• 제목/요약/키워드: 근접 밀도

Search Result 152, Processing Time 0.025 seconds

Evaluation of Absorbed Dose According to the Gold Nanoparticle Density in Prostate Cancer Brachytherapy (전립선암의 근접치료 시 금 나노입자 밀도에 따른 흡수선량평가)

  • Lee, Deuk-Hee;Kim, Jung-Hoon
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.2
    • /
    • pp.247-252
    • /
    • 2019
  • This study was evaluated absorbed dose according to the gold nanoparticle density in prostate brachytherapy which was constantly occurred in Korean men. Absorbed dose evaluation was using MCNPX program which was applied Monte Carlo simulation. Source were applied $^{192}Ir$ which was temporary insertion source and $^{103}Pd$ which was permanently insertion source. And gold nanoparticle density was applied 0 mg, 7 mg, 18 mg and 30 mg. The prostate absorbed dose was increased in proportion to the density 2.95E-14 Gy/e to 4.42E-14 Gy/e in $^{192}Ir$ and showed the same tendency in $^{103}Pd$. And surrounding organ absorbed dose was inversely proportional to the density. Therefore using nanoparticle in brachytherapy was increased therapeutic ratio.

Optical & electrical induced nano-scale photo-darkening effect on non-oxide thin film and near-field data-storage (광/전기로 유도되는 광 암색화와 근접장 정보저장)

  • 송기봉;김은경;김준호;이성규;박강호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.264-265
    • /
    • 2003
  • 광 회절한계를 극복한 기록밀도 향상 기술로 대두된 근접장 응용 정보저장기술은 차세대 광 정보저장의 핵심기술로 간주되고 있다. 근접장을 응용한 기술에는, 근접장 헤드구조의 관점에서, 근접장 효과 렌즈(SIL), 탐침형, 미소구멍레이저, 안테나 구조 등 나노크기 Aperture를 가지는 구조 등이 있다. 그러나 각각의 근접장 헤드구조에 적합한 특히, 탐침형 근접장 방식에 적합한 근접장 매체에 대한 활발한 연구는 아직 진행되고 있지 않다. (중략)

  • PDF

Cluster Merging Using Density based Fuzzy C-Means algorithm (밀도 기반의 퍼지 C-Means 알고리즘을 이용한 클러스터 합병)

  • 한진우;전성해;오경환
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2003.05a
    • /
    • pp.235-238
    • /
    • 2003
  • Fuzzy C-Means(FCM) 알고리즘은 초기 군집 중심의 개수와 위치에 따라 군집 결과의 성능차이가 많이 나타난다. 하지만 일반적인 경우에 군집 중심의 개수는 분석가의 주관에 의해 결정되고, 임의적으로 결정되기 때문에 원래 데이터의 구조와는 무관하게 수행되어 최적화된 군집화 수행을 실행하지 못하는 경우가 발생하게 된다. 따라서 본 논문에서는 원래의 데이터의 구조에 좀더 근접한 퍼지 군집화를 수행하기 위하여 격자를 바탕으로 한 데이터의 밀도를 이용한 FCM을 제안하고, 이러한 밀도 기반 FCM에 의해 결정된 군집의 합병 기법을 제안하였다. N-차원의 데이터 공간을 N-차원의 격자로 나누고, 초기 군집 중심의 개수와 위치는 각 격자의 밀도를 바탕으로 결정된다. 초기화 이후에 각 격자 내부에서 FCM을 이용하여 군집화를 수행하고, 계속해서 이웃 격자의 군집결과에 대하여 군집간의 유사도 측도를 이용하여 군집 합병을 수행함으로써 데이터의 자연적인 구조에 근접한 군집화를 수행하였다. 제안된 군집화 합병 기법의 향상된 성능은 UCI Machine Learning Repository 데이터를 이용하여 확인하였다.

  • PDF

A Study of Development for Korean Phonotactic Probability Calculator (한국어 음소결합확률 계산기 개발연구)

  • Lee, Chan-Jong;Lee, Hyun-Bok;Choi, Hun-Young
    • The Journal of the Acoustical Society of Korea
    • /
    • v.28 no.3
    • /
    • pp.239-244
    • /
    • 2009
  • This paper is to develop the Korean Phonotactic Probability Calculator (KPPC) that anticipates the phonotactic probability in Korean. KPPC calculates the positional segment frequecncy, position-specific biphone frequency and position-specific triphone frequency. And KPPC also calculates the Neighborhood Density that is the number of words that sound similar to a target word. The Phonotactic Calculator that was developed in University of Kansas can be analyzed by the computer-readable phonemic transcription. This can calculate positional frequency and position-specific biphone frequency that were derived from 20,000 dictionary words. But KPPC calculates positional frequency, positional biphone frequency, positional triphone frequency and neighborhood density. KPPC can calculate by korean alphabet or computer-readable phonemic transcription. This KPPC can anticipate high phonotactic probability, low phonotactic probability, high neighborhood density and low neighborhood density.

Dynamic Estimation of Travel Time by Block Density Method (블록밀도법을 이용한 동적통행시간 예측)

  • 정헌영
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10a
    • /
    • pp.3-10
    • /
    • 1998
  • 본 연구에서는 동적통행시간예측을 위한 하나의 방법으로 블록밀도법을 도입하여 가로상의 일정한 구간을 세분화하고 몇 개의 블록으로 분할한 후 교통류를 유체근사화시키고 각 블록의 밀도를 일정시간 마다 갱신해 나가는 방법을 채택하였다. 즉, 각 블록에서 주어진 밀도의 초기치와 최하류부의 블록에서 유출교통량을 이용하여 일정시간 간격으로 모든 블록에서의 밀도를 수정해 가는 유체의 연속방정식의 개념을 도입하였다. 또한, 본 연구에서는 첨단교통시스템에 적용될 동적통행시간 예측을 위해 기존의 연속교통류만을 대상으로 하던 것에서 벗어나 신호등을 포함한 단속교통류를 대상으로 하였다. 또한 교통류의 저밀도 구간과 고밀도 구간을 분리하여 Ele복합모형을 적용하여 교통류를 해석하고 가급적 실제 상황과 유사하게 근접시키고자 하였다. 이 이론을 근거로 구축된 모델에 실제 현장에서 얻어진 교통량, 밀도, 속도 등의 자료들을 투입하고 통행시간의 예측을 도모하였다.

