• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.343-343
• /
• 2001

최근 전자산업과 전파통신산업의 발달에 따라 불요전자파에 의한 전자파장해가 심각한 수 준에 이르게 되었다. 그 결과 국 . 내외 전자파환경은 나날이 악화되고 있으며, 이로 인한 사 회적 문제가 점차 증가되고 있는 실정이다. 이에 대한 대책으로 CISPR(Comite Internationale S Special des Perturbations Radioelectrique), FCC (Federal Communications Commissions) A ANSI(Amercian National Standards Institute) 둥이 주축이 되어 국제 규정이 제정되어 각종 전자기기들에 대해 방사(EMI) 및 내성(EMS)의 규제가 강화되고 있다. 그러나 국제규정이 요구하는(30 MHz - 18 GHz) 주파수 범위에서의 EMIjEMS 측정을 하기 위해 광대역(Broad-band) 전파무향실(Anechoic Chamber)이 필요하지만1 기존의 Ferrite T Tile 또는 그리드형 전파홉수체는 20 dB 이상 전파를 홉수할 수 잇는 주파수 대역이 30 M MHz - 400 MHz 또는 780 MHz에 불과하기 때문에 상기의 조건을 만족하는 전파무향실 을 구성하기에는 곤란한 실정이다. 본 논문에서는 국제 규격을 만족하는 전파무향실을 위한 광대역 전파홉수체를 개발하기 위해, 다충형으로 구성하고, 전파흡수체의 형상을 변화시켜 등가재료정수법을 사용하여 설계하고 그 특성을 평가함을 그 목적으로 하였다. 따라서 본 논문에서는 본 연구실에서 기폰에 제안한바 있는, 금속판 위에 타일형 페라이 트 충, 그 위에 원추절단형 페라이트 층과 원통형 페라이트 층을 적층시칸 형상의 전파홉수 체는 30 MHz - 6 GHz 정도까지 커버할 수 있으나, 1 GHz 부근의 주파수 대에서 16 dB 정도의 홉수능 밖에 가지지 못하였다. 이를 개선하기 위해, 금속판 위에 타일형 페라이트 층 을 형성하고 그 위에 원통형 페라이트 충, 원추절단형 페라이트 충I 원통형 페라이트 충, 타 원형 페라이트 충을 형성한 새로운 형태의 전파홉수체를 제안하였다. 본 논문에 제안한 새로운 형태의 전파흡수체의 시물레이션 결과 30 MHz - 20 GHz의 주파수 범위에서 전반적으로 25 dB이상의 전파흡수능을 가짐을 확인하였으며/ 특히 기폰에 제안한 전파홉수체와 비교하면,1GHz 부끈에서의 전파홉수능을 10 dB 이상 개선하였다. 나아가서/ 실재로 제작한 전파흡수체의 측정된 주파수특성이 시율레이션에 의한 이론치와 3 30 MHz - 6 GHz의 범위에서 잘 일치함을 확인하였다. 또한y 전파 홉수체의 전체 높이는 2 27 mm 밖에 되지 않으므로 본 연구에서 제안한 전파 홉수체를 사용할 경우 전파무향실의 유 효공간 확보에 매우 유리한 이점을 가진다

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.5
• /
• pp.117-124
• /
• 2020

This study examined ornamental metals used as architectural members among metal artifacts excavated from ancient Buddhist temples and palaces in Korea. Through this, we approached the decorative characteristics of ancient architecture eaves. 1. The decorations used in eaves of Korean ancient architecture include roof-end tiles and ornamental metal. Through excavation examples, the technique of attaching ornamental metal to the rafters and corner rafters of high-ranking architectures in the 7th and 8th centuries (ornamental metal for rafter end, ornamental metal for corner rafter end), and tosu iron in the 10th century It seems to be fashionable. 2. Several buildings were built in ancient Buddhist temples and palaces. At this time, they differentiated ornamental metal according to the hierarchy of the building. The higher the hierarchy, the greater the difference in the number of ornamental metal installations, materials, and decoration techniques. In addition, ornamental metal used in eaves is an important factor in the discrimination of the times as the type, number of members, and patterns change depending on the era. 3. The great feature of the eaves metal decoration excavated in the 7th and 8th centuries is the attachment of ornamental metal to the rafters and horsetails. This seems to create a sense of grandeur by removing the weight of the roof and giving the impression constructed regardless of gravity by supporting it with non-material materials.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.821-827
• /
• 2023

In this study, the aircraft technical standards of the Korea and the United States were analyzed to derive the dynamometer test procedure required to prove the compatibility for flight test certification of the metal brake pad for transport aircraft. Since the design modification of the brake systems is classified as a major change, the STC(Supplemental Type Certificate) and the PMA(Parts Manufacturer Approval) are required. In accordance with the TSO-C135a, the technical standard order for brake system in the United States, the design landing-stop test, accelerate-stop test, and most severe landing stop test were selected among the test items for flight test. The conditions for the dynamometer test are determined according to the specifications provided by aircraft manufacturer, and the brake pad condition, deceleration, and the number of test are defined according to the TSO-C135a.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.3
• /
• pp.211-216
• /
• 2008

