• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.373-387
• /
• 2009

Many cultural heritages with various periods including the 'Three Kingdoms Period' were discovered in Chulmamyeon, Busan. Detailed geomorphological and geological investigation was performed due to archaeological importance of the study area. Aerial photographic analysis for geomorphology and analysis of vertical sedimentary sections to interpret the sedimentary characteristics were carried out. Many pebbles with specific features were discovered during the investigation. The characteristics and origin of the pebbles are analysed based on their size, rock type and shape. The study area is located in a relatively low and gentle slope compared with neighboring regions. The strong N-S trending lineaments may influence the topographic features and the distribution of wells discovered in this area. The exposed sections during excavation are divided into several layers depending on colors and materials included. Some of the layers may be developed not by nature but by human activities. The similarity of the pebbles indicates that these pebbles may artificially be collected or produced for a specific purpose. This study shows that geomorphology and geology can be important in location and development of archaeological sites. The analysis and interpretation for the origin of the pebbles indicates that geological studies can be helpful to interpretation of archaeological studies.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.241-246
• /
• 1996

This Experiment was conducted to know effect of cutting times and nitrogen split application rates on shoot and root-related characters of Atractylodes japonica. The cutting time was forced on none, once and twice along with three levels of nitrogen split application, all basic 50 -30 -20% and 40 -30 -30%. The plant height declined with increased cutting time and dry matter weight was increased with nitrogen split application under none and once cutting. Average yield of cutted shoot as edible wild plant was 257kg/10a at once cutting condition, but twice cutting condition was little and unfavorable to use edible wild plant because shoot was coarse. Yield 0 dry rhizome was the highest at once shoot cutting und­er 50 -30 -20% nitrogen split application by 471kg/10a.Especially, culture of Atractylodes japonka needed once shoot cutting one the 10th-30th of May.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.2
• /
• pp.48-60
• /
• 2000

This study is aimed to clarify the distribution chracteristics of marine terraces and extract the specific surface at Gampo-eup, Gyeongju city on the map of 1:5,000 using GIS. The effects and problems occurred on the process of using GIS were investigated for the research of marine terrace. The longitudinal profile analysis was carried out along the 12 sections on the geomorphic surfaces of the study area, and actually High higher surface(HH-surface) was found over 100m a.s.l., which has not been reported till now. And the occupancy rate could be calculated by substitution on the height between 4m and 87m a.s.l. for each mean slope degree $1-5^{\circ}$ obtained from the actual measuring along four sections. Consequently the lower-I surface was highly reliable to use as the key bed for studying marine terraces. The accurate and detail analysis about the marine terraces is able to be accomplished on the basis of meaningful actual measuring, though its general possible distribution area can be extracted from GIS with the less effort. Namely the quantified results obtained from GIS could offer the basis for the objective analysis of the geomorphic surfaces. And we can look over the landscape and investigate the surfaces with reliefs effectively in relation to the real geomorphology on the study area, where in situ approach is difficult. But the digital map with a large scale should be offered first of all in order to raise the accuracy of the analysis.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The DTM(Digital Terrain Model) in GIS(Geographical Information System) shows the elevation from interpolation using data points surveyed. In panoramic flat landform, pixel size, resolution of source data may not be the problem in using DTM However, in mountainous landform like Korea, appropriate resolution accuracy of source data are important factors to represent the topography concerned. In this study, the difference in contour interval of source data, the resolution after interpolation, and different data structures were compared to figure out the accuracy of slope calculation using DTM from the topographic maps of Togyusan National Park Two types of GIS softwares, Idrisi(grid) ver. 2.0 using the altitude matrices and ArcView(TIN) ver. 3.0a using TIN were used for this purpose. After the analysis the conclusions are as follows: 1) The coarser resolution, the more smoothing effect inrepresenting the topography. 2) The coarser resolution the more difference between the grid-based Idrisi and the TIN-based ArcView. 3) Based on the comparison analysis of error for 30 points from clustering, there is not much difference among 10, 20, 30 m resolution in TIM-based Airview ranging from 4.9 to 6.2n However, the coarser resolution the more error for elevation and slope in the grid-based Idrisi. ranging from 6.3 to 10.9m. 4) Both Idrisi and ArcView could net consider breaklines of lanform like hilltops, valley bottoms.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.41-51
• /
• 1974

