• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.16-25
• /
• 2018

Concrete is a suitable construction material for long-term structure, however, it is needed to understand the calcium leaching damage caused by exposure to underground pure water for a long time. In this paper, it is experimentally investigated that the characteristics of flexural behavior in RC member damaged by calcium leaching degradation. From the test results, when calcium leaching is happened, yielding load and flexural rigidity is reduced, neutral axis depth and displacement is increased. That is, calcium leaching degradation adversely affects RC member performance. And, when the mineral admixture is used in the calcium leaching environment, it is considered that the optimal replacement ratio should be prepared according to the type of mineral admixture.

• Composites Research
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2008

This paper presents the evaluation of crashworthiness and rollover characteristics of low-floor bus vehicles made of aluminum honeycomb sandwich composites with glass-fabric epoxy laminate facesheets. Crashworthiness and rollover analysis of low-floor bus was carried out using explicit finite element analysis code LS-DYNA3D with the lapse of time. Material testing was conducted to determine the input parameters for the composite laminate facesheet model, and the effective equivalent damage model for the orthotropic honeycomb core material. The crash conditions of low-floor bus were frontal accident with speed of 60km/h. Rollover analysis were conducted according to the safety rules of European standard (ECE-R66). The results showed that the survival space for driver and passengers was secured against frontal crashworthiness and rollover of low-floor bus. Also, The modified Chang-Chang failure criterion is recommended to predict the failure mode of composite structures for crashworthiness and rollover analysis.

• Composites Research
• /
• v.25 no.2
• /
• pp.54-61
• /
• 2012

In this study, a specific structural design procedure for 2 MW class glass/epoxy composite wind turbine system towers is newly proposed through load case study, trade-off study, optimal structural design and structural analysis. Optimal tower design is very important because its cost is about 20% of the wind turbine system's cost. In the structural design of the tower, three kinds of loads such as wind load, blades, nacelle and tower weight and blade aerodynamic drag load should be considered. Initial structural design is carried out using the netting rule and the rule of mixture. Then the structural safety and stability are confirmed using a commercial finite element code, MSC NASTRAN/PATRAN. The finally proposed tower configuration meets the tower design requirements.

• Composites Research
• /
• v.33 no.3
• /
• pp.147-152
• /
• 2020

In this study, void behavior of composite laminate by local internal pressure gradient due to structural geometry and surface film application condition was experimentally evaluated through fabrication of spar/skin integrated structure specimens. Viscosity comparison and thermal analysis for both carbon fiber prepreg and surface film were conducted and cure characteristic and rate difference were analyzed. 2 types of spar/skin integrated structural specimens were prepared based on different application condition of surface film. Subsequently, those specimens were evaluated through visual surface inspection, non-destructive and destructive inspection. In a specimen #1 with full application of surface film, low pressurized area of composite laminate created by pressure gradient of structural geometry had voids. It exhibited that voids could not be evacuated and were locked in cured laminate by the influence of pre-cured surface film with relatively faster cure rate. In a specimen #2 without surface film, it revealed that all internal voids disappeared in the cured laminate. Therefore, it is verified that surface film acts as barrier film preventing void movement and evacuation during autoclave cure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.537-540
• /
• 2008

Up to now, the RC structures have been recognized as being socially semi-permanent. But in recent years there were reports about the cases of early deterioration of RC structures. Most of all pore structure effects on the durability of concrete as well as mechanical properties of concrete. Therefore, in this study, mixing design was proportioned with the water-binder ratio 0.55 binder compositions corresponding to cement without any supplementary materials(OPC), cement with 50% blast-furnace slag replacement (BFS50), cement with 15% fly ash replacement (FA15), and ternary cement with cement, 15% fly ash, and 35% slag replacement (BFS35+FA15). And this study is to compare pore structure property of concrete by carbonation to investigate the effect of the permeation of deterioration factors such as $CO_2$ and chloride ion under the combined deterioration environments. The results showed that pore volume effects on the diffusibility of chloride ion.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.23-33
• /
• 2023

It is widely known that the level of fire resistance of wooden structure is determined by a charring rate or charring depth, and these are adopted for fire design. In this study, specimens of domestic larch column with a lamination wooden type were prepared and the fire resistance properties such as the charring depth, load ratio and the specific charring rate suggested by EN Code investigated. Test results showed that as expected, the weakest part was the corner of the column, so that the charring depth of the corner was deeper than the other parts of the column. For the load ratio less than 0.9, it had little effect on the charring depth.

