References
- Gorninski, J. P., Dal Molin, D. C. and Kazmierczak, C. S., "Strength Degradation of Polymer Concrete in Acidic Environments," Cem. Conc. Compos., 29, 637-645(2007). https://doi.org/10.1016/j.cemconcomp.2007.04.001
- Murhaf Haidar, Elhem Ghorbel and Houssam Toutanji, "Optimization of the Formulation of Micro-Polymer Concretes," Const. Build. Mater., 25, 1632-1644(2011). https://doi.org/10.1016/j.conbuildmat.2010.10.010
- Fowler, D. W., "Polymers in Concrete: a Vision for the 21st Century," Cem. Conc. Com., 21, 449-452(1999). https://doi.org/10.1016/S0958-9465(99)00032-3
- Lech Czarnecki, Andrzej Garbacz and Jonna Kurach, "On the Characterization of Polymer Concrete Fracture Surface", Cem. Conc. Compos., 23, 399-409(2001). https://doi.org/10.1016/S0958-9465(01)00009-9
- Ohama, Y., "Recent Research and Development Trends of Concrete-Polymer Composites in Japan," Proc. 12th Inter. Cong. on polym. in Conc., September, Chuncheon(2007).
- Dionys Van Gemert, Lech Czarnecki, et al., "Cement Concrete and Concrete-Polymer Composites: Two Merging Worlds," Cem. Conc. Compos., 27, 926-933(2005). https://doi.org/10.1016/j.cemconcomp.2005.05.004
- Jose T. San-Jose, Ingo J. Vegas and Moises Frias, "Mechanical Expectations of a High Performance Concrete Based on a Polymer Binder and Reinforced with Non-Metallic Rebars," Const. Build. Mater., 22, 2031-2041(2008). https://doi.org/10.1016/j.conbuildmat.2007.08.001
- Gorninski, J. P., Dal Molin, D. C. and Kazmierczak, C. S., "Comparative Assessment of Isophtalic and Orthophtalic Polyester Polymer Concrete: Different Costs, Similar Mechanical Properties and Durability," Const. Build. Mater., 21, 546-555(2007). https://doi.org/10.1016/j.conbuildmat.2005.09.003
- Hwang, E. H. and Kim, J. M., "Characteristics of Concrete Polymer Composite Using Atomizing Reduction Steel Slag (I) (Use of PMMA as a Shrinkage Reducing Agent)," Appl. Chem. Eng., 25(2), 181-187(2014). https://doi.org/10.14478/ace.2014.1003
- Hwang, E. H. and Kim, J. M., "Characteristics of Concrete Polymer Composite Using Atomizing Reduction Steel Slag as an Aggregate (II) (Use of Polystyrene as a Shrinkage Reducing Agent)," Appl. Chem. Eng., 25(4), 380-385(2014). https://doi.org/10.14478/ace.2014.1044
- Bae., G. B., Lee, S. G., Yoon, H. J. and Lee, J. D., "Preparation and Characteristic of Sheet Molding Compound using Unsaturated Polyester Resin with Low Profile Agent of Polystyrene," Korean Chem. Eng. Res., 50(3), 588-593(2012). https://doi.org/10.9713/kcer.2012.50.3.588
- Hwang, E. H., Kim, J. M. and Yeon, J. H., "Characteristics of Polyester Polymer Concrete Using Spherical Aggregates from Industrial By-Products," J. Appl. Polym. Sci., 2905-2912(2013).
- Kim, J. M., Cho, S. H., Oh, S. Y. and Kwak, E. G., "The Properties of Underwater-Harding Epoxy Mortar Used the Rapidly Cooled Steel Slag," J. Korea Conc. Instit., 19, 39-45(2007). https://doi.org/10.4334/JKCI.2007.19.1.039
- Hwang, E. H., Lee, C. H. and Kim, J. M., "Physical Properties of Polymer Concrete Composite Using Rapid-Cooled Steel Slag (I)," Appl. Chem. Eng., 23, 210-216(2012).
- Hwang, E. H., Lee, C. H. and Kim, J. M., "Physical Properties of Polymer Concrete Composite Using Rapid-Cooled Steel Slag (II)," Appl. Chem. Eng., 23, 409-415(2012).
- Montgomery, D. G. and Wang, G., "Instant-Chilled Steel Slag Aggregate in Concrete(Strength Related Properties)," Cem. Conc. Res., 21, 1083-1091(1991). https://doi.org/10.1016/0008-8846(91)90068-S
- Montgomery, D. G. and Wang, G., "Instant-Chilled Steel Slag Aggregate in Concrete(Fracture Related Properties)," Cem. Conc. Res., 22, 755-760(1992). https://doi.org/10.1016/0008-8846(92)90098-G
- O. S. Oh et al., Patent No. 10-0098062-0000(1996).
- Semerad, E., Kremnitzer, Lacom, P., Holub, W. F. and Sattler, P., "Influence of Polymer Addition on Microscopic Properties," Proc. 5th Inter. Cong. on polym. in Conc., September, Brighton (1987).
Cited by
- 고성능 폴리머 콘크리트 복합재료의 내구성(내약품성 및 내열성을 중심으로) vol.28, pp.3, 2017, https://doi.org/10.14478/ace.2017.1040