• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.59-65
• /
• 2004

동제련 공정중 Smelting에서 SiO2가 없으면 산화에 의한 생성물은 Molten Cu-Fe-O 'Oxysulphide' 와 Solid Magnetite가 된다. 이 생성물은 Cu-rich Liquid와 Cu-dilute Liquid로 분리가 불가능하다. Smelting의 목적이 Cu가 높은 Matte와 산화된 불순물의 효과적인 분리에 있으므로 이와 같은 분리가 불가능한 혼합상태를 분리해 주어야 한다. 이때 SiO2가 첨가되면 Cu-rich 상인 Matte가 FeO-rich상인 Slag로의 분리가 가능해진다. 이러한 의미에서 동제련에 있어서 규사의 성분은 매우 중요하며 현재 재생사를 규사로 대체 사용하고 있다. 한편 실리콘 모노머 합성 공정인 금속 규소와 접촉 물질(Contact Mass, 구리촉매와 조촉매)을 반응시켜 (Si+CH3Cl ${\rightarrow}$ (CH3)2SiCl3) 실리콘 모노머를 생산하는 공정중 반응이 끝난 접촉물질인 구리 폐촉매가 발생되는데 주요성분이 Cu 12%, Si80%로 재생사와 유사하여 동제련에 투입 가능 여부를 판단하기 위하여 각 공정에서의 용융실험을 통하여 결론을 도출하였고, 실 조업 Test를 거쳐 처리하게 되므로 구리 회수 및 폐기물로써의 매립을 중지 할 수 있었다.

• Journal of Aerospace System Engineering
• /
• v.8 no.1
• /
• pp.24-29
• /
• 2014

Turbopump is typically an assembly of rotors and casings, and there are a number of joints between them. Every joint should be leak-proof, so there is always a seal to accomplish the goal. Among various seals, metal seals are advantageous in that they are robust at high pressure, and at wide range of temperature. On the other hand, they require very high tightening forces, so that flanges, bolts and nuts should be carefully designed to ensure structural integrity and to prevent detrimental yielding of components. In this study, flange joints using conical seals made of stainless steel, solid flat metal seals made of copper and metal C-seals made of Inconel 718 were structurally designed and analyzed, considering both initial tightening and operating conditions.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.68-68
• /
• 1994

현재의 도금폐수처리는 침전옹집법에 의해 슬러지화 하여 매립되고 있으나, 이 매립물은 침출수를 방출하여 수질오염에 문제가 되고 있다. 특히 크롬폐수는 환원 침전시키고 있으나, 공기에 의한 산화로 재용출 가능성이 비교적 높다. 따라서 크롬 고금폐수를 역삼투압법에 의해 크롬이온을 농축 회수하고, 생성되는 투과수는 도금공정에 재투입하여 공해물질이 발생되지 않는 무배출 공정 (Zero-Discharge System)을 개발하는데 본 연구의 목적이 있다. 본 실험에서는 유가금속 중 크롬을 회수하기 위하여 크롬 모델폐수의 농도, pH등을 변화시키면서 연속공정으로 R.O. Cell에 의한 투과수와 막의 상태 변화등을 살펴보았으며, 크롬 실폐수를 R.O. Cell 테스트와 역삼투기기 (1-2ton/day)를 이용하여 농축수 및 투과수의 재이용에 관하여 실험하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.456-457
• /
• 2007

ATCB의 구조 중 아크 소호부는 공기 중에 노출된 금속(그리드)이 일정한 간격을 두고 적층되어 있는 모양을 하고 있다. 아크 소호부의 주기능은 아크를 소호실 안쪽으로 유도하여(기중 차단방식) 여러 개의 짧은 아크로 분할시키며 아크를 냉각, 소멸시켜 전류 차단을 빠르게 하는 것이다. 아크를 구동시키는 소호살의 형상과 구조에 따라 아크의 구동력은 많은 차이를 보이게 된다. 여기서는 신개념의 자동절체 스위치인 ATCB(Automatic Transfer Circuit Breaker)의 그리드의 구조에 따라 아크 구동력을 비교하여 아크 소호부의 최적 형상과 절연구조를 설계, 모델링하였다.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.460-465
• /
• 2019

In this study, the optimization of active materials and the preparation of particulate adsorbents for the application of metal oxide-based adsorbents for the treatment of $H_2S$, an air pollutant and odorant, occurred in various industrial facilities were investigated. The adsorbents were prepared by using $TiO_2$, which has a high physicochemical stability and relatively high specific surface area among metal oxides and also by different kinds and contents of active materials. The correlation between the physicochemical property and adsorption performance of the adsorbents confirmed that the adsorbent containing KI, which is a typical alkali metal among the active metals, showed the highest adsorption performance. The relationship between the contents and the adsorption performance was non-proportional, but a volcano plot. From XRD, SEM and BET analyses, it was confirmed that the active material was exposed to the surface above a certain amount and also the adsorption performance was the best when the specific surface area and pore volume were $40{\sim}100m^2/g$ and $0.1{\sim}0.3cm^3/g$, respectively. For practical application, the adsorbent was granulated or coated on a ceramic support. It was also confirmed that the adsorbent showed high adsorption performance when the adsorbent was coated on the ceramic rather than that of the granulated support.