Purpose: The frequency of foreign body in the knee joint is not as high, but it sometimes required wide or multiple arthrotomy in order to remove, which can baffle the surgeon in some ways. Our study is to evaluate for effectiveness of arthroscopic retrieval for intra-articular foreign body in the knee joint. Materials and Methods: The 22 patients(16 males, 6 females) had received arthroscopic foreign body retrieval in the knee joint from March 1983 to September 2006. The causes of foreign bodies of the knee joint were 7 of trauma (31.9%) related cases, 13 of surgery related cases (59.0%), 2 found during follow up after operation (8.1%) in pathologies of foreign body. Results: There were 15 of metal showed the most percentage (68.1%), 7 of non-metal (31.9%) in types of foreign bodies, and others included bullet, suture material, pencil lead, broken wire etc. All cases were used by arthroscopic techniques. All foreign bodies were removed easily and were showed no complication such as postoperative joint stiffness. Conclusion: Arthroscopic foreign body retrieval in the knee joint is effective surgery in terms of easy access to foreign body and less postoperative complication.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.52-63
• /
• 2004

This study tries to investigate the differences in combination of gold and other metals used in the surface guilt of the gold-guilt relics found in the Seonwonsa Temple of the Korea Dynasty. Our findings are as follows. The gilded roller knobs found in the Seonwonsa Temple of the Korea Dynasty can be classified into three groups by the color of the surface guilt: gold, white-gold, red-gold. By the color it is found that gold type contains $Au\;81.0\%,\;Ag\;3.5\%,\;Cu\;5.6\%$, white-gold type contains $Au\;82.1\%,\;Ag\;10.6\%,\;Cu\;2.4\%$, and the red-gold type contains $Au\;59.9\%,\;Ag\;3.7\%,\;Cu\;33.2\%$. The gold metal used for guilt is found to be amalgam of Hg and the depth of the guilt was uneven with the average of $2.5\~25{\mu}m$. These gilded roller knobs were produced in two methods. One of them was made out of pure bronze, and the other out of bronze veneer and led. Since we found led on the outer surface, we conclude that the led juncture was later guilt with gold.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.111-122
• /
• 2014

In Bongseon-ri site, the central type and the local type of the Baekje tombs co-exist together. Many swords with ring pommel which to regional leaders in Seocheon the Beekje government granted are excavated from these tombs. These represent that the regional leaders were controlled by the Baekje government gradually. Four swords with ring pommel and one simple sword are investigated metallurgically and we seek what swords have a function of weapon or what sword produce for grave goods. The simple sword is made by solid carburizing technology and quenching of heat treatment so it's possibly used as a weapon. In contrast, four swords with ring pommel has little chance of weapon because the blade of swords consists of microstructure that have low hardness and the back of swords don't have microstructure can absorb the shock. The most identical characteristic of the simple sword and swords with ring pommel is that they are possible to classify clearly into practical/non-practical tools. Additionally, according to non-metallic inclusion analysis result of these swords, w$\ddot{u}$stite and glass phase are found together. Thus, it is able to say that reduction method in low temperature is applied during smelting process.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.237-244
• /
• 2013

The engine oil is used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in korea. It can cause to raise environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator characteristics, total acid number, four-ball test and concentration of metal component for fresh engine oil and used engine oil after real vehicle driving (5000 km, 10000 km). The result showed that the total acid number, wear scar diameter by four-ball test, Fe and Cu had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000km) had similar physical values and concentration of metal component.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.23-27
• /
• 2017

This paper proposes an approach to predict the reliability of high temperature heaters by identifying their primary failure modes and mechanisms in the field. Test specimens were designed to have the equivalent stress conditions with the high temperature heaters in the field in order to examine the effect of stress conditions on the solder joint failures. There failures often result from cracking due to intermetallic compound (IMC) or void formation within a solder joint. Aging tests have been performed by exposing the test specimens to a temperature of $170^{\circ}C$ in order to reproduce solder joint failures in the field. During the test, changes in IMC formation were investigated by scanning electron microscopy (SEM) on the cross-sections of the test specimens, while changes in void formation were monitored both by resistance spectroscopy and by micro-computed tomography (microCT), alternately. The test results demonstrated the void volume within the solder increased as the time at the high temperature increased. Also, the phase shift of high frequency resistance was found to have high correlation with the void volume. These results implied the failure of high temperature heaters can be non-destructively predicted based on the correlation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.250-250
• /
• 2013

