• 제목/요약/키워드: 기계자수직물

검색결과 4건 처리시간 0.022초

자수기법과 자수 폭에 따른 기계자수 직물 및 니트의 물성변화 (Property changes of the machine-embroidered fabrics in stitch techniques and width)

  • 장은정;박명자
    • 한국의상디자인학회지
    • /
    • 제21권3호
    • /
    • pp.1-11
    • /
    • 2019
  • This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

생체 신호 측정 압력 및 인장 직물 센서 전극용 자수가 가능한 전도사의 필요 물성 분석 (Analysis of the Necessary Mechanical Properties of Embroiderable Conductive Yarns for Measuring Pressure and Stretch Textile Sensor Electrodes)

  • 김상운;최승오;김주용
    • 감성과학
    • /
    • 제24권2호
    • /
    • pp.49-56
    • /
    • 2021
  • 본 연구의 목적은 생체 신호 측정 압력 및 인장 직물 센서의 전극을 자수 공정을 이용하여 제작할 때 전도사의 필요 물성을 파악하는 것이다. 스마트 웨어러블 제품의 전극을 전도사를 이용한 자수 공정을 통해 전극 및 회로 등을 제작하면 불필요한 재료 손실이 없고 복잡한 전극 모양이나 회로 디자인을 컴퓨터 자수기를 이용하여 추가 공정 없이 제작할 수 있다. 하지만 보통의 전도사는 자수 공정 내의 부하를 못 이기고 사절 현상이 발생하기에 본 연구에서는 silver coated multifilament yarn 3종류의 기계적 물성인 S-S curve, 두께, 꼬임 구조 등을 분석하고 동시에 자수기의 실의 부하를 측정하여 자수 공정 내 전도사의 필요 물성을 분석하였다. 실제 샘플 제작에서 S-S curve의 측정 결과가 가장 낮은 silver coated polyamide/polyester가 아닌 silver coated multifilament의 사절이 발생하였으며 그 차이는 실의 꼬임 구조와 사절이 일어난 부분을 관찰한 결과 수직으로 반복적인 부하가 일어나는 자수 공정에서 꼬임이 풀리면서 사절이 일어나는 것을 알 수 있었다. 추가적으로 압저항 압력/인장 센서를 제작하여 생체 신호 측정용 지표인 gauge factor를 측정하였으며 스마트 웨어러블 제품의 대량 생산화에 중요한 부분인 자수 전극 제작으로의 적용 가능성을 확인하였다.

기계자수 원단의 수축에 관한 연구 (Analysis of Fabric Shrinkage in Sewing Machine Embroidery)

  • 강창희;안춘순
    • 한국의류학회지
    • /
    • 제28권8호
    • /
    • pp.1057-1064
    • /
    • 2004
  • Silk, polyester, cotton, and wool fabrics were embroidered with varying stitch length of 3mm, 5mm, and 10mm to examine the difference in fabric shrinkage in terms of sewing direction, fabric thickness, cover factor, stitch length, and fiber type. Warp, filling, and bias direction of sewing resulted in no difference in fabric shrinkage. Within the samples with same stitch length, there was less fabric shrinkage in fabrics with higher fabric thickness or higher cover factor. There was larger shrinkage when sewn with longer stitch length. Comparing fabrics with different fiber types but similar fabric thickness, silk and polyester fabrics showed the smallest fabric shrinkage and wool fabrics showed the largest shrinkage. It is shown that similar fabric shrinkage between silk and polyester is due to the similarity in cover factor.

자연 상태에서의 인간감성 평가를 위한 비접촉식 인덕티브 센싱 기반의 착용형 센서 연구 (A Study on Wearable Emotion Monitoring System Under Natural Conditions Applying Noncontact Type Inductive Sensor)

  • 조현승;양진희;이상엽;이정환;이주현;김훈
    • 감성과학
    • /
    • 제26권3호
    • /
    • pp.149-160
    • /
    • 2023
  • 본 연구에서는 뇌혈류 신호를 측정할 수 있는 시변자계 기반의 비접촉식 직물센서를 설계하여 뇌혈류 신호 검출 및 감성평가의 가능성을 탐색하고자 하였다. 직물센서는 40 denier의 은사를 30합사 한 후 컴퓨터 기계 자수하여 코일형 센서로 구현하였다. 뇌혈류 측정 실험을 위해 코일형 센서를 경동맥 부위에 부착하고, ECG (Electrocardiogram) 전극과 RSP (Respiration) 측정 벨트를 부착 및 착용하도록 하였으며, 동시에 초음파 진단기기를 사용해 도플러 초음파 검사(Doppler Ultrasonography)를 수행하여 혈류 속도를 측정하였다. 피험자에게 Meta Quest 2를 착용시키고, 실험을 위해 조작된 영상 시각 자극을 보여주면서 혈류 신호를 측정한 후 시각 자극에 대한 감성평가 설문지를 작성하도록 하였다. 측정 결과, 도플러 초음파 검사를 통해 측정된 혈류 속도 신호에 변화가 생길 때 직물센서로 측정한 신호도 함께 변화하는 것으로 나타났다. 이를 통해 코일형 직물센서를 이용하여 뇌혈류활동 신호를 측정할 수 있다는 것을 검증하였다. 또한, 감성평가를 위하여 ECG 신호와 PLL 신호(직물센서 신호)에서 추출한 HRV를 계산해서 비교한 결과, 시각 자극으로 인한 교감신경계와 부교감신경계의 활성화에 따른 비율의 변화에 대해서는 직물센서로 측정한 신호와 ECG 신호를 이용해 계산한 값이 비슷한 경향을 보이는 것으로 나타났다. 결론적으로, 본 연구에서 개발된 시변자계 기반의 코일형 직물 센서를 통해 뇌혈류 변화 측정 및 감성 모니터링이 가능할 것으로 사료된다.