• Applied Microscopy
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2009

GM-CSF is a multipotent growth factor, which also plays an important role during the process of wound healing. rrhGM-CSF was specifically produced from rice cell culture in our laboratory (Hanson Biotech Co., Ltd, Daejeon). The rrhGMCSF contains more oligosaccharide side chains than any other types of GM-CSF. This work was taken to evaluate the influence on wound healing of rrhGM-CSF in male golden hamsters. Full thickness skin defects of 9 mm in diameter were made in the back of hamsters, and 100 ${\mu}L$ ointment containing rrhGM-CSF 50 ${\mu}g/mL$ was applied. Control groups were given ointment without rrhGM-CSF. The wound sizes were relatively reduced and skin was well regenerated in the experimental group compared with the control group. Structurally, reepithelialization and architecture of the skin following injury were well accomplished in the experimental group. And also, positive reaction of PCNA of the skin following injury was more prominent in rrhGM-CSF containing ointment treatment group. Since this type of GM-CSF has highly glycosylated side chains, the effectiveness might be retain longer and stable, regarding acceleration of wound healing in the animal model. The present study has important implications for further development of the therapeutic manipulation of wound healing using rrhGM-CSF.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.137-146
• /
• 2012

This study investigated whether ferulic acid modulates the heme oxygenase (HO)-1 and HO-2 expression in middle cerebral artery occlusion (MCAO)-induced brain injury. Rats (Sprague-Dawley, male) were treated with vehicle or ferulic acid (100 mg/kg, i.v.) before MCAO, and cerebral cortex tissues were collected 24 h after MCAO. This study clearly confirmed the protective effects of ferulic acid during MCAO-induced damage using hematoxylin and eosin staining. MCAO induces nuclear chromatin condensations and necrotic changes with scalloped shrunken form. However, ferulic acid prevented MCAO-induced histopathological changes. HO-1 and HO-2 expression levels were measured using reverse-transcription PCR and Western blot analyses. HO-1 levels were decreased in vehicle-treated animals after MCAO, whereas this decrease in HO-1 levels was attenuated by ferulic acid treatment. However, the level of HO-2 was consistently maintained in the cerebral cortex of vehicle- and ferulic acid-treated animals after MCAO. These results demonstrated that ferulic acid regulates HO-1 expression in ischemic brain injury, while ferulic acid do not modulate HO-2 expression in MACO. In conclusion, these findings suggest that ferulic acid exerts a neuroprotective effect by preventing the MCAO-induced decrease of HO-1 expression.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.91-99
• /
• 1999

Propose : This study was performed to find out the prognostic factors affecting local control, survival and disease free survival rate in nasopharyngeal carcinomas treated with chemotherapy and radiation therapy. Materials and Methods : We analysed 47 patients of nasopharyngeal carcinomas, histologically confirmed and treated at Chonnam University Hospital between July 1986 and June 1996, retrospectively. Range of patients' age were from 16 to 80 years (median; 52 years). Thirty three (70$\%$) patients was male. Histological types were composed of 3 (6$\%$) keratinizing, 30 (64$\%$) nonkeratinizing squamous cell carcinoma and 13 (28$\%$) undifferentiated carcinoma. Histoiogicai type was not known in 1 patient (2$\%$). We restaged according to the staging system of 1997 American Joint Committee on Cancer Forty seven patients were recorded as follows: 71: 11 (23$\%$), T2a; 6 (13$\%$), T2b; 9 (19$\%$), 73; 7 (15$\%$), 74: 14 (30$\%$), and NO; 7 (15$\%$), Nl: 14 (30$\%$), N2; 21 (45%), N3: 5 (10%). Clinical staging was grouped as follows: Stage 1; 2 (4$\%$), IIA: 2 (4$\%$), IIB; 10 (21$\%$), III; 14 (30$\%$), IVA; 14 (30$\%$) and IVB; 5 (11$\%$). Radiation therapy was done using 6 MV and 10 MV X- ray of linear accelerator. Electron beam was used for the Iymph nodes of posterior neck after 4500 cGy. The range of total radiation dose delivered to the primary tumor was from 6120 to 7920 cGy (median; 7020 cGy). Neoadjuvant chemotherapy was performed with cisplatin +5-fluorouracil (25 patients) or cisplatin+pepleomycin (17 patients) with one to three cycles. Five patients did not received chemotherapy. Local control rate, survival and disease free suwival rate were calculated by Kaplan-Meier method. Generalized Wilcoxon test was used to evaluate the difference of survival rates between groups. multivariate analysis using Cox proportional hazard model was done for finding prognostic factors. Results: Local control rate was 81$\%$ in 5 year. Five year survival rate was 60$\%$ (median survival; 100 months). We included age, sex, cranial nerve deflicit, histologic type, stage group, chemotherapy, elapsed days between chemotherapy and radiotherapy, total radiation dose, period of radiotherapy as potential prognostic factors in multivariate analysis. As a result, cranial none deficit (P=0.004) had statistical significance in local control rate. Stage group and total radiation dose were significant prognostic factors in survival (P=0.000, P=0.012), and in disease free survival rates (P=0.003, P=0.008), respectively. Common complications were xerostomia, tooth and ear problems. Hypothyroidism was developed in 2 patients. Conclusion : In our study, cranial none deficit was a significant prognostic factor in local control rate, and stage group and total radiation dose were significant factors in both survival and disease free survival of nasopharyngeal carcinoma. We have concluded that chemotherapy and radiotherapy used in our patients were effective without any serious complication.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.297-310
• /
• 2007

