• Journal of Integrative Natural Science
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2021

On November 17, 2019, an infectious disease with symptoms of pneumonia, called the Wuhan virus at the time, occurred in Wuhan, China. Since then, the name has been changed to COVID-19, and the virus has spread all over the world, and the WHO has declared the highest warning level for infectious diseases, "Pandemic". The coronavirus has also caused great confusion in South Korea. This resulted in large infected people.The first confirmed cases occurred on January 20, 2020, and the number of infected patients is steadily increasing after experiencing several waves, and many corona confirmed cases are also occurring in 2021 after the year. As the whole world enters a pandemic, walls are created between people and people, companies and businesses, and countries and countries, and all growth stops or declines, including human relationships, domestic companies and industries, and foreign industries. As a result, society in general is experiencing a lot of stagnation. Among them, small and medium-sized enterprises (SMEs), which are the basis of all growth in Korea, and youth who are trying to contribute to the national development by entering society, are struggling to find jobs. Even before the coronavirus outbreak, the difficulty of job hunting and the prospect of small and medium-sized businesses were not very good. In this situation, as the country's overall economic situation is poor, the vitality of SMEs has decreased a lot, the prospects are not good, so jobs are reduced, and there are many difficulties due to reluctance to hire new employees. In this study, with 2019 before the corona era and 2020 after the corona era, we compare SMEs before and after the corona era and overall job search and job search activities through average difference analysis, and whether they are affecting through correlation analysis. Through this, it suggests a direction to increase job search through corporate and government policies after raising the prospects of SMEs first.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1339-1348
• /
• 2021

In accordance with the River Law, the basic river maintenance plan is established every 5-10 years with a considerable national budget for domestic rivers, and various river surveys such as the river section required for HEC-RAS simulation for flood level calculation are being conducted. However, river survey data are provided only in the form of a pdf report to the River Management Geographic Information System (RIMGIS), and the original data are distributedly owned by designers who performed the river maintenance plan in CAD format. It is a situation that the usability for other purposes is considerably lowered. In addition, when using surveyed CAD-type cross-sectional data for HEC-RAS, tools such as 'Dream' are used, but the reality is that time and cost are almost as close as manual work. In this study, RAUT (River Information Auto Upload Tool), a tool that can solve these problems, was developed. First, the RAUT tool attempted to automate the complicated steps of manually inputting CAD survey data and simulating the input data of the HEC-RAS one-dimensional model used in establishing the basic river plan in practice. Second, it is possible to directly read CAD survey data, which is river spatial information, and automatically upload it to the river spatial information DB based on the standard data model (ArcRiver), enabling the management of river survey data in the river maintenance plan at the national level. In other words, if RIMGIS uses a tool such as RAUT, it will be able to systematically manage national river survey data such as river section. The developed RAUT reads the river spatial information CAD data of the river maintenance master plan targeting the Jeju-do agar basin, builds it into a mySQL-based spatial DB, and automatically generates topographic data for HEC-RAS one-dimensional simulation from the built DB. A pilot process was implemented.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.223-232
• /
• 2021

In general, stormwater flows to the road surface, especially in urban areas, and it is discharged through the drainage grate inlets on roads. The appropriate evaluation of the road drainage capacity is essential not only in the design of roads and inlets but also in the design of sewer systems. However, the method of road surface flow analysis that reflects the topographical and hydraulic conditions might not be fully developed. Therefore, the enhanced method of road surface flow analysis should be presented by investigating the existing analysis method such as the flow analysis module (uniform; varied) and the flow travel time (critical; fixed). In this study, the algorithm based on varied and uniform flow analysis was developed to analyze the flow pattern of road surface. The numerical analysis applied the uniform and varied flow analysis module and travel time as parameters were conducted to estimate the characteristics of rainfall-runoff in various road conditions using the developed algorithm. The width of the road (two-lane (6 m)) and the slope of the road (longitudinal slope of road 1 - 10%, transverse slope of road 2%, and transverse slope of gutter 2 - 10%) was considered. In addition, the flow of the road surface is collected from the gutter along the road slope and drained through the gutter in the downstream part, and the width of the gutter was selected to be 0.5 m. The simulation results were revealed that the runoff characteristics were affected by the road slope conditions, and it was found that the varied flow analysis module adequately reflected the gutter flow which is changed along the downstream caused by collecting of road surface flow at the gutter. The varied flow analysis module simulated 11.80% longer flow travel time on average (max. 23.66%) and 4.73% larger total road surface discharge on average (max. 9.50%) than the uniform flow analysis module. In order to accurately estimate the amount of runoff from the road, it was appropriate to perform flow analysis by applying the critical duration and the varied flow analysis module. The developed algorithm was expected to be able to be used in the design of road drainage because it was accurately simulated the runoff characteristics on the road surface.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.235-244
• /
• 2017

