• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.407-418
• /
• 2014

As a continuing work of previously conducted standard tension tests, full-scale flexural tests were conducted in this study to assess the structural performance the CJP groove welded joints connecting thick HSA800 plates. Two welding electrodes were available at the time of this experimental research; one was GMAW-based electrode A and the other FCAW-based electrode B. Three full-scale box-type beam specimens with single bevel- and V-groove CJP welded joints were fabricated from 60mm and 25mm thick HSA800 plates according to the AWS-prequalified groove welded joint details. In designing the specimens, all possible limit states like local and lateral torsional buckling were carefully controlled in order to induce flexural plastic yielding or eventual joint fracture. All the CJP joints made by both welding electrodes showed satisfactory performance and were able to transfer the tensile flange forces higher than that corresponding to the measured tensile strength of HSA800 flange plates. However, it should be noted that, during fabrication, serious concerns about the welding efficiency and workability of the GMAW-based electrode were raised by a certified welder. The fracture occurred at the unbeveled (or vertical) interface between the weldment and the base metal when the GMAW-based electrode was used in the single-bevel joint, implying the possibility of insufficient melting. Thus, the FCAW-based electrode B is again recommended as the choice of welding electrode for HSA800 plates. The limited test data of this study implies that the V-groove CJP joint should be used in favor of the single bevel CJP joint, if possible.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.4
• /
• pp.29-39
• /
• 2016

This paper presents the results of 2D and 3D finite element simulations conducted to analyze the effects of excavation depth (H), excavation width (L), and ground condition on the behavior of anchored earth retaining wall in inclined ground layers. The results of numerical analyses are compared with those of the site instrumentation analyses. Based on the results obtained, it appeared that 2D numerical analysis tends to overestimate the horizontal displacement of retaining wall compared to the 3D numerical analysis. When the excavation depth is deeper than 20m, it is found that 2D and 3D numerical analysis results of excavation work in soil ground condition are more different from the results in rock ground condition. For an accurate 3D numerical analysis, applying 3D mesh which has an excavation width twice longer than excavation depth is recommended. Consequently, 3D numerical analysis may be able to offer significantly better predictions of movement than 2D analysis.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.29-41
• /
• 2018

In the case of the enlargement levee on the soft foundation, the existing levee and the enlargement levee connection can be damaged due to heterogeneous subsidence such as differential settlement at the joint of the box culvert passing through the levee. This study selected the downstream region of the Geum River and then confirmed the influence of the piping possibility on the levee by performing a 2D seepage analysis and analyzing the seepage tendency according to the position of the box culvert's gate. As a result, the flow velocity and the hydraulic gradient are larger in the upper breakage than the lower breakage, and the upper leak was more vulnerable to the piping than the lower leak. If leaks occur in the gate located on the riverside land, the risk of piping is increased when the water level rises and is maintained highly. In the case of the gate located on the inland, it could be predicted that the leakage could damage the stability of levee by increasing the water pressure inside the levee. As a result, if leakage occurs at any position in the box culvert, the pore water pressure is increased or decreased compared with the case when no leakage occurs. Therefore, if the pore water pressure is drastically reduced or increased compared with the normal case, leakage may occur. However, the result of this study is based on a 2D seepage analysis, and it is likely to be different from actual cases. Therefore, more detailed analysis by 3D analysis is recommended.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.35-45
• /
• 2013

A autonomous vehicle requires improved and robust perception systems than conventional perception systems of intelligent vehicles. In particular, single sensor based perception systems have been widely studied by using cameras and laser radar sensors which are the most representative sensors for perception by providing object information such as distance information and object features. The distance information of the laser radar sensor is used for road environment perception of road structures, vehicles, and pedestrians. The image information of the camera is used for visual recognition such as lanes, crosswalks, and traffic signs. However, single sensor based perception systems suffer from false positives and true negatives which are caused by sensor limitations and road environments. Accordingly, information fusion systems are essentially required to ensure the robustness and stability of perception systems in harsh environments. This paper describes a perception system for autonomous vehicles, which performs information fusion to recognize road environments. Particularly, vision and laser radar sensors are fused together to detect lanes, crosswalks, and obstacles. The proposed perception system was validated on various roads and environmental conditions with an autonomous vehicle.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1031-1038
• /
• 2005

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of my existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an interconnection scheme between the wireless ad-hoc network environment based on multiple path source routing protocol and a Mobile-IP based network environment. This scheme reduces the overhead of route re-establishment and re-registration by maintaining multiple paths between the mobile host in wireless ad-hoc network and the base station in mobile-IP network. Also it puts the base station in charge of function that performs translation between wireless ad-hoc network packets and Mobile-IP packets, reducing the load of mobile hosts. In this paper, our simulations show that our scheme outperforms existing interconnecting schemes with regards to throughput and end-to-end delay Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.299-306
• /
• 2016

