• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The lower $2^{nd}$ molar eruption is beginning to mesiolingually, then rotate to distobuccally so it has a tendency to be tilted and impacted mesially. Signs and symptoms of impacted $2^{nd}$ molar are similar to impacted $3^{rd}$ molar's. However, treatment plan for impacted $2^{nd}$ molar is different from that of impacted $3^{rd}$'s. The former is the preservation and uprighting of $2^{nd}$ molar so that it could act to recovery of mastication, symmetrical facial growth, maintaining the symmetry of dental arch, stable occlusion, while the latter is the extraction of tooth. If the uprighting treatment is planned, most proper protocol of treatment and the additional treatment opition should be applied with consideration for it's crown exposure, present of $3^{rd}$ molar which interrupt the uprighting process, extrusion of opposite tooth. Although it could not improve the esthetic result, it could prevent many dental problems. Therefore, uprighting for impacted lower $2^{nd}$ molar is meaningful treatment.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.487-495
• /
• 1995

This study was undertaken to compare each maximum biting force and to investigate its relationship with the facial skeketal form, number and position of tooth contact between anterior openbite and normal occlusion adults, using the T-scan system and the lateral cephalogram. The subjects of this study consisted of a group of 25 individuals with normal occlusion and another group of 14 with anterior openbite. The obtained results of this study were as follows : 1. The maximum biting force of anterior openbite adults was less than that of normal occlusion adults. 2. In anterior openbite adults, there were negative correlations between the maximum, biting force and SN/MP, FMA, PP/MP mesurement of lateral cephalogram. 3. In anterior openbite adults, as the mesial angulation of lower first molar against the occlusal plane increased, the more the biting force decreased. 4. In both groups, the greater the number of tooth contact, the more the biting force increased. 5. In both groups, the center of effort for anteroposterior occlusal contact was located on the first molar region.

• The korean journal of orthodontics
• /
• v.40 no.6
• /
• pp.373-382
• /
• 2010

Objective: The purpose of this study was to assess the dentoalveolar compensation in facial asymmetry individuals using an integration of a CBCT image and a laser scanned dental cast image. Methods: The subjects consisted of 30 adults with asymmetric mandibles and 20 adults with symmetric mandibles. The CBCT and laser scanned dental cast images were integrated with a registration technique. Canine and first molar position and angulation were assessed from reference coordinates. The differences between deviated and non-deviated sides were analyzed with the paired t-test. The differences shown according to menton deviation were also statistically analyzed using Pearson correlation analysis. Results: The experimental group showed deviated and non-deviated side differences (dev.-ndev.) in the position and angle of the canine and first molars. Menton deviation showed positive correlation with the deviation side (dev.-ndev.) for the maxillary and mandibular 1st molar angles, negative correlation with the deviation side for the vertical position of the maxillary 1st molars, transverse position of the mandibular canine, transverse position and vertical position of the mesio-lingual cusp of the mandibular 1st molars. Conclusions: The upper and lower canine and first molars of facial asymmetry individuals were compensated, so the transverse position, vertical position, and angle showed differences between the deviated/non-deviated sides.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.299-310
• /
• 1995

The purpose of this study is to know about the positional change of second molar when orthodontic treatment is performed. To know about it, we andlysed cephalogram pre. and post treatment for 54 adult patients who werefinished orthodontic treatment by banding to the first molar and classify them into 4 groups Class I extraction group 15, Class I nonextraction group 12, Class II group 13, class Class III group 14. The following conclusions were obtained : 1. In the extraction group of Class I , mandibular second molar showed less extrusion and mon distal inclination than first moarl. But maxillary second molar showed more or less extrusive and mesial inclination to much the same degree of first molar. 2. Inthe non-extractio group of Class I, mandibular second molar in intrusive to first molar, it showed smilar distal inclination to first molar. But maxillary second molar is extrusive similarly to first molar. 3. In the group of Class II , mandibular second molar is less extrusive than first molar and maxillary second molar is more extrusive than first molar. 4. In the group of Class III, mandibular second molar showed similar extrusion to first molar and more distal inclination than first molar. But maxillary second molar showed less extrusion than first molar. 5. A comparision of the positional change of second molar among groups : The change of distance from FH plane to funcation point of maxillary second molar is the difference between Class I extraction group and Class II group, Class I extraction group and Class III group. The change of maxillary second molar to palatal plane and occlusal plane is the difference between Class I extraction group and Class III group. And the change of distance from mandibular plan to furcation point of mandibular second molar is difference between Class I extraction group and non-extraction group, Class I non-extraction group and Class II group, Class I non-extraction group and Class III group. But the change of angle of mandibular second molar to mandibular plane and occlusal plane is make no difference in among groups.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.182-195
• /
• 2005

The purpose of this retrospective study was to estimate the pretreatment characteristics of growing patients with Class II malocclusion. who had been treated with maxillary second molar extractions The sample comprised of 51 subjects; 18 subjects were classified into the molar extraction group, and 33 subjects were treated without extraction and classified into the nonextraction group. Pretreatment lateral cephalograms were calculated and analyzed by independent t-test and stepwise discriminant analysis. In measurements for skeletal pattern, no anteroposterior measurements and proportions of various vertical dimensions were significantly different. and only some measurements such as $AB-MP(^{\circ)$, Na-We(mm), AVD (mm) were significantly different between the two treatment groups (p<0.05). In measurements for dentoalveolar pattern. some measurements, which were related to the position and angulation of the upper and lower permanent first molars, and the angulation of the upper third molars, were significantly different between the two treatment groups In particular, the maxillary second molar extraction group exhibited more mesial angulation of maxillary first molar to the occlusal plane.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.308-320
• /
• 2006

