• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.373-379
• /
• 2019

AeroMACS spectrum is a national resource internationally allocated by ITU at WRC-07. AeroMACS is an airport broadband mobile communication infrastructure based on WiMAX-based IEEE 802.16e that enables real-time video, graphics, voice, and high-speed data transmission. With the approval of ICAO's development technology standards in 2008, 50 airports in 11 countries have already completed the testing of D-TAXI or A-SMGCS technology using the AeroMACS infrastructure in 2019, starting in the United States in 2009. With many advantages in safety and convenience in terrestrial telecommunications operations, the system is becoming an area of performance improvement for airport operations in accordance with ICAO's ASBU plan. This paper examines the current status of domestic development of AeroMACS and lists service areas applicable to airlines and operators. It also seeks to promote safe and efficient next-generation airport mobile communication system services by presenting feasible partners management in the mobile area and use of aircraft communication systems for active technology development.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.409-416
• /
• 2016

The contact force characteristic between the pantograph and the catenary wire represents the current collection quality of trains; it should be precisely controlled under international standard. Recently, a noise reduction cover has been installed around the pantograph of high speed trains. However, little study on the contact force by the pantograph cover has been conducted. In this study, the impact on the current collection performance of the pantograph cover was analyzed by dynamic contact force measurement using a next generation high speed train (HEMU-430X). As a result, it was confirmed that the attachment of a pantograph cover could lower the mean contact force by approximately 50N at 300km/h. In addition, the pure difference of the average contact force by the presence of pantograph cover, except for the static pressure, was measured and found to be up to 110N at 300km/h. It was also found that the standard deviation of the contact force of 3~5N could be changed by use of a pantograph cover.

• Convergence Security Journal
• /
• v.21 no.3
• /
• pp.67-73
• /
• 2021

According to a survey by the Korea Tourism Organization in 2018 and 2019, traveling to places recorded in TV programs or influential videos has become an important travel trend and several studies show that watching a travel program improves the intention to visit the places featured on the program. This study designed a travel program-linked data service that provides additional information on the places and events to the viewers of the travel program. Specifically, the additional information of the travel program was defined in a formal manner by dividing it into places and events, and a method of exposure of the additional information conformed to the contents of the program was designed. We also devised an international standard DVB-based data transmission method that provides the additional information to data services appropriately in time for program broadcasting. This study is significant in that it tested new applications of data services for travel programs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.165-170
• /
• 1994

High quality rapeseed cultivars including Nojeokchae, Yeongsanyuchae Halla-yuchae and Tamrayuchae have been released and recommended as a zero erucic acid variety to Cheju farmers for 13 years, where is a major rapeseed production area in korea. However, rapeseeds produced in Cheju island in 1992 and 1993 contained 47.7% and 37.0% of erucic acid respectively resulting in poor quality oil being not adequate for edible oil. It was considered that the zero erucic acid varieties did not have an opportunity to be cultivated in Cheju island by farmers living in the Island. Thus, the new rapeseed varieties without erucic acid should be bred and recommended to the farmers of southern area of Korea as a multiple cropping crop just after rice harvest, and for large scale mechanized and labour-serving rapeseed culture. The change of rapeseed breeding goal would be desirable for fatty acid composition improvement of rapeseed to develop varieties adaptable to southern part of Korea, and to produce rapeseed oil directly used as an edible oil safely.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.227-234
• /
• 2019

An analytical method was developed for the determination of oxytetracycline in agricultural products using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method by liquid chromatography-tandem mass spectrometry (LC-MS/MS). After the samples were extracted with methanol, the extracts were adjusted to pH 4 by formic acid and sodium chloride was added to remove water. Dispersive solid phase extraction (d-SPE) cleanup was carried out using $MgSO_4$ (anhydrous magnesium sulfate), PSA (primary secondary amine), $C_{18}$ (octadecyl) and GCB (graphitized carbon black). The analytes were quantified and confirmed with LC-MS/MS using ESI (electrospray ionization) in positive ion MRM (multiple reaction monitoring) mode. The matrix-matched calibration curves were constructed using six levels ($0.001{\sim}0.25{\mu}g/mL$) and coefficient of determination ($r^2$) was above 0.99. Recovery results at three concentrations (LOQ, $10{\times}LOQ$, and $50{\times}LOQ$, n=5) were from 80.0 to 108.2% with relative standard deviations (RSDs) less than of 11.4%. For inter-laboratory validation, the average recovery was in the range of 83.5~103.2% and the coefficient of variation (CV) was below 14.1%. All results satisfied the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and the Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for oxytetracycline determination in agricultural commodities. This study could be useful for safety management of oxytetracycline residues in agricultural products.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.789-795
• /
• 2023