In this study, new hydroxyapatite powder surface composites were investigated for protective effects against ultraviolet rays. Hydroxyapatite (HAp) is biocompatible and does not cause nebula phenomenon on skin. We investigated the surface modification of hydroxyapatite to improve UV block and skin usage. Dimethicone, lauroyl lysine, triethoxycaprylylsilane and silica were used as coating agents for the surface modification of HAp. To prepare the composite complex of the modified surface, the dimethicone, lauroyl lysine and triethoxycaprylylsilane were prepared by a dry process, and silica by a hydrothermal synthesis method. The HAp-silica was chosen as the best composite powder when measuring its sun protection levels. We investigated the characteristics of the surface of HAp-silica by SEM, particle size analyzer and energy dispersive spectrometry (EDS). Additionally, the stability in the formulation, UV block effect, and safety in BB creams were investigated. In conclusion, HAp-silica prepared by the modification of HAp complex surface improved the skin usage and UV block effect by enhancing the white cloudy phenomenon. These results indicate that HAp-silica may be used for UV block cosmetics.

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.405-410
• /
• 2011

The aim of this study was to evaluate antibacterial effect of Cl coated titanium. To coat the Cl on the titanium, first, the titanium was modified by blasting treatment with hydroxyapatite and alumina powder. Anodization process was completed using electrolyte solution of 0.04 M ${\beta}$-glycerol phosphate disodium salt n-hydrate, 0.4 M calcium acetate n-hydrate and 1 M NaCl on the condition of 250 voltages for 3 min. Surface morphology and elements' observation were performed with scanning electron microscopy and energy dispersive spectroscopy and surface profiler was used to analyze the surface roughness. Antibacterial effect was evaluated by film adhesion method. The anodized titanium after blasting showed dimpled surface contained the Cl. Surface average roughness of these surfaces had significantly higher compared to polished titanium. Result of antibacterial test showed that anodized titanium after blasting had an enhanced antibacterial effect compared to the polished titanium. Therefore, these results suggested that titanium contained Cl by anodization after blasting had a rough surface as well as antibacterial effect.

• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.884-891
• /
• 2012

The characteristic of fish fauna and distribution by habitat type in the Yanghwa stream were investigated from August, 2008 to June, 2009. During the surveyed period, 30 species belonging 8 families were collected. And there were 10 Korea endemic species(33.3%), including Rhodeus uyekii et and so on. Dominant species was Rhodeus notatus, and subdominant species was Pseudorasbora parva. Dominant species according to habitat type was Pseudorasbora parva in Dam type pool and Channel conected pool, Pseudogobio esocinus(Run), Zacco platypus(Riffle), Rhodeus notatus(Side channel and Substrate type pool), Squalidus gracilis majimae(Meander type pool), and Carassius auratus(Channel unconnected pool), respectively. As a results of community analysis in the Yanghwa Stream, diversity, richness, and abundance indices showed relatively high values, indicating that studied stream have relatively stable community structure. Moreover, cluster and principal component analysis were divided by two groups(lotic and lentic habitats), suggest that species and individuals were different among habitat types.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.733-744
• /
• 2013

This study was launched in order to collect basic data such as emergent species, a succession trend based on the actual vegetation at the ridge from Haneoryoung to Daetjae, thereby designating 46 quadrats($10m{\times}10m:100m^2$). As a result of classification by TWINSPAN, the plant community was categorized into eight different communities, such as Pinus densiflora-Quercus mongolica-Fraxinus rhynchophylla, P. densiflora-Q. mongolica, Ulmus davidiana var. japonica, Q. mongolica-Deciduous Broad-leaved, Q. mongolica, Q. mongolica-Betula davurica, Q. mongolica-F. sieboldiana, and Larix kaempferi. An analyzation of each communities indicated that P. densiflora dominant community will change into a Q. mongolica dominant community if there are no outside artificial disturbances. U. davidiana var. japonica community maintains its present condition, because it doesn't appear to be a competitive species. In the case of Q. mongolica dominant community, if nothing comes in a competitive species against Q. monglica, it is possible to succeed to a muture stand. These communities with competitive species such as F. rhynchophylla, B. davurica that do not emerge at a canopy layer will gradually progress to the Deciduous Broad-leaved community. With regard to the species diversity index per unit ($400m^2$), succession processing communities (P. densiflora: 1.0477~1.1283) tend to be higher than succession-processed communities (Q. mongolica dominant: 0.6446~0.9424).