• Journal of Chest Surgery
• /
• v.31 no.8
• /
• pp.739-748
• /
• 1998

Background: It has been well documented that transient occlusion of the coronary artery causes myocardial ischemia and finally cell death when ischemia is sustained for more than 20 minutes. Extensive studies have revealed that ischemic myocardium cannot recover without reperfusion by adequate restoration of blood flow, however, reperfusion can cause long-lasting cardiac dysfunction and aggravation of structural damage. The author therefore attempted to examine the effect of postischemic reperfusion on myocardial ultrastructure and to determine the rationales for recanalization therapy to salvage ischemic myocardium. Materials and methods: Young Holstein-Friesian cows(130∼140 Kg body weight; n=40) of both sexes, maintained with nutritionally balanced diet and under constant conditions, were used. The left anterior descending coronary artery(LAD) was occluded by ligation with 4-0 silk snare for 20 minutes and recanalized by release of the ligation under continuous intravenous drip anesthesia with sodium pentobarbital(0.15 mg/Kg/min). Drill biopsies of the risk area (antero-lateral wall) were performed at just on reperfusion(5 minutes), 1-, 2-, 3-, 6-, 12-hours after recanalization, and at 1-hour assist(only with mechanical respiration and fluid replacement) after 12-hour recanalization. The materials were subdivided into subepicardial and subendocardial tissues. Tissue samples were examined with a transmission electron microscope (Philips EM 300) at the accelerating voltage of 60 KeV. Results: After a 20-minute ligation of the LAD, myocytes showed slight to moderate degree of ultrastructural changes including subsarcolemmal bleb formation, loss of nuclear matrix, clumping of chromatin and margination, mitochondrial destruction, and contracture of sarcomeres. However, microvascular structures were relatively well preserved. After 1-hour reperfusion, nuclear and mitochondrial matrices reappeared and intravascular plugging by polymorphonuclear leukocytes or platelets was observed. However, nucleoli and intramitochondrial granules reappeared within 3 hours of reperfusion and a large number of myocytes were recovered progressively within 6 hours of reperfusion. Recovery was apparent in the subepicardial myocytes and there were no distinct changes in the ultrastructure except narrowed lumen of the microvessels in the later period of reperfusion. Conclusions: It is likely that the ischemic myocardium could not be salvaged without adequate restoration of coronary flow and that the microvasculature is more resistant to reversible period of ischemia than subendocardium and subepicardium. Therefore, thrombolysis and/or angioplasty may be a rational method of therapy for coronarogenic myocardial ischemia. However, it may take a relatively longer period of time to recover from ischemic insult and reperfusion injury should be considered.

