• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.267-276
• /
• 2023

Based on the tourism input-output data of five provinces and cities in China's Bohai Rim region from 2015~2021, this study analyzes the efficiency of regional tourism using DEA-BCC and DEA-Malmquist index, as well as its contribution to regional economic efficiency, and identifies factors influencing the comprehensive efficiency. The research results indicate that the comprehensive efficiency of the tourism industry in the China Bohai Sea region has reached an optimal level of 88.9%, but there is still room for improvement, with overall fluctuations. The overall productivity of the tourism industry exhibits a "U"-shaped fluctuating pattern, with growth mainly driven by technological advancements. Due to the impact of the COVID-19 pandemic, the region experienced a nearly 50% decrease in total factor productivity in 2019~2020. However, in 2021, with the implementation of various government stimulus policies, the tourism efficiency rapidly recovered to 80% of pre-pandemic levels. In terms of the impact of the tourism industry on the regional economy in the China Bohai Sea region, Hebei Province stands out as a significant contributor. Based on the aforementioned research findings, the following recommendations are proposed in three aspects: optimizing the supply structure, increasing innovation investment, and strengthening internal collaboration. These recommendations provide valuable insights for enhancing regional tourism efficiency and promoting regional synergy.

• Journal of Industrial Convergence
• /
• v.21 no.11
• /
• pp.117-124
• /
• 2023

This study is a descriptive research study to determine the relationship between nursing students' emotional intelligence, communication competence, interpersonal competence, and adaptation to college life, and to identify factors that adaptation to college life. The subjects of the study were 173 nursing students attending a university in G City, and data collection was conducted from September 10 to October 10, 2022 Descriptive statistics, t-test, ANOVA, Pearson correlation coefficient, and multiple regression analysis were performed on the collected data using SPSS 25.0 program. The results showed a significant positive correlation between emotional intelligence(r=.760, p<.001), communication competence(r=.600, p<.001), and interpersonal competence(r=.451, p<.001). Factors that have a significant impact on adaptation to college life include emotional intelligence(𝛽=.543, p<.001), communication competence(𝛽=.433, p=.001), and interpersonal competence(𝛽=.283, p<.031). The total explanatory power of these variables on adaptation to college life was 59.9%, and emotional intelligence was confirmed to be the main influencing factor.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.153-159
• /
• 2024

This study is a descriptive research study to determine the relationship between middle-aged women's social support, resilience and quality of life, and to identify factors that affect quality of life. The participants were 162 middle-aged women in G City. Data was collected from May 10 to June 10, 2023. Data were analyzed through descriptive statistics, t-test, one-way ANOVA, Pearson's correlation coefficient, and multiple regression using SPSS 25.0 program. The social support was 3.36±0.38, resilience was 3.39±0.42, and quality of life was 3.18±0.50. Quality of life was positively correlated with social support(r=.502, p<.001), resilience(r=.530, p<.001). Factors that have a significant impact on quality of life include resilience(β=.422, p<.001), social support(β=.412, p<.001) and health status(β=.212, p=.001). The total explanatory power of these variables on quality of life was 39.2%. Therefore, it is necessary to develop effective programs and strategies to improve the quality of life of middle-aged women by improving their resilience, social support, and health status.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.159-172
• /
• 2023

This study aims to empirically investigate the relative effects of business-to-business (vs. business-to-consumer) business model innovation (BMI) on innovation performance. The research examines the impact of three key components of BMI: 1. value creation, 2. value proposition, and 3. value capture, on innovation performance. The 2022 Entrepreneurship Survey data by the Korean Entrepreneurship Foundation was used to analyze 2,879 companies. An exploratory data analysis (EDA) including various categories such as industry, firm, CEO, and technology chracteristics was conducted to show the latest startup status in Korea. The results show that value creation of B2B (vs. B2C) firms has a more positive and significant impact on innovation performance. Whereas, value proposition of B2C (vs. B2B) firms was found to have a more positive and significant effect on innovation performance. Interestingly, value capture did not show any effects for either type of firms. Additionally, the study employed seemingly unrelated regression (SUR) analysis for robustness checks. These findings provide important insights about the relative effects of B2B-BMI (vs. B2C-BMI).

