economics Education. For the inquiry, 49 articles(20 from Korea and 29 from Japan) were collected from 1989 to 2006. The results of this study are as follows: First, the number of the articles of housing education was not quantitatively enough compared to the other fields in Korean and Japan. Second, regarding research fields, there were lots of articles about 'the perception of housing education' and 'teaching-learning method & teaching materials' in Korea. On the other hand in Japan, articles about 'teaching-learning method & teaching materials' and 'the evaluation of education' were major fields. Third, the major research topic was 'overall of the housing education' in Korea, while 'living space' in Japan. Fourth, the major data collecting method were questionnaire surveys and experiments, mostly targeting students and teachers from junior and high schools. Descriptive statistics such as frequencies, percentages and means were most often used for data analyses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1777-1783
• /
• 2014

In this paper, we designed and fabricated a high-speed semiconductor sensor for use in power control devices and analyzed the characteristics with pulsed radiation tests. At first, radiation sensitive circular Si PIN diodes with various diameters(0.1 mm ~5.0 mm) were designed and fabricated using Si epitaxial wafer, which has a $42{\mu}m$ thick intrinsic layer. The reverse leakage current of the diode with a radius of 2 mm at a reverse bias of 30 V was about 20.4 nA. To investigate the characteristic responses of the developed diodes, the pulsed gamma-radiation tests were performed with the intensity of 4.88E8 rad(Si)/sec. From the test results showing that the output currents and the rising speeds have a linear relationship with the area of the sensors, we decided that the optimal condition took place at a 2 mm diameter. Next, for the selected 2 mm diodes, dose rate tests with a range of 2.47E8 rad(Si)/sec to 6.21E8 rad(Si)/sec were performed. From the results, which showed linear characteristics with the radiation intensity, a large amount of photocurrent over 60mA, and a high speed response under 350ns without saturation, we can conclude that the our developed PIN diode can be a good candidate for the sensor of power control devices.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.364-371
• /
• 2015

For the cost down of polymer concrete, It is very important to reduce the use amount of polymer binder, which occupies most of the production cost of polymer concrete. Fly ash and atomizing reduction steel slag are spherical materials obtained from industrial by-products. Spherical atomizing reduction steel slag was manufactured using steel slag from reduction process of ladle furnace by atomizing technology. To investigate the physical properties of polymer concrete, polymer concrete specimens were prepared with the various proportions of polymer binder and replacement ratios of atomizing steel slag. Results showed that compressive and flexural strengths of the specimens were remarkably increased with the addition amount of polymer binder and the replacement ratios of atomizing steel slag. In the hot water resistance test, compressive strength, flexural strength, bulk density and average pore diameter decreased but total pore volume and pore diameter increased. We found that polymer concrete developed in this study reduced the amount of polymer binder by 18.2% compared to the conventional product because of the remarkable improvement of workability of polymer concrete using spherical fly ash and atomizing reduction steel slag instead of calcium carbonate (filler) and river sand (fine aggregate).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2020

The wind turbine blades should be designed to possess a high stiffness and should be fabricated with a light and high strength material because they serve under extreme combination of lift and drag forces, converting kinetic energy of wind into shaft work. The goal of this study is to understand the basic knowledge required to curtail the process time consumed during the construction of small wind turbine blades using carbon fiber reinforced polymer (CFRP) prepeg composites. The configuration of turbine rotor was determined using the QBlade freeware program. The fluid dynamics module simulated the loads exerted by the wind of a specific speed, and the stress analysis module predicted the distributions of equivalent von Mises stress for representing the blade structures. It was suggested to modify the shape of test specimen from ASTM D638 to decrease the variance in measured tensile strengths. Then, a series of experiments were performed to confirm that the bladder compression molded CFRP prepreg can provide sufficient strength to small wind turbine blades and decrease the cure time simultaneously.