• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.162-163
• /
• 1999

• Resources Recycling
• /
• v.17 no.2
• /
• pp.46-54
• /
• 2008

It is well known that PCB (Printed Circuit Board) is a complex mixture of various metals. In this study, pyro-metallurgical process was investigated to extract valuable metallic components from the PCB scrap. PCB scrap was shredded and oxidized to remove plastic materials, and then, quantitative analysis were made. 15 mass %$Al_2O_3-45$ mass %CaO-40 mass %$SiO_2$ and 32 mass %$SiO_2-20$ mass %$Al_2O_3-38$ mass %CaO-10 mass %MgO, were chosen as basic slag compositions which are determined based on the quantitative analysis of PCB scrap. During experiments a super kanthal rotating furnace was used to melt and separate metallic components. Moreover the revolution effect on was the recovery of valuable metals from PCB scrap also investigated.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.161-164
• /
• 1979

The effect of acidity and the metal surface area of the Pd loaded zeolite catalysts; prepared from $Ca^{2+}-,\;La^{3+}-,\;NH_4^+-$exchanged Y and dealuminated HY was studied for the reaction of n-butane. The amount of strong acid site determined by the temperature programmed desorption of ammonia increased in the order NaY < CaY < LaY. Total amount of acid site decreased with increasing degree of dealumination, but the portion of strong acid site increased with increasing $SiO_2/Al_2O_3$ ratio. The effective metal surface area determined by the CO adsorption technique was large for those zeolite catalysts having strong acidity. It was found that conversion of n-butane was strongly dependent on the acidity and the effective metal surface area of the catalysts. The fact that the conversion of n-butane was proportional to the effective metal surface area suggests that the dehydrogenation by metallic component is the primary step in the reaction of n-butane.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1992

The process for recovery of acids and valuable metals such as nickel and chromium from the stainless-steel pickling acids has been developed vased on the use of solvent extraction technique. Until now, several processes for the treatment of waste acids were already developed in such countries as Japan, Swden and Canada. Those methods are, however, forcussed on the recovery of acids from them discarding the metals included in them as the hydroxides sludge. In the present work, the recovery of nickel and chromium in addition to nitric acid and hydrofluoric acid has been aimed so as to recycle them to the stainless-steel pickling lines and also to minimize the amount of sludge generated during the treatment of waste acids. The establishment of the process to recover the acids has been carried out based on the solvent extraction with TBP. The iron was eliminated from the waste solutions by precipitating in the form of hydroxide through the adjustment of pH with calcined limestone and the selective extration of chromium and nickel from the resultant solutions has been conducted by using D2EHPA as extractant.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.438-442
• /
• 2020

Studies on the recovery conditions and optimization process for valuable metal recovery through chemical treatment from detoxified asbestos-containing waste composed of calcium silicate, larnite, merwinite, and akermanite were conducted. The main components, Si, Ca, and Mg, of detoxified asbestos-containing waste (DACW) were separated and recovered in the form of SiO₂, CaSO₄, and Mg(OH)₂ compounds, respectively. Each separated component was confirmed through X-ray diffraction (XRD) and inductively coupled plasma spectrometer (ICP) analysis. The recovery conditions for each component were first treating them with an acid to separate SiO₂ and subsequently with H₂SO₄ to recover Ca in the form of sulfate, CaSO₄. The remaining Mg was recovered by precipitation with Mg(OH)₂ under strong basic conditions. This study suggested that it is possible to convert existing treatment process of asbestos waste by landfill through recovering the components into a resource-recycling green technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1642-1647
• /
• 2009

Changes in aerosol characteristics during 2006 ${\sim}$2008 Asian dust events in Cheoan were investigated by measuring mass, ion and elemental concentrations of fine and coarse particles. The average mass concentrations of daily TSP, PM10, PM2.5 were 214.9, 160.3, and 95.9${\mu}\;g/m^3$during Asian dust events, which were 3.08, 2.58, and 1.95 times higher than Non-asian dust events. The maximum concentrations of TSP, PM10, and PM2.5 were 850.1, 534.4, and 233.3${\mu}\;g/m^3$, which were 12.19, 8.60, and 4.76 times higher, respectively. Increases in ion concentrations were not significant during Asian dust events, but elemental concentrations including soil components such as Fe, Al, Ti increased by 17.1 and 43.4 times for fine and coarse particles, respectively. The results clearly indicate that metallic components from soil constituents were the major components in Asian dusts sampled at Cheonan.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.111.2-111.2
• /
• 2011

