• Clean Technology
• /
• v.12 no.4
• /
• pp.224-231
• /
• 2006

Collection efficiencies and pressure drops for the removal of small particles from dilute liquid suspensions by granular bed filter were calculated using network model. The network model is composed of a number of nodes connected with cylindrical bond and particles are deposited on the bond surface. The collection efficiency of each cylindrical bond was predicted using unit cell model corresponding to the pore volume of cylindrical pore both at the initial and transient states. Deposited particles on the collector surface may act as additional collector and reduce the pore size of the collector. As a result, the collection efficiency was improved and pressure drop increased with deposition. Even though the stochastic nature of network requires a large number of simulation work, the model proposed in this study can be used in investigating collection efficiency and pressure drop.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.18-21
• /
• 2017

In this study, spherical monodispersed cerium-doped yttrium aluminum garnet (YAG : $Ce^{3+}$) phosphor particles were synthesized via homogeneous precipitation method using the mixed solution of yttrium nitrate, cerium nitrate, aluminum nitrate, ammonium aluminum sulfate, and urea as a precipitant. During the process of precursors of monodispersed YAG : $Ce^{3+}$, aluminum ions which form spherical aluminum compounds precipitated first and yttrium compounds precipitated onto the surface of the existing spherical aluminum compounds. Drying process using lyophilization could obtain monodispered spherical YAG : $Ce^{3+}$ particles compare to using oven. The thermal calcination process of YAG : $Ce^{3+}$ precursors under the temperature of $1200^{\circ}C$ for 6 h was enough to obtain 400~500 nm sized YAG particles with pure YAG phase.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.261-271
• /
• 2016

We have investigated relationship between particle characteristics of oyster shell powder pigments and their performance such as workability and durability. Three types of the powder which have different particle size and shape(spherical, elliptical, columnar and irregular) distributions were made for this study and we evaluated spreadability and uniformity for workability, and adhesion and surface hardness for durability of painted films by each powder paints. As a result, we found out that the workability and durability of the paints were influenced by the particle shape distribution more than the particle size distribution. The durability, especially, was enhanced as the ratio of columnar particles in the powders was increased. This result verifying the important factor affecting the durability can be base data for selecting oyster shell white paint and assessing its quality for conservation and restoration of Dancheong, as well as to produce high quality traditional paints.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.149-156
• /
• 1993

The formation of the graphite spherulites has been studied experimentally in the Ni-C liquid under high pressure and temperature. In the diamond-stable region the graphite spherulites were formed and grew stably. They were not the polycrystalline particles but the single crystals of the fullerene-type, respectively, grown spirally with much imperfection. And they were proved to be in a mixture state of carbon atoms with $sp^2$- and $sp^3$-bonding by an Auger electron spectroscope and a high resolution transmission electron microscope. As the pressure decreased from the diamond-stable region to the graphite-stable region, the shape of the graphite particles changed gradually from the sphere to the flaky shape. The formation of the graphite spherulites was attributed to the stable existence of the carbon atoms with $sp^3$ bonding in the diamond-stable region. The formation of the large fullerene-type graphite spherulites with much imperfection is well agreed with Kroto's prediction for growth of the giant fullerene.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1186-1190
• /
• 2009

In this paper, we studied on a characteristic of movement of charged particle in equal electric field. In order to fabricate a panel, we used positive charged toner particles of black and negative one of yellow. Panel was biased rectangle pulse without any overshoot. Also, panel's optical characteristics with contrast ratio and viewing angle is measured with RT-200. Response time was measure by using incident laser and detective photodiode. The distribution of m/q of particles by driving in panel throughout the contrast ratio and response time. As a results, driving voltage, contrast ratio, and response time are decided by m/q of charged particles and when m/q of charged particles in panel have regular distribution, it is induce improvement driving characteristics.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.730-734
• /
• 2019

Thermophoresis is a transport phenomenon of particles driven by a temperature gradient of a medium. In this paper, we discuss the thermophoresis of particles in microfluidic channels. In a non-fluidic, stagnant channel, the thermophoretic transport of micro-particles was found to be larger in proportion to the voltage applied to the platinum wire heat source installed in the channel. The variation of the temperature around the platinum wire depending on the voltage was estimated, by using the Callendar-van Dusen equation. The thermophoretic behavior of nano-particles in the same system was observed, which is similar to that of the microparticles. Finally, we fabricated a Y-shaped microfluidic channel with a platinum wire heat source installed in the channel, to realize the thermophoretic phenomenon of the particles in the suspension flowing through the channel. It is shown that the flow of the suspension can be controlled based on the thermophoretic principle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.262-262
• /
• 2009