• Clean Technology
• /
• v.25 no.3
• /
• pp.189-197
• /
• 2019

In this study an optimization of the preparation conditions of activated carbon with a ternary metal ion material to treat $H_2S$, which is classified as a representative odor substance, was carried out. For a metal ion material for enhancing the adsorption performance of hydrogen sulfide, performance enhancement was confirmed by combining Li and Fe or a ternary combination (K, Li, Fe) based on KI, which is a substance promoting hydrogen sulfide adsorption performance. Also, it was determined by XRD analysis that the reaction of each active substance with $H_2S$ was because of binding. The adsorption performance increased more than 3 times with heat treatment of the adsorbent with nitrogen compared with heat treatment with air. The maximum adsorption constant ($q_m$) value of the optimum adsorbent was 97.07, which is 6 times higher than that of the existing K-based impregnated activated carbon. It was confirmed that the objective adsorption amount ($0.3g\;g^{-1}$) was secured by an equilibrium between the mass transfer rate and adsorption rate. From the results, it was confirmed that the performance improvement was noticeable even when activated carbon with a reagent grade activated carbon particle size was modified. It was confirmed that the adsorption performance exists at high relative humidity levels of 60 and 100%, and the optimized preparation can be applied to a wet process such as a scrubber downstream.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.127-128
• /
• 2021

This study suggests surface wave communication, which uses a metal surface as a medium, to provide wireless communication in the extreme environment due to surrounding metal materials on vessels. The test was conducted on a G/T 265 tons tug boat, and to confirm the possibility of surface wave communication between a bridge and each designated space in the boat. As a result, the transmission speed was 13Mbps in average. For the test case between the bridge and the engine room, transmission speed was 4.3Mbps while the engine was on, and 1.2Mbps during sailing. It was able to be overcome by partially changing the equipment installation location. Surface wave communication in a bow storage, a fully enclosed space, had 8Mbps better transmission speed than wireless communication; this confirmed the superiority of surface wave communication in confined spaces on a vessel. Additional surface wave generators were designed and applied to resolve the paint issue. It is expected to apply surface wave communication to implement the new wireless solution on vessels.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.661-668
• /
• 1992

The polymeric compound [{Mo(NO)_2Cl_2}n] was prepared by reductive nitrosylation of NaNO_2 and acidified FeSO_4 with MoCl_5. The reactions of [{Mo(NO)_2Cl_2}n] with unidentate and bidentate ligands afforded neutral monomeric $[Mo(NO)_2Cl_2L_2(or L-L)] in high yield (80∼90%). 3,5-Lutidine, {\gamma}-Cyanopyridine, 1,2-Phenylenediamine, 1,10-Phenanthroline, sym-Diphenylethylenediamine, 9,10-Phenanthrenequinone, 1,3-Bis(diphenylphosphino)propane and 8-Hydroxyquinoline were used as coordinating ligands. The preparation and characterization of these dinitrosylmolybdenum complexes by elemental analysis, 1H NMR, infrared, and UV-Visible spectroscopy are reported. The infrared spectra indicate that in all of the compounds prepared, the NO groups occupy cis-positions in the octahedral group of ligands.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.906-913
• /
• 1992

The polymeric compound [{$W(NO)_2Cl_2$}$_n$] were prepared by reductive nitrosylation of $WNaNO_2$ and acidified $WFeSO_4$ with $WWCl_6$ at room temperature. The reactions of [{$W(NO)_2Cl_2$}$_n$] with unidentate and bidentate ligands afforded neutral monomeric [$W(NO)_2Cl_2L_2$(or L-L)] in a relative high yields (70$\sim$90%). 3,5-lutidine, ${\gamma}$-cyanopyridine, 1,2-phenylenediamine, 1,10-phenanthroline, sym-diphenylethylenediamine, 9,10-phenanthrenequinone, 1,3-bis(diphenylphosphino)propane, 1,1'-bis(diphenylphosphino)ferrocene and 8-hydroxyquinoline were used as coordinating ligands. These dinitrosyltungsten complexes were characterized by elemental analysis, $^1H$-NMR, infrared, and UV-visible spectroscopy are reported. The spectral data indicated that geometric structures of the products were cis-dinitrosyl-trans-dichloro-cis-$L_2$ of $C_{2v}$ symmetry.

• Conservation Science in Museum
• /
• v.1
• /
• pp.15-26
• /
• 1999

More than 200 objects selected for the newly-opened Kimhae National Museum were treated for conservation. The objects which represent ancient Kaya culture, were mainly composed of metallic such as gilt bronze, silver, copper alloy and iron. The corrosion products on gilt bronze and copper alloy objects were preserved or removed according to their stability. Minimum treatment was done for preserving the original state of the objects. For silver objects and iron objects with silver-plate decorations, silver surfaces were revealed after treatment of corrosion products and treatments to prevent corrosion of silver and iron were done emphatically. For iron objects, which were stabilized, the original shape of objects was restored and acrylic coating was applied to prevent further corrosion. For the objects which were being corroded, 2-step de-chloride treatments were undertaken. The first step was immersing the objects in a solution of 0.3M sodium hydroxide and the second was the pressure de-chloride treatment using borax-distilled water. The main purpose of those treatments was to get rid of the causes of corrosion. Besides, conservation treatments for potteries, making of special mounting board for exhibition and amendment of various modeling were done too.