  • PDF

부유성 HNS의 근접영역의 확산 특성에 대한 수치해석

  • Go, Min-Gyu;Jeong, Chan-Ho;Lee, Mun-Jin;Jeong, Jeong-Yeol;Lee, Seong-Hyeok
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2017.11a
    • /
    • pp.162-163
    • /
    • 2017
  • 해양 HNS(Hazardous and Noxious Substances)의 유출 사고 시, 막대한 인명 피해와 환경 훼손을 피하기 위해 유출 사고 조기 예측과 정확한 확산 경로를 예측하는 것이 필수적이다. 본 연구의 최종목적은 전산유체역학을 이용하여 HNS사고가 발생하였을 때 위험구역을 적절히 예측할 수 있는 수치해석기법을 개발하고, 다양한 해양사고조건과 환경영향을 고려하여 근접역에서의 2차원 확산 특성을 고찰하고 확산 현상을 예측하기 위한 모델을 개발하는 것이다. 본 연구에서는 상용코드인 ANSYS FLUENT(V. 17.2)을 사용하여 근접역에서의 2차원 확산특성을 모사하고 분석하였다. 특히, 누출된 HNS의 위치별 농도를 예측하기 위해 종수송방정식(Species Transport Equation)을 이용하였으며 RANS(Reynolds-Averaged Navier-Stokes) 방정식과 표준 $k-{\varepsilon}$ 모델을 이용하여 난류유동을 모사하였다. 해석된 결과는 문헌에서 얻어진 실험데이터와 상호비교하였으며 해수의 유속, HNS의 밀도에 따른 유층 두께, 해수면 HNS 평균 농도 그리고 HNS 전파 속도를 분석하였다. 유층 두께는 해류 유속에 따라 변화하며 변화 경향에 따라 두 구간으로 나눌 수 있다. 해류 전파 속도는 대체로 해류 유속과 선형적 비례관계를 갖는 것으로 나타났다. 해수면 평균 HNS 농도는 해류 유속에 선형적으로 비례하여 감소하며, HNS 밀도가 큰 경우 해수면 평균 HNS 체적 농도는 더 빠르게 감소하게 된다. 이러한 결과는 HNS 확산 특성을 분석하고 관련된 예측모델을 개발하는 데에 기여할 수 있다.

  • PDF

Evaluation of Absorbed Dose According to Nanoparticle Density During the Breast Cancer Brachytherapy (유방암 근접치료 시 나노입자의 밀도에 따른 흡수선량 평가)

  • Lee, Deuk-Hee;Nam, Ji-Hee;Kim, Jung-Hoon
    • Journal of radiological science and technology
    • /
    • v.42 no.2
    • /
    • pp.131-135
    • /
    • 2019
  • The purpose of this study was to evaluate the efficacy of brachytherapy of breast cancer by dose assessment which a steady increased in Korea women. The dose assessment was performed using the MCNPX program, a MonteCarlo simulation technique. The sources used for brachytherapy was 192Ir. And nanoparticle which used for dose enhancement was gold. The density of nanoparticle was 7, 18 and 30 mg. Evaluation of absorbed dose according to distance is measured at a distance of 30, 50, 100 and 200 cm from the patient. As a result, The breast absorbed dose results increased in proportion to the density of nanoparticle. And the surrounding organs were not significantly different according to the density. But, in some organs, the absorbed dose decreased as the density of nanoparticles increased. Absorbed dose according to the distance was in inverse proportion to distance.

Population growth and vermicomposting rate of earthworm (Eisenia fetida) according to amounts of feed supply and initial densities of earthworm populations (줄지렁이(Eisenia fetida) 입식 밀도 및 먹이 급이량에 따른 지렁이 개체군 생장 및 먹이 섭식효율)

  • Bae, Yoon-Hwan;Park, Kwang-Il
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.14 no.4
    • /
    • pp.104-112
    • /
    • 2006
  • Population growths of earthworm were investigated when the earthworm populations with different levels of initial densities per unit area were fed with cow dung mixed with paper mill sludge. The tested levels of earthworm densities were as follows; $1kg/m^2$, $2kg/m^2$, $3kg/m^2$, $5kg/m^2$. There were no significant differences in population growth rates 60 and 90 days after feed supply among the tested densities of earthworm. Therefore, it was suggested that initial densities of earthworm populations per unit area higher than $3kg/m^2$ should not be favorable because of the cost for purchasing earthworm. Vermicomposting rates of earthworm on feed were also investigated when different amounts of feed were supplied repeatedly to unit area of nursery bed with $5kg/m^2$ of initial densities earthworm populations. The tested amounts of feed at each supplying time were as follows; $16kg/m^2$, $24kg/m^2$, $32kg/m^2$, $40kg/m^2$. The more the amount of feed at each supplying time, the higher vermicomposting rate and population growth rate. Therefore, it should be more favorable for earthworm breeders to supply more than $40kg/m^2$ of feed at each supplying time, because it would reduce time and labor cost.

  • PDF