Rapid canine retraction, first introduced by Liou, is a distraction osteogenesis applied to the periodontal ligament tissue. Rapid tooth movement was facilitated by establishing minimal bony resistance on the distal surface of the canine by socket preparation and by osteogenesis on the mesial side in response to the periodontal distraction. Since undesired buccal tipping or extrusion of the canine during retraction tends to occur, it is crucial to maintain the firm path of movement and the axis of the canine during retraction. In order to improve the predictability of the canine movement, lingually extended distraction screws with heavy labial guiding wires were designed. Prefabricated plastic canine models for the estimation of socket depth and miniscrew implants for anchorage reinforcement were also devised. Applying these devices to a female patient with Class II anterior protrusion, the whole treatment was effectively finished in 13 months. Loss of vitality or periodontal problems did not occur throughout treatment, and stable occlusion was maintained during 10 months of retention. This case report demonstrates that a predictable rapid canine retraction can be achieved through the use of this modified technique.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.246-251
• /
• 2010

Impactions can occur because of malpositioning of the tooth bud or obstruction in the path of eruption. However, the exact mechanism is still unknown. The impaction of mandibular first molar is rare with prevalence rates of 0.01~0.25%, but it is important to deimpact the tooth as soon as possible to avoid complications such as dental caries, root resorption, and periodontal problems on the adjacent teeth. Several biomechanical strategies have been proposed for uprighting mesially tipped mandibular first molars. However, most of these have had problems with movement of the anchorage unit because of the reciprocal force. The recent development of skeletal anchorage system(SAS) allows direct application of precise force systems to the target tooth or segment, producing efficient tooth movement in a short time. In this case, an impacted mandibular left first molar with dilacerated roots was treated with a miniplate, which provided skeletal anchorage to upright the tooth. The miniplate was installed in the mandibular ramus, and 10 months after the application of orthodontic force, the impacted tooth was exposed in the oral cavity and uprighted. At this point, the mandibular left first molar was included in the orthodontic appliance with fixed mechanotherapy, the tooth could achieve a normal occlusion. Therefore, the use of SAS simplified the orthodontic procedures and reduced the orthodontic treatment period, and had few side effects.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.29-40
• /
• 2020

Purpose: The purpose of this study was to compare the accuracy of impression taking method using the encoded healing abutment, scan body and pick-up impression coping with different implant angulations. Materials and Methods: Master model was fabricated by 3D printer and three implants were placed into the model with 0°, 10° and 20° mesial angulation. The abutments were secured to each implants and master model was scanned to make a reference model. Group P model was fabricated using pick-up impression copings and model was scanned after securing the abutments. Encoded healing abutment (Group E) and scan body (Group S) were secured on the master model and digital impression was taken using intraoral scanner 15 times each. Each STL files of test groups were superimposed with reference model using best fit alignment and root mean square (RMS) value was analyzed. Results: The RMS values were lowest in Group P, followed by Group S and Group E. Group P showed significant difference with Group S and E (P < 0.05) while there was no significant difference between Group S and E. Correlation between implant angulation and RMS value was significant in Group E (P < 0.05). Conclusion: The pick-up impression coping method showed higher accuracy and there was no significant difference in accuracy between the healing abutment and the scan body. The clinical use of the encoded healing abutment is possible, but it should be used with caution in the case of angulated implant.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.325-333
• /
• 2001

Optimal orthodontic treatment could be possible when a orthodontist can predict and control tooth movement by applying a planned force system to the dentition. The moment to force(M/F) ratio at the bracket, has been shown to be a primary determinate of the pattern of tooth movement. As various n/F ratios are applied to the bracket on the tooth crown, strain distribution in periodontium can be changed, and the center of rotation in tooth movement can be determined. It is, therefore, so important in clinicalorthodontics to know the strain distribution in a force system of a M/F ratio. The purpose of this study was to analyze the strain distribution in orthodontic force system by strain gauge attached to tooth root, and to evaluate the usage of the method. For this study, an experimental upper anterior arch model was constructed, where upper central incisors, on the root surface of which, 8 strain gauges were attached, were implanted In the photoelastic resin, as in the case of 4mm midline diastema. Three types of closing of upper midline diastema closure were compared : 1. with elastomeric chain(100g force) in no arch wire, 2. elastomeric chain in .016“ round steel wire, 3. elastomeric chain in .016”x.022“ rectangular steel wire. The results were as follows. 1. Strain distributions on labial, lingual, mesial and distal root surface of tooth were able to be evaluated with the strain gauge method, and the patterns of tooth rotation were understood by presuming the location of moment arm. 2. Extrusion and tipping movement of tooth was seen in closing in no arch wire, and intrusion and bodily movement was seen with steel arch wire inserted.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2011

The ectopic eruption is defined as abnormal eruption which gives to displacement of the teeth and abnormal root resorption of adjacent teeth. The prevalence of ectopic eruption is reported to vary 2~6%, most of them are in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, inclined eruption path of the first molar, retruded position of the maxilla and hereditary factor. Irreversible ectopic eruption where the second primary molar is lost often causes mesial tipping and rotation of the permanent molar, unfavorable occlusion and space deficiency for the second premolar. Ectopically erupted teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support. The method of the treatment are classified as follows : appliances that is positioned at the contact point for unlocking and the distal movement, fixed appliance that is connected to more than one tooth, and occlusion guiding method after disking or extraction of the second deciduous molar. A case report of a patient with bilaterally ectopic eruption of maxilla and mandible first permanent molar was present. Also, the patient who had experienced the chronic myelogenous leukemia, show various dental developmental complications. The ectopic eruption was treated with a Halterman appliance that was a effective way of correcting of ectopic eruption of the permanent first molar.