• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.9-13
• /
• 1996

슬라이딩 모드 제어기의 실현시 발생하는 고주파 chattering 현상을 제거하기 위하여 본 논문에서는 스위칭 표면 행렬의 Range-space 동특성을 이용한 연속 시간 스위칭 다이나믹을 제안한다. 전체 폐루프 시스템은 정칙 변환에 의해 빠른 부시스템과 느린 부시스템으로 분해되어, 결국 전체 폐루프 시스템의 고유치는 각각 스위칭 표면 행렬의 Range-space와 Null-space의 동특성을 지배하는 부시스템들의 고유치들로 구성됨을 보인다. 그리고, 정합된 불확실성이 존재하는 경우 제안된 스위칭 다이나믹을 가진 제어 시스템의 응답은 일정 시간이 경과된 후 스위칭 평면의 임의의 영역으로 균일하게 유계된다는 것을 증명한다. 또한, 제어 입력의 크기에 대한 제약성을 만족하면서도 전체 제어 시스템의 정상 상태 오차를 감소시키기 위하여 두개의 스위칭 다이나믹을 도입한 수정된 슬라이딩 모드제어기를 제안한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.274-282
• /
• 2013

In this paper, a linear motor stroke controller using a phase lag filter and a single phase PWM inverter with a current controller has been implemented. In order to control the cooling capability of a refrigerator or an air conditioner in which linear compressors are applied, the piston speed should be controlled. The piston speed control can be obtained by adjusting the frequency or the stroke of linear motors. Generally, the frequency is fixed, for example, as 60Hz and the stroke is adjusted. The dynamic performance of linear compressors depends on how accurately the stroke or the piston position is controlled by the current applied. A linear motor piston position controller with a current control loop is proposed and verified via some simulation studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1117-1125
• /
• 2000

A current mode PWM method applied one cycle response to averaging circuit model Buck converters is presented. The controller nonlinear PWM implement is based on the error between the switched variable and the response reference to zero each cycle. As the result, the system transfer function is derived as a function of the desired close loop poles, simplifying the design procedure and bringing forward all the important characteristics of the close loop system. The proposed controller has significant advantages over conventional current mode control methods in noise susceptibility, dynamic response and without inductor current sensing, Finally, the simulation and experiment results confirm the proposed PWM control techniques.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.80-84
• /
• 1995

In the equivalent state with an actual transmission, the paper is presented the novel analysis of the dynamic characteristics of the automatic frequency control, using for QPSK relay system in digital land mobile communication, which is adopted a crass product frequency discriminator and the various kinds of frequency variances that calculate the closed loop frequency jitter are found.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.134-141
• /
• 2009

The new method is proposed to improve the dynamics of the phase angle detector during abrupt voltage dip caused by a grid fault. Usually, LPF(low pass filter) is used in the feedback loop of SRF(Synchronous Reference Frame) - PLL (Phase Locked Loop) system because the measured grid voltage contains harmonic distortions and sensor noises. A better transient response can be obtained with the proposed design method for SRF-PLL by the analysis of linearized model of the PLL system including LPF. Furthermore, in the proposed method, the controller gain and LPF cut-off frequency are changed from normal value to transient value when the voltage disturbance is detected. This paper shows the feasibility and the usefulness of the proposed methods through the computer simulation and the experiment.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.552-553
• /
• 2014

본 논문은 인버터 독립운전모드에서의 출력 전압 제어 방식을 다루고있다. 본 논문은 계통 연계 모드와 독립 운전 모드간의 모드 절환이 가능한 계통 연계형 인버터 출력단에 비선형 불평형 부하 연결시 발생하는 출력전압 왜곡현상에 대처하기위해 기존에 주로 사용되는 PI 제어를 이용한 방식을 대신해 고정좌 좌표계 또는 abc natural 프레임 하에서 사용되는 PR 제어를 사용하여 고조파 보상을 수행하였으며 추가적으로 계통 연계 모드시 외부 PR 출력 전류 루프와 내부 PR 출력 전압 루프를 가지는 제어기를 제안하였고 이러한 제어 방식이 계통 연계 모드의 출력 전압 THD 성능개선에 효과적임과 동시에 또한 모드 변환시의 동특성을 좀더 개선할 수 있다는 점을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.161-163
• /
• 2009

본 논문은 차세대 에너지 저장장치로 각광받는 슈퍼커패시터를 이용한 양방향 DC-DC컨버터의 구성 및 빠른 동특성을 갖는 이중 루프 PI제어기 설계를 제시하였다. 제어기는 초기 슈퍼캐패시터의 충전을 위한 정전류 제어기와 초기 충전 이후에 동작을 개시하는 전력제어기를 구성하였다. 구성된 제어기는 PSIM을 이용한 시뮬레이션을 통하여 검증하였다.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.179-190
• /
• 2009

Travel time is one of the most important traffic parameters to evaluate operational performance of freeways. A variety of methods have been proposed to estimate travel times. One feasible solution to estimating travel times is to utilize existing loop detector-based infrastructure since the loops are the most widely deployed detection system in the world. This study proposed a new approach to estimate travel times for freeways. Inductive vehicle signatures extracted from the loop detectors were used to match vehicles from upstream and downstream stations. Ground-truthing was also conducted to systematically evaluate the performance of the proposed algorithm by recognizing individual vehicles captured by video cameras placed at upstream and downstream detection stations. A lexicographic optimization method vehicle reidentification algorithm was developed. Vehicle features representing the characteristics of individual vehicles such as vehicle length and interpolations extracted from the signature were used as inputs of the algorithm. Parameters associated with the signature matching algorithm were calibrated in terms of maximizing correct matching rates. It is expected that the algorithm would be a useful method to estimate freeway link travel times.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1170-1176
• /
• 2010

This study addresses adaptive control of UAVs(Unmanned Aerial Vehicles) pitch-axis maneuver. The MRAC(Model Referenced Adaptive Control) approach is employed to accommodate uncertainties which are introduced by feedback linearization of pitch attitude control by elevator input. The model uncertainty is handled by adaptation laws which update model parameters while the UAV is under control by the feedback control law. Steady-state pitch attitude achieved by the stabilizing control law is derived to provide insight on the closed-loop behavior of the controlled system. The proposed idea is free of linearization, gain-scheduling procedures, so that one can design high maneuverability of UAVs for pitching motion in the presence of significant model uncertainty.