A study of the sanitary quality of Pacific oysters (Crassostrea gigas) and growing waters associated with raft culture in Burley Lagoon, Washington was conducted. The study was sponsored by the Agency for International Development of the U.S. Department of State. The results obtained in this study are as follows: The average values of temperature, salinity and turbidity in the water showed that the values of bottom sample were slightly higher than top samples. The difference was about $0.3^{\circ}C$ for temperature, $0.5\%_{\circ}$ for salinity and 0.1 JTU for turbidity. The changes of temperature and salinity by tide generally followed the tide cycle pattern. Sanitary indicator microorganism concentrations in top water were generally higher than those in bottom water. In general, the levels of mean coliform and fecal coliform MPN's varied inversely with tide level indicating that the sources of these groups of microorganisms are the fresh water streams flowing into the estuary. The $35^{\circ}C$ plate counts were more stable at different tide levels. Mean values of coliform and fecal coliform MPN's in oysters demonstrated that levels in top oysters were generally higher than those in bottom oysters. However, mean values of $35^{\circ}C$ Plate count in oysters did not show this pattern. The mean levels of both coliform and fecal coliform MPN's in oysters also correlated inversely with tidal level. The accumulation ratios of oysters obtained during the study period ranged from 8.6 to 19.7 for mean coliform MPN and 16.9 to 44.3 for fecal coliform MPN. According to the results obtained from present study, one suggestion could be of considerable importance for the sanitary operation in hanging culture of pacific oysters. The results indicate that harvest of the oysters at high tide would result in lower levels of indicator organisms in the shellfish.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.477-486
• /
• 2020

The purpose of this study was to evaluate the effects of reconstruction filters, X-ray source trajectories and intervals in the quality of digital tomosynthesis (DT) images, and the results was clinically validated. The filtered back-projection was implemented by using Ramp, Shepp-Logan, Cosine, Hamming, Hann and Blackman filters, and the X-ray source trajectories were simulated with 1 × 36, 2 × 18, 3 × 12, 4 × 9 and 6 × 6 arrays. The X-ray source intervals were 5, 10, 20, 30 and 40 mm. The depth resolution, spatial resolution and noise of DT image were evaluated by measuring artifact spread function (ASF), full width at half maximum (FWHM) and signal-to-noise ratio (SNR), respectively. The results showed that the spatial resolution and noise properties of DT images were maximized by the Ramp and Blackman filters, respectively, and the depth resolution and noise properties of the DT images obtained with a 1 × 36 X-ray source trajectory were superior to the other trajectories. The depth resolution and noise properties of DT images improved with an increase of X-ray source intervals, and the high X-ray source intervals degraded the spatial resolution of DT images. Therefore, the characteristics of DT images are highly dependent on reconstruction filters, X-ray source trajectories and intervals, and it is necessary to use optimal imaging parameters in accordance with diagnostic purpose.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.140-146
• /
• 2018

Wild boars have expanded their habitats in Korea in recent years and caused serious social problems such as crop damage and appearance in urban areas. This study was carried out from May to October 2012 to investigate the environmental factors that affect crop damage based on actual cases reported in Geochang County of Gyeongnam Province, Korea. The analysis showed that the damages by wild boars occurred mainly between August and September, and rice was damaged most often while sweet potatoes were damaged most intensely. The results indicated that the damages were related to the wild boars' preference of crop and the seasonal availability of crops. Other factors that affected the crop damage included the slope, the topographic relief, and the distances from forest, stream, road, and residential area. There was no significant difference of environmental factor according to damage intensity, suggesting that the wild boars tended to attack the same cropland repeatedly and thus accumulating the damage. Our study suggests that reducing crop damages by wild boars will require cultivating crops less preferred by wild boars, installing electric fences, and controlling wild boar population with hunting and trapping.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.27-46
• /
• 2016

In this study, the parameter-elevation regressions on independent slopes model-Kongju National University(PRISM-KNU) system was developed to interpolate monthly precipitation data. One of the features of PRISM-KNU is that it can adjust the allowable range of slope according to the elevation range in the equation representing a linear relationship between the precipitation and elevation. The parameter value of the model was determined by using the optimization technique, and the result was applied to produce monthly precipitation data with a spatial resolution of $1{\times}1km$ from 2000 to 2014 in South Korea. In the result, the Kling-Gupta Efficiency for model evaluation was over 0.7 in 86% of the total cases simulated. In addition, a dramatic change in the spatial pattern of precipitation data was observed in the output of the Modified Korean PRISM, but such a phenomenon did not occur in the output of the PRISM-KNU. This study confirmed the appropriateness of the PRISM-KNU, and the result showed that the spatial consistency of the data produced by the model improved compared with that produced by the Modified Korean PRISM. It is expected that the PRISM-KNU and its output will be utilized in various studies in the future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.48-64
• /
• 1999

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsurface velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etc. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data quality Geophone spacing of 3 to 5m is recommended in the land slope area for house land development and 5 to 10m in the tunnel site. In refraction tomography technique, the number of source points should be more than a half of available channel number of instrument, which can make topographic effect ignorable. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700${\~}$1,200m/s, soft rock 1,200${\~}$1,800m/s. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss. In case of tunnel site, it is recommended in tunnel design and construction to consider that tunnel is in contact with soft rock layer where three lineaments intersecting each other are recognized from the results of the other survey.