Digital-Twin are recognized as an important core technology for the realization of Smart Factories by simulating and optimizing the monitoring and predictive maintenance of manufacturing equipment and the operation of production lines in a digital space. To implement this system, we adopt the IEC62541-based OPC-UA (Open Platform Communications Unified-Architecture) Protocol, which has strengths in interoperability and connectivity between heterogeneous platforms. Therefore, In this paper, We designed and implemented an IIoT(Industry Internet of Things) system that connects heterogeneous platforms, and developed an OPC-UA simulator based on IEC 62541. We will present whether the data will be applied to the Digital-Twin Platform and whether it will work, and proceed with performance tests and evaluations. We evaluate the operation performance and OPC-UA performance of the Digital-Twin platform lightened by the proposed device, and present the optimal IEC62514-based simulator system. We proceeded with the performance evaluation of sending and receiving data with OPC-UA wrapping with the proposed simulator, and found that a lightweight Digital-Twin platform can be operated. This research can apply the OPC-UA protocol for implementing smart factory and meta-factory in the manufacturing shop floor with limited resources, avoiding the waste of time and space on the shop floor through the OPC-UA simulator. We expect that this will contribute to a significant improvement in efficiency by minimizing.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.495-498
• /
• 2018

In this paper, we propose an DAP system for dose evaluation of medical and industrial X-ray generator. Based on the DAP measurement technique using the Ion-Chamber, the proposed system can clearly measure the exposure radiation dose generated by the diagnostic X-ray apparatus. The hardware part of the DAP measures the amount of charge in the air that is captured by an X-ray. The high-speed processing algorithm part for cumulative radiation dose measurement through microcurrent measures the amount of charge captured by X-ray at a low implementation cost (power) with no input loss. The wired/wireless transmission/reception protocol part synchronized with the operation of the X-ray generator improves communication speed. The PC-based control program part for interlocking and aging measures the amount of X-ray generated in real time and enables measurement graphs and numerical value monitoring through PC GUI. As a result of evaluating the performance of the proposed system in an accredited testing laboratory, the measured values using DAP increased linearly in each energy band (30, 60, 100, 150 kV). In addition, since the standard deviation of the measured value at the point of 4 division was ${\pm}1.25%$, it was confirmed that the DAP showed uniform measurements regardless of location. It was confirmed that the normal operation was not less than ${\pm}4.2%$ of the international standard.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.56-64
• /
• 2008

Although the EGSE (Electrical Ground Support Equipment) and MCS (Mission Control System) have many similar or even identical functions, the EGSE used for assembly, integration and validation phase and the MCS for the mission operations phase are normally developed separately and used by different groups of engineers. However, the common ground system for EGSE and MCS has developed and many space missions such as PROBA (PRoject for On-Board Autonomy), ROSETTA, MARS EXPRESS, CRYOSAT (Cryosphere Satellite), GOCE (Gravity field and steady state Ocean Circulation Explorer), and GALILEO have used or will use it to minimize risk, reduce cost and improve overall product quality. It is based on ECSS (European Cooperation for Space Standards) E70 which is the international standard for ground systems and operations published by ECSS E70 Working Group. The ECSS E70 contains the basic rules, principles and requirements applied to the engineering of the ground systems and the execution of mission operations. This paper introduces standardization policy, organization and standard documentation in ECSS. The overview of ECSS E70 such as status, purpose and contents is also described in this paper.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.132-139
• /
• 2017

Endocrine disrupting chemicals (EDCs) interfere with endocrine system in organisms, and have different mode of actions compared to conventional chemicals. Therefore, EDCs specific ecotoxicity tests and assessments have been globally developed by some organizations such as OECD, ASTM, and USEPA. In Korea, researches on EDCs and monitoring of EDCs in domestic environments were also continued. However, Korean ecotoxicity test guidelines for EDCs are not suggested till date. The purpose of this study is to review and analyze international ecotoxicity test guidelines for EDCs and the compare ecotoxicity methods and toxicity endpoints among standard test guidelines. We found that there are very limited EDCs specific soil ecotoxicity test guidelines (only in ASTM) compared to aquatic ecotoxicity test guidelines. Currently, fish, amphibian, waterflea, copepoda, earthworm, white worm, springtail, nematode, mite, and midge are suggested as standard ecotoxicity test species for EDCs. Reproduction, hormones, growth, vitellogenin, sex retio and development were proposed as endpoints for EDCs ecotoxicity. This study provided the comparison of EDCs specific ecotoxicity methods and endpoints between standard test guidelines, and suggested the further research to develop the method for assesseing ecotoxicity of EDCs.