• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.191-197
• /
• 2010

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1648-1653
• /
• 2003

This paper predicts the modified proportional damping structural eigenvectors and eigenvalues due to the change in the mass and stiffness of a proportional damping structure by iterative calculation of the sensitivity coefficient using the original dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom lumped mass model by modifing the mass and stiffness. The predicted dynamic characteristics are in good agreement with these from the structural reanalysis using the modified mass and stiffness.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.470-478
• /
• 2006

An efficient method for change of eigenvectors and eigenvalues due to the modifying proportional damping structure using sensitivity coefficients is presented. Sensitivity coefficients are determined by iteration with eigenvalue and eigenvectors before modification of system. The proposed method is applied to examples of 3 degrees of freedom system and plate by modifying mass and stiffness. The predicted change of eigenvectors and eigenvalues are in a good agreement with these from the structural re-analysis after modification of mass and stiffness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.109-116
• /
• 2013

Vibrations are generally recognized as the biggest concern in maintaining part' longevity of an All-in-one PC. The vibrations in PCs originate from excitation sources such as the HDD and the cooling fan. In this study, the vibrations from these sources were investigated in order to analyze the individual effects of the parameters on the structural vibrations of the PC; further, we attempted to establish design alterations that could successfully suppress vibrations, in order to achieve improved stability and part' longevity. The results show that relatively simple design alterations can substantially improve the stability of PCs.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.7-12
• /
• 2005

This study predicts the modified eigenvectors and eigenvalues of the damped structure due to the change in the mass, damping and stiffness of structure by calculation of the sensitivity coefficient using the original dynamic characteristic. The method is applied to examples of the damped 3 degree of freedom system by modifing the mass, damping and stiffness. The predicted dynamic characteristics are in good agreement with these from the structural reanalysis using the modified mass, damping and stiffness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.739-744
• /
• 2002

This study predicts the modified structural eigenvectors and eigenvalues due to the change in the mass and stiffness of a structure by iterative calculation of the sensitivity coefficient using the original dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom lumped mass model by modifing the mass and stillness. The predicted dynamic characteristics are in good agreement with these from the structural reanalysis using the modified mass and stiffness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

Sub-frame is a key component to damp the vibration of engine-born and isolate the input force from a ground. To enhance the performance of the sub-frame of vehicle, its structure should be designed to be a high performing mechanical filter that exclude the low frequency vibration elements. In this paper, a contribution analysis based on the frequency response function(FRF) is introduced to detect a high sensitive position of the target sub-frame and its results are validated with a SDM(structural dynamic modification) analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.365-368
• /
• 2004

This paper describes a MATLAB based SDM software embodied in a GUI environment (SDMTool), which is a technical high-end tool for structural dynamics modification (SDM) problems. The software is composed of four modules: 1) FE model linker module; 2) FE model updating module; 3) SDM forward problem module; 4) SDM structural optimization module. The software can be useful to engineers performing researches on structural dynamics modification and FE model updating.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.124-126
• /
• 2016

해안역에서의 대규모 개발은 파랑에너지의 전파에 상당한 변화를 초래한다. 특히, 항만내로 전파되는 파랑장을 변화시켜 기존의 에너지 전달체계에 큰 영향을 야기한다. 따라서, 이러한 파랑에너지의 변화를 사전에 예측하여 항만내의 선박이나 항만구조물의 피해를 막을 수 있다. 그러나 일반적으로 수행되는 항만내의 파랑장 검토 즉, 정온도 검토는 주로 공학적으로 문제가 되는 주기 10~20sec의 풍파와 너울성 파랑에 대하여 수행되고 있다. 그러나 실제 현장에서는 20sec 이상의 장주기 파랑에 의한 선박이나 항만구조물에 상당한 피해를 가져오기도 하지만 이로 인해 연간 부두 접안율이 낮아 항만운영에 어려움을 겪고 있다. 본 실험은 대규모 개발에 따른 장주기 파랑에 의한 반응특성과 부진동의 영향을 검토하였다. 특히, 항내 수제선에 개발이 집중적으로 이루어져 내륙측으로 항만수역을 보완하거나 변경이 어려운 경우 장주기파로 인한 부진동의 영향을 저감하기 위한 시도로 공진수역을 도입하였으며, 이에 대한 반응 특성을 분석하여 장래 항만 재배치 계획에 반영할 수 있는 근거가 될 수 있을 것으로 본다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.852-855
• /
• 2005

Structural Dynamic Modification(SDM) is a technique to improve structure's dynamic characteristics by adding and removing substructures or changing material properties and shape of structures. This paper describes SDM techniques applied to a large structure with too many DOFs. The goal of this SDM technique is to modify a targe structure efficiently for its natural frequencies to avoid excitation frequencies. In this case, models reduced by Component Mode Synthesis(CMS) method that is a coupling technique are used to analyze a large structure efficiently. This paper considers a helicopter deck model with 55,000 DOFs as an application.