• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.737-743
• /
• 2016

Coastal hazards such as high waves are expected to increase due to global climate change. Therefore, we investigated new armor unit structures for disaster prevention. Recently, a concrete caisson has been used in many breakwaters against high waves in South Korea, but the demand for concrete armor unit has increased due to the high cost and many installation requirements. Though many new armor units have been developed over the world since Tetrapod in 1950, few have been used due to lack of systematical development. The representative armor units in current use have many advantages, but they cannot be applied to waves higher than 8 m. One of the new armor units developed by the design guide based on recent trend and hydraulic model experiments were conducted. The new armor unit was developed as a single layer due to cost effectiveness. However, the thickness is close to 1.5 times by overlapping the alphabet A and V. It showed higher overtopping compared to a double layer because of the thickness and the high packing density. It has a high interlocking vertically but low horizontally. It shows good stability at 9 m in model testing.

• The Journal of Engineering Geology
• /
• v.13 no.1
• /
• pp.107-127
• /
• 2003

After detailed geological mapping, structural and fracture-density data were collected and analyzed in the vicinity of Cheonseong and Jeongjok Mts., Gyeongsangnam-do. A extensive dextral strike-slip fault (Beopgi Fault) Parallel to Yangsan and Dongrae Faults, a dextral-transtensional-NW fault, and a few intermittent faults have been found in the study area. Based on strike and frequency, fracture system has been divided into three sets such as NNE-trending J1 ($NS-40^{\circ}E$), WNW-trending J2 ($N50^{\circ}-80^{\circ}W$), and ENE-trending J3 ($N60^{\circ}-90^{\circ}E$). According to analysis of fracture density, it is revealed as follows: (a) Jl is the combination of Y-, P-, and R-shear fractures due to the dextral strike-slip of the Beopgi Fault. (b) J2 is the preexisted fracture zone conducting the intrusion of granite. Two tensional fractures dipping to NNE and SSW respectively have been induced by intrusion of granite and followed crustal uplift. (c) J3 is the tensional fracture developed between Yangsan and Dongrae Faults having NNE trend and dextral strike-slip sense. This study aims to reduce environmental impact and insure stability of underground facilities and tunnels.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.921-928
• /
• 2004

Calcium phosphate powders have been prepared by using $Ca(OH)_2\;and\;H_{3}PO_4$ solution under various conditions such as pH, calcination temperature, and reaction time. ${\beta}-TCP({\beta}-tricalcium phosphate)$and HAp(hydroxyapatite) were synthesized at pH=5.21 and pH > 7.62, respectively. From XRD results, $Ca(OH)_2\;and\;H_{3}PO_4$ solution reacted quickly to form HAp, which was structurally stable up to 16h. Calcination temperature having good crystallinity is revealed to be at $1200^{\circ}C$. SEM analysis showed that ${\beta}-TCP$ and HAp with needle type were synthesized at pH 5.21 and pH 7.62, respectively. However, at pH 9.16, tiny and homogeneous HAp having sphere was prepared and rearranged to show needle morphology. HAp synthesized at pH 9.16 was utilized as bonechina body and calcined. The sample was analyzed its crystallinity, water absorbtion, color, and shape to check physical properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.791-799
• /
• 2015

This study focuses on the algae growth restraining. Many researches on a critical damage from algae growth are published, but it is hard to find how th restrain. Abnormal algae increasing is a problem, because it makes red tides, biodeterioration, etc. Therefore this study aims to decrease the damage from algae growth. Some metal ions have been used microorganism killing materials from old times. Especially, Cu ions are highly effective. Based on these uses of the metal ions, a functional mortar which restrains algae growth is developed. The mortar contains soluble glass which dissolve in water. The soluble glass was made of Cu ions and phosphates. When the soluble glass is dissolved, Cu ions are soaked out stably from the soluble glass. Culture mediums which incubate algae were made to evaluate the developed mortar specimens. Culture mediums were filled with fresh water and sea water. Algae were incubated for fourteen days in culture mediums. The evaluating methods are measuring volume of the dissolved organic carbon and the chlorophyll. Using these two measurements, the mortar specimens are judged that can restrain algae or not. According to the result, the functional mortars of culture medium filled with fresh and sea water shows similar trend. The functional mortar for restraining algae growth performs that's role well.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.27-39
• /
• 2010

Blast design equations based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of ground vibrations. These equations represents the minimum scale distance of various recommendations for safe blasting. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). Thus, the design equations have the forms of $D/\sqrt{W}{\geq}30m/kg^{1/2}$ and $D/\sqrt[3]{W}{\geq}60m/kg^{1/3}$ in the cases of SRSD and CRSD, respectively. With these equations and known distance, we can calculate the maximum charge weight per delay that can assure the safety of nearby structures against ground vibrations. The maximum charge weights per delay, however, are in the orders of $W=O(D^2)$ and $W=O(D^3)$ for SRSD and CRSD, respectively. So, compared with SRSD, the maximum charge for CRSD increases without bound especially after the intersection point of these two charge functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, we suggest that CRSD be used within a specified distance slightly beyond the intersection point. The exact limit is up to the point, beyond which the charge difference of SRSD and CRSD begins to exceed the maximum difference between the two within the intersection point.