'Manbaek' is a bacterial blight resistant mid-late maturing rice cultivar with high grain quality. 'Manbeak' was derived from anther culture using the backcross combination, $Hopum^*2/SR30075$. 'Hopum' is a mid-late maturing rice cultivar with high grain quality and 'SR30075' is a pyramid line carrying three bacterial blight resistance genes. 'Manbaek' was selected through the pedigree method, yield trials, and local adaptability tests. 'Manbeak' carrying two bacterial blight resistance gene Xa3 and xa5 showed high-level and broad-spectrum resistance against bacterial blight. 'Manbaek' was resistant to K3a, mostly virulent race in Korea, and exhibited resistance reaction against 16 Korean bacterial blight isolates. 'Manbaek' was a mid-late maturing rice. The heading date of 'Manbaek' was August 19th, which was 5 days later than that of 'Nampyeong'. Manbaek' was a lodging-tolerant rice with short culm and dark green leaf. Due to the low viviparous germination, 'Manbaek' could be a useful material to prevent pre-harvest sprouting. 'Mabeak' was resistant to bacterial blight and rice stripe virus, but susceptible to other virus diseases and insect pests. The yield of 'Manbaek' was similar to 'Nampyeong'. 'Manbaek' showed excellent grain appearance and good tastes of cooked rice, so that it could contribute to improving the quality of bacterial blight resistant cultivars. 'Manbaek', bacterial blight resistant cultivar with high grain quality, is suitable for the cultivation at bacterial blight prone area and has been utilized in the breeding programs for enhancing the resistance against bacterial blight (Registration No. 6069).

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.121-131
• /
• 2018

Stature is one of the unique biological properties of a person, which can be used for identification of the individual. In this regard, statures are estimated for the unknown victims from crimes and disasters. However, the accuracy of estimates may be compromised by inappropriate methodologies and/or practices of stature estimation. Discussed in this study are the methodological issues related to the current practices of forensic anthropological stature estimation in Korea, followed by suggestions to enhance the accuracy of the stature estimates. Summaries of forensic anthropological examinations for 560 skeletal remains, which were conducted at the National Forensic Service (NFS), were reviewed. Mr. Yoo Byung-eun's case is utilized as an example of the NFS's practices. To estimate Mr. Yoo's stature, Trotter's (1970) femur equation was applied even though the fibula equation of a lower standard error was available. In his case report, the standard error associated with the equation (${\pm}3.8cm$) was interpreted as an 'error range', which gave a hasty impression that the prediction interval is that narrow. Also, stature shrinkage by aging was not considered, so the estimated stature in Mr. Yoo's case report should be regarded as his maximum living stature, rather than his stature-at-death. Lastly, applying Trotter's (1970) White female equations to Korean female remains is likely to underestimate their statures. The anatomical method will enhance the accuracy of stature estimates. However, in cases that the anatomical method is not feasible, the mathematical method based on Korean samples should be considered. Since 1980's, effort has been made to generate stature estimation equations using Korean samples. Applying the equations based on Korean samples to Korean skeletal remains will enhance the accuracy of the stature estimates, which will eventually increase the likelihood of successful identification of the unknowns.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.390-396
• /
• 2010

A weedy rice, Ganghwaaengmi 11, shows high level of leaf blast resistance. The chromosomal number and locations of genes conferring the leaf blast resistance were detected by QTL (quantitative trait loci) analysis using SSR markers in the 120 RILs (recombinant inbred lines) derived from the cross between Nagdongbyeo and Ganghwaaengmi 11. Ganghwaaengmi 11 expressed compatibility with 20 of the 45 inoculated blast isolates, in contrast to Nagdongbyeo with 44 compatible isolates. To identify QTLs affecting partial resistance, RILs were assessed in upland blast nursery in three regions and inoculated with selected nine blast isolates. QTLs for resistance to blast isolates were identified on chromosomes 7, 11 and 12. Three QTLs associated with blast resistance in nursery test at three regions were also detected on chromosomes 7, 11 and 12. The QTL commonly detected on chromosome 12 was only increased blast resistance by Ganghwaaengmi 11 allele. This QTL accounted for 60.3~78.6% of the phenotypic variation in the blast nursery test. OSR32 and RM101 markers tightly linked to QTL for blast resistance on chromosome 12 might be useful for marker-assisted selection (MAS) and gene pyramiding to improve the blast resistance of japonica rice.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.397-406
• /
• 2010

Field screening method has been commonly used for purity test of $F_1$ hybrid seeds in melon and oriental melon. However, as this method takes a lot of time and cost, molecular marker-based purity test is necessary. To develop molecular markers for purity test, thirty pairs of SNP (single nucleotide polymorphism) primers were obtained from melon EST sequences, and 10 polymorphic markers showing HRM (high resolution melting) polymorphisms between parents of two melon cultivars and one oriental melon cultivar were selected. Blind tests were performed to validate usefulness of the selected markers for purity test. Blind test results showed that HRM genotypes were matched with the expected identity of individual sample, $F_1$ hybrid, male or female parents. Three HRM-based SNP markers were converted to CAPS markers for general use which is favor to breeders. We expect that SNP markers developed in this study will be useful for purity test of $F_1$ hybrid seeds in melon and oriental melon.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.525-533
• /
• 2010

