• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.163-175
• /
• 2011

Though polycyclic aromatic hydrocarbon compounds (PAHs) in marine sediment has been produced by many colleges and institution in Korea, it is difficult to compare PAHs data in a study area with those in other areas due to the lack of confidence for the quality of data from the other organization. Therefore, we suggested the protocol for PAHs analysis in marine sediment through examining the method of PAHs analysis described in over twenty scientific papers and reports. When a known amount of 23 PAHs were spiked into a sediment and anlyzed following this new protocol, very good recoveries were obtained. In addition, for college and institution with their own method to analyze PAHs can keep producing PAHs data without exchanging to this new PAHs protocol, the method to get a full confidence through the QA/QC for the PAHs data produced by these organization is included to the protocol.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2008

Technical trends of propulsion system for small aircraft are investigated. Currently, most small aircraft are equipped with piston engine, turboprop and turbofan engines, and the technology development is going continuously. For piston engines, new diesel engines are arising besides gasoline engine. The diesel engines use relatively low-cost and easy to get fuel(Jet A), so the demand for small aircraft is getting increased, and new engines with high reliability and efficiency are being developed. For gas turbine engines, application of small turbofan is getting increased for newly arising VLJ market and the engine demand will be rapidly increased in the future. On the other hand, some electric propulsions without fossil fuels are being developed without high cost of fuel and environmental effects. In the future, propulsion system for small aircraft will be developed having enhancement of performance and efficiency with higher reliability and safety.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.80-85
• /
• 2013

This paper describes a probabilistic structural design method of composite propulsion system by comparing safety factor based on average value and allowable value with structural reliability. Generally, the required structural safety factor and reliability of composite pressure vessel are 1.5 and 0.999, respectively. In the case of structural design using average strength, the safety factor which satisfies the required structural reliability depends on the variation of fiber strength. However, the structural design using allowable value shows constant safety factor for the variation of fiber strength, because the allowable value of fiber strength is calculated by considering the variation of fiber strength. Through the analysis results, it was known that the fiber strength is the most important design random variable for the structural design of composite pressure vessel and the variation of fiber strength must be minimized to develop the high performance composite propulsion system.

• The Korean Journal of Archival Studies
• /
• no.77
• /
• pp.109-150
• /
• 2023

Prior researchers interpreted the records of criminal cases involving the Progressive Party from a historical perspective. In marked contrast to existing trends, this study examines the Progressive Party case records through the lens of archival science. This study dissects the Progressive Party case records as a single and complete record group and at each stage of their life cycle from police investigation through criminal prosecution to trial. This approach enables a holistic analysis of archival characteristics of the records. This study begins with an appraisal of the nature and types of case records generated and maintained by the various agencies in light of the investigatory authorities delegated to each institution. This study then dissects the police, prosecution, and Counter Intelligence Corps records leading up to the indictment of Progressive Party members as well as the court records of the trial that followed. In particular, this study reveals the insufficiency and illegality of the evidence against the defendants in the Progressive Party case from an archival standpoint. Setting aside the admissibility or strength of the evidence under criminal law, the present study demonstrates that the records lack reliability, authenticity, and integrity-the fundamental attributes required for evidentiary efficacy of records from an archival standpoint.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.172-187
• /
• 2024

In good laboratory practice (GLP), analytical method validation prior to toxicity testing is important in terms of concentration setting and sample preparation. The testing agency performed validation of the two requested test substances using high-performance liquid chromatography (HPLC), and as a result, the analysis satisfied the criteria for specificity, system suitability, linearity, intra-day reproducibility, homogeneity, stability, concentration analysis, and quality control. The method was established and validated. However, the content of standard substances in the test report of the requesting institution was found to be 1.34 and 1.17 times higher than the results of the testing institution, confirming that deriving results through validation of analysis methods suitable for GLP is important in terms of securing reliability and stability.

• Journal of the Korean Society for information Management
• /
• v.40 no.4
• /
• pp.329-349
• /
• 2023

With the rapid development of information and communication technology, the speed of data production has increased rapidly, and this is represented by the concept of big data. Discussions on quality and reliability are also underway for big data whose data scale has rapidly increased in a short period of time. On the other hand, small data is minimal data of excellent quality and means data necessary for a specific problem situation. In the field of culture and arts, data of various types and topics exist, and research using big data technology is being conducted. However, research on whether basic information about culture and arts institutions is accurately provided and utilized is insufficient. The basic information of an institution can be an essential basis used in most big data analysis and becomes a starting point for identifying an institution. This study collected data dealing with the basic information of culture and arts institutions to define common metadata and constructed small data in the form of a knowledge graph linking institutions around common metadata. This can be a way to explore the types and characteristics of culture and arts institutions in an integrated way.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.63-72
• /
• 2002

We applied 3-D balancing technique to estimate nationwide travel demand using travel behavior of Toll Collecting System data, socio-economic data in the region, and the data of several organizations connected with travel demand estimation. The results from this study were validated by the indices of RMSE(Root Mean Square Error), TLFD(Trip Length Frequency Distribution). TCS based inter-city average travel to measure of reliability and adequacy of estimated travel demand. Finally, 3-D technique seems to reflect more travel behavior of TCS OD than 2-D technique, but we cannot assert that 3-D technique superior to 2-D technique.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.123-133
• /
• 2002

In Network Environment, Kerberos certification mechanism to require Kerberos server in other area unconditionally belief. Also, Kerberos server in cooperation area must be share server of other area and secret key. To solve these two problems, this paper proposed safe security mechanism of doing to ably IETF CAT's PKINIT/PKCROSS a1gorithm with Public Key Infrastructure and use Directory System and service between realms do trust and prove each Kerberos trust center base. Also, Although Kerberos server of each area must be foreknowing each server's secret key and public key, Obtain through Trust center and acquire each area's public key and common symmetric key, Application server excluded process that must register key in Key Distribution Center.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.158-162
• /
• 2004

Reliability of welded structures in power plant facilities is very important, and their reliability evaluation requires exact materials properties. But, the conventional PQR (Procedure Qualification Record) can hardly reflect the real material properties in the field because the test is only done on specimens with simulated welding. Therefore, a continuous indentation technique is proposed in this study for simple and non-destructive testing of in-field structures. This test measures the indentation load-depth curve during indentation and analyzes the mechanical properties such as the yield strength, tensile strength and work hardening index. This technique has been applied to evaluate the tensile properties of the weldment in the main steam pipe and hot reheater pipe in power plants under construction and in operation.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.55-67
• /
• 2009

In Korea, previously implemented road construction project caused a big budget waste due to overestimation of transport demand. There could be reasons for such inaccuracy of transport demand estimation, but the main reasons are: (1) low reliability of used basic road transport data and (2) inadequate sharing of data among agencies/departments. The National Transport Database and the Household Travel Database in Seoul Metropolitan Area, two representing basic road transport database, will be used to the establishment of a road construction plan that will be promoted afterwards. However, these materials have problems such as low reliability and inadequateness, too. Hence, focusing on transport demand estimation related databases, this paper will make proposals for enhancing their reliability and data sharing.