단일벽 탄소나노튜브(Single-walled nanotubes, SWNTs)는 나노스케일의 크기와 우수한 물성으로 인하여, 전자, 에너지, 바이오 분야로의 응용이 기대되고 있다. 특히 SWNTs의 직경을 제어하게 되면 튜브의 전도성 제어가 훨씬 수월하게 되어, 차세대 나노전자소자의 실현을 앞당길 수 있으며 이러한 이유로 많은 연구들이 현재 행해지고 있다. SWNTs의 직경제어 합성을 위해서는 현재 열화학기상증착법(Thermal chemical vapor deposition; TCVD)이 가장 일반적으로 이용되고 있으며, 합성 촉매와 합성되는 튜브의 직경과의 크기 연관성이 알려진 후로는, 촉매의 크기를 제어하여 SWNTs의 직경을 제어하고자 하는 연구들이 활발하게 보고되고 있다. 특히, 촉매 나노입자의 직경이 1~2 nm 이하로 감소될 경우, SWNTs의 직경 분포가 어떻게 변화할 것인지가 최근 가장 중요한 관심사로 남아 있으나, 이러한 크기의 금속입자는 나노입자의 융점저하 현상이 발현되는 영역이므로, SWNTs의 합성온도 영역에서 촉매 금속입자는 반액체(Semi-liquid) 상태로 존재할 것으로 추측하고 있다. 본 연구에서는 고온의 SWNTs 합성환경에서 금속나노촉매의 유동성을 제한하기 위하여 나노사이즈의 기공이 규칙적으로 정렬된 다공성 물질인 제올라이트를 촉매담지체로 이용하였고, 이 때 다양한 합성변수가 SWNTs의 직경에 미치는 영향을 살펴보고자 하였다. SWNTs의 합성을 위해 실리콘 산화막 기판 위에 제올라이트를 도포한 후, 합성 촉매로서 전자빔증발법을 통하여 수 ${\AA}$에서 수 nm 두께의 철 박막을 증착하였다. 합성은 메탄을 원료가스로 하여 TCVD법으로 실시하였다. 주요변수로는 제올라이트 종류, 증착하는 철 박막의 두께, 합성온도를 설정하였으며, 이에 따라 합성된 SWNTs의 합성수율 및 직경분포의 변화를 체계적으로 살펴보았다. SWNTs의 전체적인 합성수율의 변화는 SEM 관찰결과를 이용하였으며, SWNTs의 직경은 AFM 관찰 및 Raman 스펙트럼의 분석에서 도출하였다. 실험결과, 제올라이트 종류에 따라서는 명확한 튜브직경 분포의 변화 없이 비교적 좁은 직경분포를 갖는 SWNTs가 합성되었으며, 합성온도가 $850^{\circ}C$ 이하로 감소되면 합성수율이 현저히 감소되는 것을 알 수 있었다. 촉매박막의 두께가 1 nm 이상인 경우에서는 직경 5 nm 전후의 나노입자가 형성되었으며, 이때 SWNTs의 합성수율은 높았으나 다양한 직경의 튜브가 합성이 된 것을 확인할 수 있었다. 반면, 촉매입자의 크기가 2 nm 이하에서는 합성수율은 다소 저하되었으나, SWNTs의 직경분포의 폭이 상대적으로 훨씬 좁아지는 것을 알 수 있었다. 추후, 극미세 촉매와 저온합성 환경에서의 합성수율 향상을 위한 합성공정의 개량이 지속적으로 요구된다.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.590-605
• /
• 2021

The history of printing technology in Korea is studied by investigating existing ancient documents and records and comparing accumulated data and knowledge. Cultural property research requires non-destructive testing and observation with the naked eye or aided by a microscope. Researchers' experience and knowledge are required even though they cannot guarantee the outcome. For ancient documents and records that are presumed to consist of woodblock printing, wood type printing, metal type printing, or their combinations, each researcher draws various opinions and conclusions. This often causes confusion and divides the opinions of ordinary citizens and field specialists. Among them, the criteria for judging ancient documents or books printed using woodblock and metal movable material are ambiguous. Academic research on the development history of printing technology in ancient Korea has been stagnant, and conflicts among researchers have also erupted. Involvement of national investigative agencies not specialized in cultural properties has exacerbated the situation. In this study, we investigated printing characteristics that are likely to serve as more objective judgment criteria by quantitatively analyzing the experiments of retrieving several sheets of Korean paper (Hanji) using a replicated Hunminjeongeum (訓民正音) woodblock and quantitatively analyzing the images of the printed papers. In addition, the validity and questions for the typical phenomena presented as a method for distinguishing between woodblock and metal print are reviewed. We investigated the possibility of developing new objective judgement criteria through quantitative analysis using image analysis and investigating the printing characteristics of Korean paper through a reproduction experiment of woodblock printing.