• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.78-84
• /
• 2010

The efficiency of system with a built-in coil is improved as (1) the total coil flux increases, (2) the space distribution of coil flux is closer to the sinusoidal wave and (3) the direction of coil flux flow becomes more inherent with the original direction at the same condition. Every turn RC(Reinforced Coil) is composed of OC having original region and two IC's strengthening bidirectionally the inner part flux in order to maintain the symmetry with origin. This way we will realize the inherent flux direction and the sinusoidal closeness as well. Accordingly RC type is obtained by connecting the pure OC's and RC's in just turns to be closer to sinusoidal flux wave. We proved experimentally the usefulness of reinforced coil to improve the efficiency of SPIM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.93-96
• /
• 2015

The aim of the estimation of disparity map is to find the corresponding pixels from similar two or more images. However, it is a difficult problem to get precise and consistent disparity under a variety of real world situations. In other words, the color values of stereo images are easily influenced by radiometric properties such as illumination direction, illumination color, and camera exposure. Therefore, conventional stereo matching methods can have low performances under radiometric conditions. In this paper, we propose an approaching of disparity map estimation that is reliable in controlling various radiometric variations close to the real environment. This method is motivated by following constancy. Even though each other has different radiometric property in stereo images, intensity of pixels of object have general constancy in specific block. Experimental results show that the proposed method has better performances compared to the comparison group under different radiometric conditions between stereo images. Consequentially, the proposed method is able to estimate the disparity map in stable under various radiometric variations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.84-92
• /
• 2002

A size of low-voltage conductor cables is determined by the voltage drop of a system the cable impedance and the cable ampacity based on temperature correction factor in accordance with the condition of cable installation. Therefore, the proper temperation correction factor according to the condition of cable installation should be applied to determining the cable ampacity and also the skin effect and proximity effect, along with the kind and size of conductor and the condition of cable installation, should be properly considered to analyze the proper value of resistance and the reactance of the conductors. This paper addresses the systematic design flow for determining the size of low voltage level con여ctor cables in calculating the voltage drop of a power system and proposes a new improved the calculating formula what error should be minimized in comparison with the general formula and which can be applied in design work for determining the size of conductor cables.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.118-124
• /
• 2009

In order to know the range of install possibles of the horizontal stay without general stay, strength characteristic tests were performed for the Vertical and 80[$^{\circ}$] inclined concrete poles. From the results of one cycle strength tests, the safety factors were 2.8, 2.5 and 2.1 for the poles of general load, heavy load and high strength load, respectively. However, the crack was occurred when the bending bounds of upper part of pole was above 2[$^{\circ}$], and working load was similar to the rated load of pole at this time. Therefore, it could be concluded that the reinforcement by the installation of the stay and the support was necessary certainly, if the bending bounds of pole, which was installed on a solid foundation, are above 2[$^{\circ}$].

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.100-108
• /
• 2008

The transient ground impedance depending on configuration, size, and material of grounding electrodes as well as the shapes of impulse currents, has a significant affect on the performance of the grounding system. This paper presents experimental results in regard to the analysis method of transient ground impedance using the lightning impulse and variable frequency currents. Also a new estimation method to replace the effective surge impedance for transient ground impedance was proposed. The ground electrodes used in this experiment are virtual ground electrodes including both resistance and inductance components, carbon ground electrode with 1[m] length, copper electrode with 9[m] length and counterpoise with 40[m] length. Ground impedances using the proposed method were measured respectively. Comparing with the ground impedance using variable frequency current the conventional ground impedance($Z_1$) calculated from the peak values of impulse voltage and impulse current is observed more correct method for evaluating the performance of ground electrode than the effective surge impedance.

• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.121-125
• /
• 2020

People counting has always been a method of interest for maximizing energy saving by identifying the congestion level or amount of use of a specific facility to efficiently manage the facility, or automatically implementing a power saving function by identifying the number of people entering and exiting a specific place such as a toilet. The method of counting people by image processing is very expensive and has the disadvantage of being severely affected by the surrounding environment of the lighting. In the case of the area sensor, there is a disadvantage of counting as one person when the number of people passes close with arms folded. In order to solve the existing method, which is expensive, affected by lighting, or inaccurate the number of people in certain cases, this paper proposes a new method of counting people using the principle of LiADAR. Accurate counting of the number of people entering the hospital will help manage hospital facilities, but it will also help to establish effective quarantine measures at the present time when Corona 19 is prevalent.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.365-372
• /
• 2012

Purpose: To investigate ocular higher order aberrations (HOA) and spherical aberration changes caused by an aspheric soft contact lens designed to reduce spherical aberration (SA) of the eye. Methods: Fifty subjects who have successfully experienced soft contact lenses were refitted with aspheric design (Soflens Daily Disposable: SDD, Bausch+Lomb) soft contact lens. Ocular higher order aberrations (HOA) and stand alone SA were measured and analyzed for a 4-mm pupil size using Wave-Scan Wavefront$^{TM}$ aberrometer (VISX, Santa Clara, CA, USA). High and low contrast log MAR visual acuity and contrast sensitivity function (CSF) were also measured under photopic and mesopic conditions (OPTEC 6500 Vision Tester$^{(R)}$). All measurements were conducted monocularly with an undilated pupil. Results: The RMS mean values for total HOA with SDD contact lenses were significantly lower than those at with unaided eyes (p<0.001) and a reduction for SA in the SDD was close to the baseline SA (zero ${\mu}m$) (p<0.001). For the SDD lens, there was a statistically significant correlation between the changes in the total HOA and the contact lens power (r=0.237, p=0.018) as well as between the changes in SA and the lens power (r=0.324, p=0.001). High contrast visual acuity (HCVA) and low contrast visual acuity (LCVA) with SDD lenses were $-0.063{\pm}0.062$ and $0.119{\pm}0.060$, respectively under photopic and $-0.003{\pm}0.063$ and $0.198{\pm}0.067$, respectively under mesopic condition. Contrast Sensitivity Function (CSF) with SDD lenses under both photopic and mesopic conditions was $3.095{\pm}0.068$ and $3.087{\pm}0.074$, respectively. Conclusions: The SDD contact lens designed to control SA reduced the total ocular HOA and SA of the eye, resulting in compensating for positive SA of the eyes. Thus, the optical benefits of the lens with SA control would be adopted for improving the quality of vision.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.379-388
• /
• 2002

In this paper, the real-time algorithm is proposed for automatic detection of the face and facial features. In the face region, we extracted eyes, nose, mouth and so forth. There are two methods to extract them; one is the method of using the location information of them, other is the method of using Gaussian second derivatives filters. This system have high speed and accuracy because the facial feature extraction is processed only by detected face region, not by whole image. There are some kinds of good experimental result for the proposed algorithm; high face detection rate of 95%, high speed of lower than 1sec. the reduction of illumination effect, and the compensation of face tilt.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.273-284
• /
• 2002

The purpose of this study is to characterize damage propagation in granite which exists in South Korea. Coarse, medium and fine-grained granite specimens were sampled respectively In order to perform this study, elastic wave velocity test and permeability test were carried out to estimate the physical specificities of specimens before and after damage. Cellulose acetate film duplication method was used to select only cracks from cross section and to make these visible. Using dark-field illumination, approach photographing technique was used to get more distinct photographs of cracks from acetate peel. Computer programs named Photoshop were used to describe cracks. After damage, coarse and medium-grained granite had lower elastic wane velocity, higher permeability, more cracks and more distinct shear fractures than fine-grained granite.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.327-336
• /
• 2004

For visual inspection system in real industrial environment, it is one of most important tasks to design fast and stable pattern matching algorithm. This paper presents an edge-based point correlation algorithm avoiding full search in visual inspection system. Conventional algorithms based on NGC(normalized gray-level correlation) have to overcome some difficulties for applying to automated inspection system in factory environment. First of all, NGC algorithms need high time complexity and thus high performance hardware to satisfy real-time process. In addition, lighting condition in realistic factory environments if not stable and therefore intensity variation from uncontrolled lights gives many roubles for applying directly NGC as pattern matching algorithm in this paper, we propose an algorithm to solve these problems from using thinned and binarized edge data and skipping full point search with edge-map analysis. A point correlation algorithm with the thinned edges is introduced with image pyramid technique to reduce the time complexity. Matching edges instead of using original gray-level pixel data overcomes NGC problems and pyramid of edges also provides fast and stable processing. All proposed methods are preyed from experiments using real images.