치조골 흡수는 파골세포와 matrix metalloproteinases (MMPs)에 의한 골의 무기질과 유기질의 파괴로 일어나는 과정이다. 세균성 산물, 주로 내독소는 치은조직 내에서 염증세포의 유주, 사이토카인 생산, 조직파괴 효소 분비 및 파골세포 활성 등의 국소 면역반응을 유도한다. A. actinomycetemcomitans는 급진성 치주염의 원인 균주중 하나로 그 내독소는 치조골의 흡수와 관련된다. MMP-13은 세균성 산물이나 염증성 사이토카인의 자극에 의해 분비되며, 최근의 연구 결과들은 MMP-13이 치주질환의 진행과 골 흡수 과정에서 일정한 역할을 담당하는 것으로 보고하고 있으나, A. actinomycetemcomitans 내독소와 MMP-13과의 관련성에 대한 연구는 미미하다. 이에 이번 연구에서는 A. actinomycetemcomitans 내독소에 의한 MMP-13의 발현과 파골세포 형성을 세포배양을 통하여 관찰하였고, 백서 구개부 치은에 A. actinomycetemcomitans 내독소를 주입하여 흡수가 진행되고 있는 치조골에서 파골세포의 분화와 MMP-13의 발현을 TRAP 염색, 면역조직화학적 방법 등을 통해 관찰하여 다음과 같은 결과를 얻었다. MMP-13 mPNA의 발현은 A. actinomycetemcomitans 내독소 (1ug/ml)로 24시간 자극한 마우스 치주인대 섬유모세포에서 생리식염수로 자극한 세포에 비하여 약 2.6배 증가하였으며 마우스 대식세포에서는 TRAP 양성 세포가 대조군보다 더 많이 나타났다. A. actinomycetemcomitans 내독소를 주입한 백서 치주조직에서는 대조군보다 더 심한 골소실을 보였다. TRAP-양성 다핵 파골세포 유사세포는 치주염군과 대조군 모두 치조골에서 관찰되었다. TRAP-양성 다핵 파골세포 유사세포는 치주염군에서 대조군보다 유의하게 많은 숫자가 관찰되었으며, 치주염군에서 대조군보다 유의하게 많은 숫자가 관찰되었다. MMP-13 면역양성 반응은 치주염군에서 거친 골연을 갖는 치조골상에 배열된 조골세포와 그 인접한 치주인대에서 관찰되었으며 대조군에서는 MMP-13 면역 양성 반응이 치조골 표면에서만 일부 관찰되었다. 이상의 결과는 A. actinomycetemcomitans 내독속가 MMP-13의 발현을 증가시키며 파골세포의 활성을 통하여 치조골의 흡수를 유도함을 시사한다. 또한 A. actinomycetemcomitans 내독소 투여에 의한 실험적 모델은 백서에서 중등도의 골 소실을 동반한 만성 치주염 모델로 향후 치주질환 치료제의 효과를 평가하는데 유용하게 사용될 수 있으리라 기대된다.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.189-197
• /
• 2017

In the design of an automotive structural component, one of the more important tasks for a design engineer is to determine the life of the component and to ensure that the component will not fail prematurely. In order to accomplish this, a design engineer will first use simple section analysis to come up with a section shape in the concept design stage and use more advanced analysis for stress level. At this stage, the analysis should focus on understanding overall behavior in terms of load paths and gross stress levels. A model that is adequate for a stiffness analysis of the structure will usually provide an adequate level of stress information in the design process. To perform a detailed stress analysis, the structure models must have the detailed local areas such as stress concentrations or force(or displacement) distributions. This paper is to present the design considerations for the stress analysis of automotive structure.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2008