• Journal of Industrial Convergence
• /
• v.22 no.7
• /
• pp.81-91
• /
• 2024

This study was conducted to determine the status of allergic diseases and mental health in adolescents, confirm the relationship between allergic diseases and mental health, and provide basic data for developing effective disease management measures for adolescents at the developmental stage. Secondary analysis was performed on the data from the 17^th Youth Health Behavior Online Survey, and complex sample descriptive statistics, cross-tabulation, and logistic regression analysis were performed using the SPSS 26.0 program. As a result of the study, those with one or more allergic diseases were 1.286 times more likely to have stress (B=1.286, p<.000), 1.289 times more likely to be depressed (B=1.289, p<.000), and 1.399 times more likely to have generalized anxiety disorder (B=1.399, p<.000) was highly likely to experience it. Additionally, factors affecting the mental health of adolescents with allergic diseases were gender, economic level, academic performance, drinking experience, and smoking experience. Stress and generalized anxiety disorder were more likely to be experienced by female students, if they had a lower economic level and academic performance, and if they drank alcohol or smoked. Male students were more likely to experience depression if their economic level and academic performance were higher, and if they did not drink alcohol or smoke. Based on these results, we hope to establish a practical approach by establishing effective strategies to manage allergic diseases in adolescents and the mental health conditions that may arise from them.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.188-206
• /
• 2010

Data Envelopment Analysis(DEA) is an operations research-based method for measuring the performance efficiency of decision units that are characterized by multiple inputs and outputs. DEA has been applied successfully as a performance evaluation tool in many fields. However, it has not been extensively applied in the shipbuilding industry. This paper applied the input-oriented DEA model, and Malmquist indices to the 7 shipbuilding firms to measure the efficiency and productivity changes during the period of 2004 to 2009. The Malmquist indices will be decomposed into three components such as pure efficiency change, scale efficiency change, and technical change. The empirical results show the following findings. First, the DEA findings indicate that main source of inefficiency is scale rather than pure technical. Second, the Malmquist indices show that an overall decrease in productivity.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.1-21
• /
• 2020

Recently, the emergence of new technologies caused by the Fourth Industrial Revolution caused a great change not only in the overall society but also in the retail industry. In the retail industry, unmanned stores based on new technologies have emerged, changing the consumption behavior of consumers. In particular, the global pandemic caused by COVID-19, which appeared in December 2019, raised social risks, and as a result of this, the beginning of the non-face-to-face era, interest in unmanned stores is increasing. In this study, the effects of benefits factors (perceived usefulness, perceived economics, perceived enjoyment, relative advantages) and sacrifice factors (perceived risk, technicality) perceived by unmanned store users on continuous use intention through perceived value. In addition, it is a study to test through empirical analysis what role the social risk from COVID-19 plays in the process of consumption through unmanned stores. The purpose of this study is to provide strategic implications for the activation of unmanned stores in the non-face-to-face era. In this study, a total of 293 copies of data were collected for users of unmanned stores for hypothesis testing. In addition, the collected data was analyzed using SPSS 21.0 and AMOS 21.0 statistical programs. The results of the study are summarized as follows. First, it was found that the perceived benefits (perceived usefulness, perceived economics, perceived playfulness, and relative advantages) of unmanned stores all had a significant positive effect on perceived value. Second, it was found that all perceived sacrifices (perceived risk, technicality) of unmanned stores had a significant negative effect on perceived value. Third, it was found that the perceived value of unmanned stores had a significant positive effect on the intention to continue use. Finally, the social risk from COVID-19 has been shown to play a moderating role when the perceived sacrifice of unmanned stores affects the perceived value.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• Journal of The Korean Association For Science Education
• /
• v.25 no.7
• /
• pp.736-745
• /
• 2005

The purpose of this paper was to develop and execute self-appraisal test items on secondary science teachers. Test items included 6 sub-fields-subject knowledge, teaching strategies, teaching skills, assessment, laboratory management, and professional development - and 77 items. Using these test items, science teachers were able to evaluate their ability as prescribed by a 5-point Likert scale. Furthermore, teachers were able to comprehend fields showing their highest and lowest scores among the 6 sub-fields. They could then place special attention on the lowest field insuring self-growth as a science teacher. Self-appraisal test items were developed by analyzing related references on teacher evaluation criteria and standards. 220 subjects composed the sample on which these test items were executed. The results of this study were as follows. First, content validity of the test items was 80.8%. The range of sub-field reliabilities was .76 - .86 and the reliability coefficient of the entire test was .95. The range of correlation coefficient between each subfield was .54 - .69 and that of subfields and entire test was .54 - .79. The correlation coefficient between professional development and the whole test was .79, the highest coefficient observed. Second, significant difference was found according to teaching experience. More experienced teachers had higher scores in all 6 sub-fields (p<.05). In addition, a significant difference according to gender was observed in subject knowledge and laboratory management (p<.05); male teachers had higher scores than female teachers. Also, the higher the level of experience, the higher the scores for subject knowledge (p<.05). Lastly, the teacher's major did not result in any significant differences.