• The monthly packaging world
• /
• s.259
• /
• pp.93-101
• /
• 2014

유니소재화(Uni-materialization)란 제품의 설계단계부터 유해물질 사용을 줄이고, 자원순환 효율성을 높이기 위해 재질 단일화 또는 단순화 하는 것을 말한다. 유니소재(Uni-material)는 재질의 수를 줄이거나 제품의 구조개선을 통해 자원관리 및 자원순환을 촉진하는 일련의 활동을 통칭하는 것으로 유니소재화는 국제환경규제를 선도하고, 친환경적, 지속가능성, 선순환 물질흐름이 가능한 혁신적인 개념으로서, 통합성(Unity), 범용성(Universalization), 독창성(Uniqueness)의 성격을 지닌다. 포장재산업에 있어서 유니소재화 제품은 서용 후 포장재가 재활용 공정을 저해하지 않고 포장재의 재활용을 통해 고부가가치의 재생 제품을 얻을 수 있도록 하는데 있으며 포장재의 기본 기능은 유지하면서 사용하는 포장 재질의 단순화 또는 단일 포장 재질 사용, 동일 재질의 포장재로 구성될 수 있도록 설계 단계에서 유니소재화를 고려한 것을 말한다. 지난 호에 이어 국제환경규제 기업지원센터(www.compass.or.kr)의 자료제공 아래, 포장재 산업에서의 유니소재화 사례를 재질단일화, 재질 단순화, 포장요서의 분리용이성 측면에서 사례별로 살펴보도록 한다.

• The monthly packaging world
• /
• s.260
• /
• pp.106-115
• /
• 2014

유니소재화(Uni-materialization)란 제품의 설계단계부터 유해물질 사용을 줄이고, 자원순환 효율성을 높이기 위해 재질 단일화 또는 단순화 하는 것을 말한다. 유니소재(Uni-material)는 재질의 수를 줄이거나 제품의 구조개선을 통해 자원관리 및 자원순환을 촉진하는 일련의 활동을 통칭하는 것으로 유니소재화는 국제환경규제를 선도하고, 친환경적, 지속가능성, 선순환 물질흐름이 가능한 혁신적인 개념으로서, 통합성(Unity), 범용성(Universalization), 독창성(Uniqueness)의 성격을 지닌다. 포장재산업에 있어서 유니소재화 제품은 서용 후 포장재가 재활용 공정을 저해하지 않고 포장재의 재활용을 통해 고부가가치의 재생 제품을 얻을 수 있도록 하는데 있으며 포장재의 기본 기능은 유지하면서 사용하는 포장 재질의 단순화 또는 단일 포장 재질 사용, 동일 재질의 포장재로 구성될 수 있도록 설계 단계에서 유니소재화를 고려한 것을 말한다. 지난 호에 이어 국제환경규제 기업지원센터(www.compass.or.kr)의 자료제공 아래, 포장재 산업에서의 유니소재화 사례를 재질단일화, 재질 단순화, 포장요서의 분리용이성 측면에서 사례별로 살펴보도록 한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.321-326
• /
• 1997

소프트웨어 재사용은 새로운 소프트웨어 개발에 소용되는 시간과 비용을 현저히 감소시켜 소프트웨어 개발환경과 생산성을 향상시키는 방법으로, 소프트웨어 위기를 해결하기 위한 중요한 방법이다. 그러나 소프트웨어 부품을 위한 형식 명세서(formal specification)의 부족, 소프트웨어 재사용에 대한 부정적 심리적인 효과 등의 이유 때문에 현실적으로 재사용이 잘 이루어지고 있지 않다. 이러한 문제들을 해결하기 위해서는 부품의 품질 보증에 관한 연구가 소프트웨어 재사용에 관한 연구 분야에서 최우선적으로 이루어져야 하지만, 기존의 연구들은 일반적으로 설정된 재사용 품질 기준을 표준으로 하였으므로, 사용자의 요구가 복잡하고, 다양화되면서 소프트웨어의 크기, 알고리즘과 구조의 복잡도는 증가있는 변화하는 환경에 능동적으로 대처하지 못하고 있다. 그러므로 본 연구에서는 새로운 부품의 삽입과 기존 부품들의 삭제, 분류 기준의 변경 등의 환경 변화에 능동적으로 대처할 수 있는 적응성이 있는 재사용성 결정 모델을 제안한다. 이 모델은 적응성 있는 재사용 결정 알고리즘을 찾기 위해서 데이터에 숨겨진 패턴들을 발견하는 효율적인 알고 ？遲\ulcorner 제공하는 Rough set 이론을 이용한다.