• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.145-146
• /
• 2009

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.181-191
• /
• 2015

The Bakseok of Geunjeongjeon Hall in Gyeongbokgung Palace is platy floor stone acting as drainage, protected glaring and sliding. The Bakseoks were composed of anisotropic medium-grained biotite granite with a weak myrmekitic texture. Interpretation of transportation process for the Bakseok and original granite provenance trace of and analyze of identity based on ancient writings and detail field survey. As a result, the very similar granite with the Bakseok in lithology, composition mineral, texture and geochemical characteristics was found around Mt. Nakgasan in the Seokmodo Island. There were interpreted stonework process of the Bakseok used exfoliation granite dome with physical weathering properties in Seokmodo Island, to get platy stone economically stonework at the state level as a minimized on burden of supply and men power.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.03a
• /
• pp.28-28
• /
• 2003

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1164-1171
• /
• 2009

This paper proposes an efficient implementation way of traditional wooden building using Parametric modeling method which uses the relations of numerical value ratio between building materials. Building structures and order of construction for Geunjungjeon of Kyuungbok Palace is digitally implemented proving the efficiency of the suggested proposal. Although the existing digital modeling methods for traditional wooden building emphasize the exterior modeling of the building, our modeling method constructed numerous wooden materials and arranged those pieces orderly so that people can see the interior structures of the building which usually is beyond one's vision. The suggested Parametric modeling method, Multi-Object Texture Mapping, Physical Camera Restoration, and GI Renderer for implementing Geunjungjeon of Kyuungbok Palace can be practically used for digital implementation for other traditional wooden buildings.

• 한국문화재보존과학회:학술대회논문집
• /
• 2002.02a
• /
• pp.12-20
• /
• 2002

The analysis of danchung pigments at the Geunjeongjeon Hall in the Gyeongbokgung Palace were carried out by EXRF and MXRD. The analytical results showed that mineral pigments were employed for the inside of the Geunjeongjeon Hall. The main ingredients of green pigments were chalcanthite and celadonite. Red pigment was cinnnabar. It was also revealed that synthetic pigments were applied for the outside of the Hall. Yellow pigment was chrome yellow. The main ingredients of red pigments were red lead and hematite. Green pigments were emeral green and chrome green. Lazurite was employed for blue pigment and titanium dioxide for white one.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.67-73
• /
• 2002

The carbon-in-ash system for simultaneously monitoring the unburned carbon in fly ash produced in a coal-fired power plan is designed and evaluated using the domestic fly ash produced in the coal-fired power plant. Real time monitoring is very important to control the combustion of the boiler in the coal-fired power plant and the purification system for fly ash recycling. The carbon-in-ash system based on the capacitance measurement consists of a LCR meter, a duct collector and an electrode cell. The capacitance of fly ash increases linearly with increasing fly ash carbon contents. The water content in fly ash plays an important role on the ash capacitance. The empirical equation for predicting the content of unburned carbon in fly ash produced in the domestic Boryung, Hadong and Samchenpo coal-fired power plants can be derived in the range of carbon content 0-20%.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.88-95
• /
• 2004

The purpose of this study is to identify the species of wood members used in the Keunjungjeon Hall, main building of the Kyungbok palace in Seoul. The total 144 samples consist of 52 from pillars and 92 from other wood members. Only two species were identified, which were Abies holophylla Max. (needle fir) and Pinus densiflora Sieb. et Zucc. (Japanese red pine). For the pillars, A. holophylla were more abundantly used than P. densiflora. Among 20 outer pillars ('Pyeongju'), 11 were A. holophylla, and 9 were P. densiflora. Among 12 inner pillars ('Naejinkoju'), 7 were A. holophylla, and 5 were P. densiflora. Among 4 inner corner pillars ('Gwikoju'), 3 were A. holophylla and 1 was P. densiflora. For 92 other wood members, only 2 purlins were A. holophylla and the others were all P. densiflora. The results suggest that the common opinion 'Palace buildings of Korea are made from red pine woods' should be corrected. We think that fir logs might be used for the pillars instead of pines because long and straight pines were not available during 1860s due to heavy utilization of pines as construction and fuel materials in the late Chosun period.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.269-276
• /
• 2008

Recently, the concerning about cultural heritages has been increased. As a result, the protection, repairing and restoration of cultural assets have been actively in progress. The biggest project of cultural asset reconstructions is the restoration of Kyungbok Palace and it has been in proceed step by step since in 1989. The actual sizes of these traditional buildings have been measured and recorded for future maintenance. In this paper, the 3D computer graphic technique is used to help understanding the inner structures of the traditional buildings as well as their construction processes. In other word, the construction simulation of Keunjeongjun which is the center building of Kyungbok Palace have been produced using 3D computer graphic techniques. The purpose of this project is aiding people in understanding the process of traditional palace architecture in Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.187-187
• /
• 2010

현대의 전기전자 기술의 발전속도가 급격히 빨라짐에 따라서 디지털 전자기기는 많은 데이터와 빠른 전송속도가 요구되어지고 있으며 이로 인해 예상치 못한 고주파 노이즈 신호의 문제가 심각해지고 있다. 최근 디지털 전자기기 중 디스플레이 표시장치에서 구동전압 인가 시 발생하는 근역장 방사노이즈가 문제가 되고 있고, 정전용량방식 (Capacitive Overlay)Touch Pannel에서 터치 시 오작동을 일으키는 EL 면광원의 EMI(Electro-Magnetic Interference, 전자방해)가 본 연구에서 해결하고자 하는 문제이다. EL 면광원의 구동전압이 증가함에 따라서 Touch Panel에 인가되는 근역장 방사노이즈의 세기를 측정하였고 근역장 방사노이즈를 감쇄할 수 있는 Flexible한 자성복합시트에 대해서 연구하였다. EL Display Pannel에 Flexible한 자성 복합시트를 채용하여 Flexible Display 장비의 근역장 방사노이즈 감쇄에 효과가 있음을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.870-873
• /
• 2004

본 논문에서는 여러 산업의 전원계통에서 정전 및 순간정전 등의 사고로 발생할 수 있는 피해를 예방하는데 중요한 역할을 하고 있는 무정전전원공급장치(UPS: Uninterruptible Power Supply)의 인터넷 감시시스템에 대하여 기술한다. 별도의 네트워크 인터페이스장치를 설치할 필요가 없이 UPS를 인터넷에 직접 연결할 수 있도록 개발한 임베디드 시스템(Embedded System)의 하드웨어 구성과 다양한 네트워크 통신 프로토콜을 구현할 수 있도록 설계된 소프트웨어의 구성 및 특징을 설명하고, 인터넷에 연결된 UPS의 고장을 예방하거나 신속하게 처리할 수 있도록 개발하여 사용 중인 EMS(Ehwa Management Service)의 특징을 기술한다. 또한 EMS 서버를 이용하지 않고 간단하게 웹브라우저를 통해 감시할 수 있도록 Java 기술을 이용하여 구현한 웹감시프로그램에 대해서 기술한다.