In this study, random amplified polymorphic DNA (RAPD) and simple sequence repeat (SSR) analyses were utilized for evaluation of genetic diversity of 34 Korean bred and introduced apple cultivars. Thirty-seven RAPD primers detected a total of 193 polymorphic bands (36.2%) with an average of 5.6. Twenty-six SSR markers generated a total of 112 alleles with an average 4.3 alleles per locus. Genetic diversity of 34 cultivars estimated by polymorphic information content (PIC) value ranged from 0.536 (CH03d12) to 0.952 (CH04c06) with an average of 0.843. By UPGMA (unweighted pair-group method arithmetic average) cluster analysis with 305 polymorphic bands, the apple cultivars were classified four groups by similarity index of 0.640. The 'Seokwang' was included in group I. Group II consisted of 12 cultivars which have 'Golden Delicious' in their pedigree, with the exception of 'Spur Earliblaze' and 'Jonathan'. Group III included 13 cultivars which have usually 'Fuji' in their ancestry and bud sport of 'Fuji' cultivars. Group IV consisted of 8 cultivars with 'Hongro', 'Gamhong', and 'Saenara'. Similarity values among the tested apple cultivars ranged from 0.529 to 0.987, and the average similarity value was 0.647. The similarity index was the highest (0.987) between 'Hwarang' and 'Danhong', and the lowest (0.529) between 'Seokwang' and 'Hwarang'. The genetic relationships among the 34 studied apple cultivars were basically consistent with the known pedigree.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.1
• /
• pp.9-16
• /
• 2019

This study was carried out to investigate the effects of seeding dates and cultivated period on the growth characteristics, dry matter yield and feed value of Teosinte new variety "Geukdong 6"[Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis]for feed. The experimental design was arranged in a randomized block design with three replications. Treatments consisted of five time seeding dates, 10 May(T1), 25 May(T2), 10 June(T3), 25 June(T4) and 10 July(T5), and same time harvesting, 22 October. Therefore, growing period were 164 days(T1), 149 days(T2), 134 days(T3), 119 days(T4) and 103 days(T5), respectively. In growth stage at harvest time, T1, T2, T3, T4 and T5 were early flowering, end heading, middle heading, early heading and early heading stage, respectively. Plant length and dead leaf were highest in T1, but leaf width and number of leaf were highest in T2 than others (p<0.05). Leaf length, stem diameter and number of tiller were not significantly different among the treatments (p<0.05). Stem hardness was higher in order of T1(2.0)> T2(1.9) > T3=T4(1.7) > T5($1.2kg/cm^2$). Fresh yield and dry matter yield showed significantly higher as the sowing time was faster and the cultivation period was longer (T1 > T2 > T3 > T4 > T5, p<0.05). Crude protein, crude fat and TDN content were highest in T5, but ADF and NDF content were highest in T1 than others (p<0.05). T1, T2 and T3 showed significantly higher crude protein yield compared to T4 and T5 (p<0.05). Total digestible nutrients yield were higher in order of T1 > T2 > T3 > T4 > T5 (p<0.05), and relative feed value were higher in order of T5 > T4 > T3 > T2 > T1 (p<0.05). Based on the above results, seeding dates could be recommended from the early May to the late May, and it is efficient that the cultivation period is over 150 days for dry matter yield, crude protein yield and total digestible nutrients yield.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.261-272
• /
• 2018

This study was conducted to evaluate the difference in the quality of chicken thigh meat from conventional and animal welfare farms during refrigeration storage over 9 days. Chicken thigh meat from conventional (CTC, n = 30) and animal welfare farms (CTW, n = 30) was tested. The pH value was significantly lower in CTW (6.28) than in CTC (6.37) on day 1; however, no significant differences were found on subsequent days. The yellowness of CTW was higher than that of CTC on day 1, but CTW showed lower yellowness than did CTC on day 7 and 9. The cooking loss, water holding capacity, lightness, redness, and coliform levels of CTC did not show any significant difference when compared with CTW during storage. The shear force of CTW was significantly higher than that of CTC on day 1, 3, 7, and 9. Total microorganism and coliform in CTC and CTW increased with increasing storage days. On day 7 and 9, the total microorganism level of CTW was lower than that of CTC. The thiobarbituric acid value of CTW was lower than that of CTC on day 9. The volatile basic nitrogen (VBN) of CTW was lower than that of CTC during storage. Anserine content and 1,1-diphenyl-2-picryl-hydrazyl(DPPH) scavenging activity of CTW was significantly higher than CTC on day 1. These results suggest that CTW stayed fresher for longer than did CTC because of low total microorganism level on day 7 and 9, and VBN during refrigerated storage.