• Microbiology and Biotechnology Letters
• /
• v.29 no.1
• /
• pp.18-24
• /
• 2001

Expression of the baculovirus major envelope glycoprotein gene(gp64) is regulated by transcription from botha early and late promoters. To develop a transient expression vector under the control of gp64 gene promoter, the gp64 gene of Bombyx mori nucleopolyhedrovirus-K1(BmNPV-K1) was characterized. The gp64 gene was local-ized at EcoR I-Pst I 7.38-kb fragment of the BmNPV-K1 genome. The EcorR 1-Pst I 7.38-kb fragment was cloned and the nucleotide sequence of 2,277 bases including the coding region of gp64 gene was determined. Based on these results, transient expression vector using gp64 gene promoter was constructed and named as pBm64. E.coli lacZ gene was introduced onto pBm64 as a reporter gene and expressed transiently in B. mori 5(Bm 5) cells. The expression vector transfected into the cells was maintained stably for 1 to 5 days. In order to confirm the expression of the reporter gene by gp64 promoter, recombinant virus was constructed. The recombinant virus has two independent transcription units in opposite orientations with two promoters; gp64 and polyhedrin gene promoters each initiating transcription of $\beta$-galactosidase and polyhedrin, respectively. Polyhedra formation and expression of $\beta$-galactosidase in Bm5 cells infected with the recombinant virus were observed with phase contrast microscope and in situ staining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.214-221
• /
• 2018

The purpose of this study is to analyze the shipbuilding structure of field tangerine by ten days and by month. By estimating and analyzing the price flexibility function of field tangerines, this study determines whether the shipment control can stabilize and increase the income of field tangerine farmers and provides policy implication. Considering the overall market, a 1% increase in shipment volume indicates that the coefficient of price flexibility varies with ten days and month. The greatest decline is from late October to early January. Therefore, a greater necessity of shipment control is required during late October and early January. The coefficient of the dummy variable (DUM_Q) indicates the year in which the quality declines is statistically significant and sign. The coefficient of the dummy variable (DUM02) represents the year in which more than 7 days after the New Year holidays are in February is statistically significant and sign from early October to late January. Therefore, it can be seen that the necessity of shipment control is more required when New Year holidays are in February. The greatest decline in the coefficient of price flexibility is from October to December. Therefore, a greater necessity of shipment control is required during October and December. The signs of coefficients of DUM01 and DUM_Q dummy variable of the price flexibility function suggest that the need for shipment control is more important when quality is worse than better quality and that the necessity of shipment control is more required when New Year holidays are in February, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.3
• /
• pp.191-198
• /
• 2009

The FAT (File Allocation Table) compatible file system has been widely used in mobile devices and memory cards because of its data exchangeability among numerous platforms recognizing the FAT file system. By the way. modern embedded systems have tough demands for instant power failure recovery and superior performance for multimedia applications. The key issue is how to achieve the goals of superior write performance and instant booting capability while controlling compatibility issues. To achieve the goals while controlling compatibility issues. we devised a temporary meta-data journaling scheme for a FAT compatible file system. Benchmark results of the scheme implemented in a FAT compatible file system shows that it really improves write performance of the FAT file system by converting small random write for meta-data update to a large sequential write in journaling area. Also, it provides natural way to implement the instant booting capability. Nevertheless, the file system compatibility is temporarily compromised by the scheme because it stores updated meta-data in the temporary journaling area rather than to their original locations. However, the compatibility can be fully recovered at any time by journal-flushing that copies meta-data in journaling area to their original locations. Generally, the journal-flushing is done before un-mounting a memory card so that it can be used in other mobile devices which recognized FAT file system but not the temporary meta-data journaling scheme.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.305-311
• /
• 2020

Rising sea levels along the coast from global warming causes the increase of wave energy along the coast. This rise in sea levels results in relatively deep water levels, which would incur the loss of sand that had not occurred in the past from erosion in coastal areas. Generally, it has been challenging to protect against coastal erosion, and the slope, cross-sectional shape, and materials are selected for the site conditions depending on the change in external forces. However, the application of counter measures based on insufficient understanding of the phenomenon is causing various damage, indicating the need for technological development and converging technologies to improve credibility. In this study, we developed eco-friendly permeable biopolymer concrete blocks to control the coastal erosion by using the Bio-Coast, an effective porous structure that mitigates the destructive erosion caused by the rising sea levels. The hexagonal design of Bio-Coast was derived from the honeycomb, columnar joints, and clover, which are durable and stable structures in nature, and the design was changed to apply bumps on the Bio-Coast filling in the form of a clover to reduce wave overtopping and run-up. Applying the field condition of beaches on the east coast of Korea, the block weight and size were decided and the prototype blocks were manufactured and are ready for field placement. In particular, it is intended to protect coastal areas from destructive erosion by natural and artificial external forces, and to extend the design to river,s lakes, and natural walking trails, to improve the efficiency of quality control and process control through the use of blocks.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.353-357
• /
• 2017

In this study, the inclusion phenomena of tetrahydrofuran + 3-hydroxytetrahydrofuran + $CH_4$ clathrate hydrates were explored via thermodynamic and spectroscopic approaches. The phase equilibria of the double hydrates - THF + $CH_4$ and 3-OH THF + $CH_4$ clathrate hydrates - were determined by pressure-temperature trace during hydrate formation and dissociation, and the result revealed that the equilibrium pressures were shifted to lower pressure region compared to pure $CH_4$ hydrate. The powder X-ray diffraction patterns revealed that the double hydrates of THF + 3-OH THF formed structure II type clathrate hydrates with $CH_4$. The dispersive Raman spectra of the double clathrate hydrates also exhibited that $CH_4$ can be trapped in both $5^{12}6^4$ and $5^{12}$ cages whereas THF and 3-OH THF were encaged in $5^{12}6^4$ cage.