야금학적 방법을 통한 태양전지용 실리콘 제조를 위하여 아크로(Arc furnace)에서 제조된 용융 상태의 금속급 실리콘을 슬래그와 직접 반응시켜 불순물을 제거하는 공정에 관한 연구를 수행하였다. 이를 위해 아크로와 고주파 유도용해로(High-frequency induction furnace)를 이용하여 금속급 실리콘을 제조와 정련 특성 실험을 수행하였다. 본 연구에서 금속급 실리콘을 제조하기 위한 장비로 150kW급-DC 아크로와 300kW급-AC 아크로를 사용하였다. 원재료로 규석, 코크스(Cokes), 숯, 그리고 우드칩(Wood chip)을 실험 비율에 맞춰 아크로 내부에 장입하고, 이를 용융환원 방법을 통해 반응을 시켰다. 이때 생산된 금속급 실리콘의 순도는 약 99.2~99.8% 이었으며, 원재료의 순도, 장입 비율 및 아크로 운전 특성에 따라 편차가 있다. 아크로에서 생산된 금속급 실리콘의 경우 인(phosphorus), 붕소(boron)를 다량 함유하고 있고, 이를 제거하기 위하여 50kW급 고주파 유도용해로 장비를 사용하여 슬래그 정련 실험을 수행하였다. 슬래그 정련시 사용한 성분은 SiO2, CaO 그리고 CaF2 이며, 금속급 실리콘과 슬래그의 질량비 및 반응 시간에 따른 실리콘 불순물 특성을 평가하였다. 실험결과 인과 붕소는 각각 1 ppm 이하, 5 ppm 이하 였으며, 칼슘을 제외한 대부분의 금속 불순물의 경우 0.1~0.2% 임을 확인하였다.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.25-30
• /
• 2010

Leaching of CMSX-4 superalloy was done in hydrochloric acid solutions. The leaching behaviors of main alloy components, such as Ni, Co, Cr, Al, was investigated by controlling acid concentration, temperature, leaching time and pulp density. Increasing acid concentration enhanced the leaching rate till the rate decreased over 3 M acid concentration. Raising temperature increased the leaching amount of the metal components. After the leaching for 60 minutes at $90^{\circ}C$ and 10 g/L pulp density in 4 M acid solution, 93.2% nickel, 89.9% aluminum, 80.4% cobalt, and 79.1% chromium were leached. Nickel and aluminum were preferentially leached out, while the leaching rate of cobalt and chromium were relatively high only after 60 minutes, Increasing pulp density lowered the leaching rate and especially serious on cobalt and chromium, The optimum leaching condition for CMSX-4 was obtained at $90^{\circ}C$, 120 minutes, and less than 125 g/L in 4 M hydrochloric acid solution.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.45-53
• /
• 2005

Electro-generated chlorine leaching of waste printed circuit boards was investigated in hydrochloric acid solutions. Non-magnetic component of $0.6{\sim}1.2mm$ was prepared by grinding, magnetic separation, and sieving. The non-magnetic component of pulverized printed circuit board contained about 45% of metal component, in which copper was about 83.6%. The leaching rate of copper was greatly affected by current density and agitation speed. The leaching of copper up to 98% was achieved at $20mA/cm^2$, $50^{\circ}C$, 180 minutes, and 600 rpm in 1M HCl solutions. Increasing agitation and lowering current density enhanced utilization efficiency of electro-generated chlorine. Leaching of copper was suppressed at the initial stage, while the minor metal elements, such as aluminum, lead, and tin, were dominantly leached out.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.341-347
• /
• 1985

Formation of metal complex is the first step in the many biological actions of metal ions present in the biological systems. In this work the not electron affinity necessary for the formation of such metal complexes has been determined for a series of metal ions. It has been found that excess polarizing strength can be adopted as a measure of electron affinity and trend is the excess polarizing strength is related to Irving-Williams series. Those metal ions having greater than 0.22 in value of excess polarizing strength have been found to show carcinogenicity and other metal ions, which are supposed to be carcinogenic, have shows to have greater than 0. 22 in value of excess polarizing strength, demonstrating that excess polarizing strength could be used to determine if any metal ion possesses carcinogenic activity.