We have developed an inversion algorithm for loop-loop electromagnetic (EM) data, based on the localised non-linear or extended Born approximation to the solution of the 2.5D integral equation describing an EM scattering problem. Source and receiver configuration may be horizontal co-planar (HCP) or vertical co-planar (VCP). Both multi-frequency and multi-separation data can be incorporated. Our inversion code runs on a PC platform without heavy computational load. For the sake of stable and high-resolution performance of the inversion, we implemented an algorithm determining an optimum spatially varying Lagrangian multiplier as a function of sensitivity distribution, through parameter resolution matrix and Backus-Gilbert spread function analysis. Considering that the different source-receiver orientation characteristics cause inconsistent sensitivities to the resistivity structure in simultaneous inversion of HCP and VCP data, which affects the stability and resolution of the inversion result, we adapted a weighting scheme based on the variances of misfits between the measured and calculated datasets. The accuracy of the modelling code that we have developed has been proven over the frequency, conductivity, and geometric ranges typically used in a loop-loop EM system through comparison with 2.5D finite-element modelling results. We first applied the inversion to synthetic data, from a model with resistive as well as conductive inhomogeneities embedded in a homogeneous half-space, to validate its performance. Applying the inversion to field data and comparing the result with that of dc resistivity data, we conclude that the newly developed algorithm provides a reasonable image of the subsurface.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Pediatric Infection and Vaccine
• /
• v.18 no.2
• /
• pp.109-116
• /
• 2011

Purpose : Pneumococcus is one of the most important causes of invasive infection through the childhood period. In January 2008, the Clinical and Laboratory Standards Institute (CLSI) published revised penicillin breakpoints for Streptococcus pneumoniae and penicillin susceptibility rates of S. pneumoniae increased in Korea. This study was performed to determine the probability of oral amoxicillin for the empirical treatment achieving bactericidal exposure against pneumococcus using pharmacodynamics model. Methods : Twenty-three isolates of pneumococci were subjected to determine minimum inhibitory concentration (MIC) for ${\beta}$-lactams and macrolide. For the ${\beta}$-lactams, exposure of fT >MIC (time that free drug concentrations remain above the MIC) for 50% of the administration interval have determined the probability of target attainment (PTA), and regimens that had a PTA >90% were considered optimal. An analysis was performed by applying MIC of 23 isolates to a 5000-patient Monte Carlo simulation model. Results : Among 23 isolates from healthy children, 7 (30.4%) isolates were MIC ${\leq}$1.0 ${\mu}g$/mL and 19 (82.6%) were MIC ${\leq}$2 ${\mu}g$/mL for amoxicillin. Amoxicillin 40 mg/kg/day achieved PTA >90% at MIC ${\leq}$1.0 ${\mu}g$/mL but PTA decreased to 52% at MIC 2 ${\mu}g$/mL, whereas amoxicillin 90 mg/kg/day can predict 97% of PTA at MIC 2 ${\mu}g$/mL. Overall, oral amoxicillin 90 mg/ kg/day for the empirical treatment against pneumococcus can expect more successful response in Korean children. Conclusion : Considering the resistantce pattern of pneumococci in Korean children, we estimate that oral amoxicillin 90 mg/kg/day will provide a pharmacodynamic advantage for the empirical treatment against pneumococcus. And low dose amoxicillin or macrolide are expected to have higher chance of treatment failure than high dose oral amoxicillin.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.137-148
• /
• 1997

Diagnostic problem solving is a major application area of knowledge-based systems research. However, most of the current approaches, both heuristic and model-based, are designed to identify single faults, and do not generalize easily to multiple fault diagnosis without exhibiting exponential behavior in the amount of computation required. In this paper, we employ a decomposition approach based on system configuration to generate an efficient algorithm for multiple fault diagnosis. The basic idea of the algorithm is to reduce the inherent combinatorial explosion that occurs in generating multiple faults by partitioning the circuit into groups that correspond to output measurement points. Rules are multiple faults by partitioning the circuit into groups that correspond to output measurement points. rules are developed for combining candidates from individual groups, and forming consistent sets of minimal candidates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.1972-1978
• /
• 2010

AAM(Active Appearance Model) is one of the most effective ways to detect deformable 2D objects and is a kind of mathematical optimization methods. The cost function is a convex function because it is a least-square function, but the search space is not convex space so it is not guaranteed that a local minimum is the optimal solution. That is, if the initial value does not depart from around the global minimum, it converges to a local minimum, so it is difficult to detect face contour correctly. In this study, an AAM-based face tracking algorithm is proposed, which is robust to various lighting conditions and backgrounds. Eye detection is performed using SIFT and Genetic algorithm, the information of eye are used for AAM's initial matching information. Through experiments, it is verified that the proposed AAM-based face tracking method is more robust with respect to pose and background of face than the conventional basic AAM-based face tracking method.