최근 리튬이차전지가 전지자동차, hybrid car, PHEV, Ev, UPS 저장장치로 사용되기 시작함에 따라 고용량화, 고출력화가 요구되고 있다. 현재까지 주로 사용 되어왔던 carbon으로는 작동전압이 낮고, 고용량화, 고출력화가 어려워 금속산화물, 금속 비정질 금속 및 금속산화물을 carbon과 혼합 사용 함으로써 차세대 전지로서 특성을 달성하고 있다. 따라서 본 연구에서는 음극 소재로서 안정성이 뛰어난 금속산화물로 $Li_4Ti_5O_{12}$를 합성할 때 저가의 $TiCl_4$를 이용 $Li_4Ti_5O_{12}$가 고밀도를 갖게끔 $TiCl_4$를 이용 구형의 Ti-precursor(전구체)를 합성한 후 구형의 $Li_4Ti_5O_{12}$를 합성하였다. Ti전구체는 $TiCl_4$로부터 합성하였는데 이때 구형을 제조하고자 Hydroxypropyl cellulose(이하 HPC)를 사용하여 반응을 진행하였다. 이때 반응 조건 및 HPC의 몰수 변화에 따른 입자 형상의 변화에 관하여 관찰한 결과, $TiOCl_2$ 0.4mol, 반응온도 $10^{\circ}C$, 유지시간 6시간, HPC양 0.02mol일 때 $0.6{\mu}m$ 정도의 구형 Ti-전구체를 합성하였다. 합성된 Ti-전구체와 리튬수화물을 사용하여 $Li_4Ti_5O_{12}$를 합성 하였고, 상기 물질로 전지특성을 평가하였다.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.1
• /
• pp.13-20
• /
• 1991

The flacheric virus(FV) was isolated from the diseased larvae with flaccidity symptoms of the silkworm, Bombyx mori, which were collected in Hyangnam, Kyunggi Province and in Youcheon, Kyungpook Province. The properties of the virus were investigated and compared with the Japanese FV in morphology, size, nucleic acid and structural proteins. The Hyangnam isolate had a diameter of 27$\pm$1, 7nm with speherical shape and contained RNA of which the electrophoretic pattern was same as that of the Japanese FV. The virus had four sturctural proteins and their molecular weight were estimated as 35, 000, 33, 000, 31, 000, and 11, 400 daltons, respectively. The Youcheon isolate had two different sizeds in diameter of 27$\pm$1.7nm and 21$\pm$0.8nm. The antigenicity of the Hyangnam isolate was proved to be identical to that of Japanese FV, whereas the antisera against the Youcheon isolate (mixed with two different sizes) reacted with Japanese FV and densonucleosis virus type 1, respectively. From these characteristic of the isolated viruses, it was concluded that the Hyangnam isolate was identical to the Japanese FV and the Youncheon isolate contained the same viruses as the Japanese FV and DNVI.

• Polymer Science and Technology
• /
• v.15 no.4
• /
• pp.402-410
• /
• 2004

덴드리머란 중심 (core) 분자로부터 나뭇가지 모양의 단위구조가 반복적으로 뻗어 나오는 거대분자 화합물이다. 3차원적으로는 구형에 가까운 구조를 가지고 있으며 중심부는 상대적으로 낮은 밀도를 가지는 반면, 외곽으로 갈수록 가지의 밀도가 증가한다. 덴드리머는 구조적으로 잘 정의된 거대분자로써, 정확한 분자량과 구조를 예측하여 합성함으로써 나노 크기 의 입자 형성이 용이하다. 덴드리머의 최외곽에 존재하는 말단기는 덴드리머의 표면 성질 및 용해도 등에 결정적인 영향을 미치는 것으로 알려져 있으며, 표면의 밀집된 말단기에 다양한 유도체와 작용기 도입이 가능하다.(중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.325-325
• /
• 2007